Prologue
Good and sticky. Holds on to my batteries pretty well. . My only complaint is the 2 piece build. As you can see on the stock pictures, the velcro hooks is separate from the soft velcro/sticky piece. They've stiched it together but that has created a thicker section where the stitching occurs. On my 2 of my quad (zm x210 and zmr180 from fpvmodel) the slots for the straps are pretty snug and require a little extra work to thread thru, specially in the stitched section because not only is the section thicker due to the overlap in the pieces, but the stitching (although done well enough) leaves and bit of a flap that tends to snag when threading thru the slot. . With that said, the straps work, hold on to my batteries pretty well, and the threading thru the slot is not something i have to do constantly so overall 4 star. The Best 5 PACK 20mm x 200mm HD Rubberized Battery Straps Non-Slip - Apex RC Products #3030 as-of ( Oct 2021 ) | Apex Rc Products-Toys And Games Review Highlight 5 PACK 20mm x 200mm HD Rubberized Battery Straps Non-Slip - Apex RC Products #3030 Great for securing batteries and electronics. Works with quads, drones, helis, planes and cars. Non-slip rubberized coating - keeps batteries & electronics securely in place!. Fits most 3s-4s lipo batterys - perfect for most 250mm fpv racer batteries. We now pack these in a way to avoid the rubber from peeling off the strap when being unpacked .
5 PACK 20mm x 200mm HD Rubberized Battery Straps Non-Slip - Apex RC Products 3030 Review (LYSB01CJG5JV2-TOYS)
These are a nice product. I had a problem with my order getting heat damage in shipping, the seller was quick to send a replacement set at no cost. Thanks again for keeping your customers happy. So far the straps hold up well under a hard crash, but they will break and usually it is the plastic piece that hold the two pieces together. I will buy more of these straps because they are not to expensive and are good quality. -I. Newell
- Rank
- Toy
- Brand
- Apex RC Products
- EAN
- 0094393426721
- Product Dimensions
Weight: 0.5 pounds - Manufacturer
- Apex RC Products
- Suggested Min-Age
- 144
- MPN
- LYSB01CJG5JV2-TOYS
- Quantity
- 1
- Part/Serial Number
- LYSB01CJG5JV2-TOYS
- Group-Order
- Toy
- Category
- TOYS AND GAMES
- Product-Name
- 5 PACK 20mm X 200mm HD Rubberized Battery Straps Non-Slip - Apex RC Products #3030
- UPC
- 094393426721
Toy(094393426721:Toys And Games), 200mm Rubberized Battery Straps Non Slip (0094393426721:Apex Rc Products), Apex rc products is a company of radio control hobby enthusiasts that creates and carries products we use ourselves. all of our products are high quality at a great value. these battery straps have a non-slip rubberized coating to hold batteries and electronics securely in place..
200mm Rubberized Battery Straps Non Slip Toy
5 PACK 20mm x 200mm HD Rubberized Battery Straps Non-Slip - Apex RC Products #3030 (Switch to Mobile/Desktop Version)
Awesome, work great, on point quality. Had a couple crashes using these and they hold up. Sand the edges of your carbon fiber frame if you're using these for a quadcopter. It'll save them in a crash and avoid the need to replace them with every impact.
200mm Rubberized Battery Straps Non Slip (Toys And Games)Click to see Notice
200mm Rubberized Battery Straps Non Slip (Apex Rc Products)"Great price and rubber compound on the strap is good. The cinching buckle, or whatever it's called, gives me enough leverage to ensure my battery doesn't wiggle around. It's way better than the normal, bulk velcro straps i was using before. . My quad has fallen at over 30 feet, broken a leg, but the battery stayed in place."Frsky 3/16CH X Series Dual-way Receiver X4RSB w/Smart Port SBUS
Another wonderful purchase from this seller. Received the receiver on time and in new condition. These for me are the best for my 155 and 250 class fpv quads. They are small, light weight, and reliable. I use the smart port for telemetry info and run them in sbus. I love the built in failsafe in case the other decides to fail. Which ive had happen running a naze32 rev 6 and an orangerx 710. Fly aways are no fun. I recommend this for anyone running a frsky tx and need a small diversity receiver on their craft.
Brand name: frsky item name: frsky x4rsb 3/16ch telemetry receiver dimension: 40*22. 5*6mm (l x w x h) weight: 5. 8g operating range: full range ( 1. 5km) operating voltage range: 4. 0 10v operating current: 100ma 5v number of channels: 3/16ch (1 3ch from conventional channeloutputs, 1 16ch from sbus channel compatibility: frsky x-series module (xjt etc. ) taranis x9d in d16 mode(x4rsb is not work with d-series module)
Frsky-Dual-way-Receiver-X4RSB-Smart
See Frsky 3/16ch X Series Dual-way Receiver X4rsb W/smart Port Sbus (LYSB00VM1XWB0-TOYS) FAQ.
I'm a huge fan of the x4rsb receivers. They fit perfectly inside my 250 race quads and the range and the range of the signal is outstanding. I mount both antennas on plastic zip-ties sticking up out of the frame. One other great thing about the x4r is that the antennas are connected via small connectors, so when you do chop an antenna they are easy and cheap to replace. I've bought several of these and they all work great! -Notice from B. Sally, Havering
Click to Show frsky 3/16ch x series dual-way receiver x4rsb w/smart port sbus (lysb00vm1xwb0-toys) Details
Yes sbus is great to used better response so newer f3 board accept sbus so i am making the switch this will do it
- J. SusanThis is by far my favorite receiver to use with my taranis transmitter. I always de-pin mine and direct solder the wires to make it smaller and lighter. Not much else to say about it, it just works and works well. My only complaint is the newer versions that are being shipped are using a different connector for the antenna cables and i bought a bunch of antenna replacement cables a while back because if you are flying a lot, you will damage the cables over time. I can't use any of those cables i bought on the newer x4r-sb units i've received this week. I can't find replacement cables anywhere for them either. For this reason, i am only giving this 4 stars. If they had kept the antenna connectors the same or documented what the new connector is called or where to get replacement cables, i'd have gladly given this a 5 star review.
Great receiver for a great value. I have a taranis x9d plus, and all my quads and airplanes run this. Works perfectly any time, and hasn't failsafed on me yet. Antennas are a little long, but take a straw and you can secure them almost anywhere you want. Built in telemetry also tells you battery voltage, which is what use to tell me when to land.
Z. Rowe, Surrey
| FRSKY 3/16CH X SERIES DUAL-WAY RECEIVER X4RSB W/SMART PORT SBUS Feature | |
|---|---|
| Brand : | frsky |
| Weight : | 0.2 pounds |
| |
| Model : | LYSB00VM1XWB0-TOYS |
| Quantity : | 1 |
| Order click here : | normally ships in 24 hours |
| Toy : | Best Toys And Games (frsky product review) for Frsky 3/16CH X Series Dual-way Receiver X4RSB w/Smart Port SBUS available as-of ( Oct 2021 ) |
Vicdozia 2.5mm Replacement 170 Degree Wide Angle Camera DV Lens Gopro HD Hero 1 2 SJCAM SJ4000 HS1177 FPV Runcam Swift Camera
Vicdozia 2. 5mm replacement wide angle camera lens 170 m12 lens for gopro hero1 hero2 hero3 sj4000 hs1177 fpv runcam swift rc racing quadcopter drones, suptig cameras. Great replacement for your damaged, cracked, marked or dirty lens! specifications: viewing angle: 170 ; focal length: f2. 65 mm; aperture range: 2. 8. Sensor size: 1/2. 5" thread size: 12mm*0. 5 material: hard glass + tough metal compatible with: gopro hero, hero 2, hero 3, sjcam sj4000 sj5000 series, hs1177 runcam swift flight fpv quadcopter racing drones etc. Please note, this lens not fit for gopro hero 3+(plus)/ hero 4/ hero 5. Package include: 1 x wide angle lens replacement 1 x lens cover 1 x base holder warranty: 1. The product was fulfilled by online store, you will receive it faster. 2. If you have any questions or requests, please feel free to contact us, we will answer you within 24 hours. 3. 1 year quality assurance by vicdozia.
Vicdozia-Replacement-Degree-Camera-SJ4000
| VICDOZIA 2.5MM REPLACEMENT 170 DEGREE WIDE ANGLE CAMERA DV LENS GOPRO HD HERO 1 2 SJCAM SJ4000 HS1177 FPV RUNCAM SWIFT CAMERA Highlight | |
|---|---|
| |
| Brand : | vicdozia |
| Weight : | 0.3 pounds |
| Model : | 0012 |
| Quantity : | 1 |
| Order click here : | normally ships in 24 hours |
| Photography : | Best Camera Other Accessories (vicdozia product review) for Vicdozia 2.5mm Replacement 170 Degree Wide Angle Camera DV Lens Gopro HD Hero 1 2 SJCAM SJ4000 HS1177 FPV Runcam Swift Camera available as-of ( Oct 2021 ) |
NIDICI 50pcs FPV M3 Sponge Mat Landing Skid Pad Gear Anti-vibration QAV-R 220 QAV-X QAV ZMR 130/180/210/214/250 Frame Quadcopter
These pads are great and do a great job of protecting the bottom of my fpv quad.
100% brand new 3m shockproof mounting pads for from 180 to 300mm mini multi-rotor quadcopter just like :diy mini zmr180 qav210 qav-r 220 qav250 zmr250 etcs fpv racing quadcopter feature: 1, super light 2, strengthen shockproof 3, better than aluminum column 4, anti-static 5, 10mm thickness include 50pcs not included:frame and other accessories note:iflight ix5 200mm racing drone is new and good style product . (not include), fit for fpv racing game very well please check follow listing:
NIDICI-Sponge-Landing-Anti-vibration-Quadcopter
See Nidici Sponge Landing Anti Vibration Quadcopter (Toys And Games) FAQ.
Good product good price. Yea shipping is slow, but so much cheaper and more than you should ever need. -Notice from Z. Mathis, Western Australia
Click to Show nidici sponge landing anti vibration quadcopter (toys and games) Details
Work great. I used an exacto knife to cut a couple up and make feet for my little micro quad, too.
- I. SmithExcellent. Quality sponge mat landing skid for 200mm plus aircrafts. Being used on my custom built robocat270 and provides plenty of impact support as well give better low drag design for your aircraft as long as your essential accessories are not located below the belly of your haul.
These are great! but they are much bigger then i thought, but will still work for what i need.
K. Kathlene, Telford and Wrekin
| NIDICI 50PCS FPV M3 SPONGE MAT LANDING SKID PAD GEAR ANTI-VIBRATION QAV-R 220 QAV-X QAV ZMR 130/180/210/214/250 FRAME QUADCOPTER Advantages | |
|---|---|
| |
| Brand : | nidici |
| Model : | NA |
| Quantity : | 1 |
| Order click here : | normally ships in 1-2 business days |
| Toy : | Best Toys And Games (nidici product review) for NIDICI 50pcs FPV M3 Sponge Mat Landing Skid Pad Gear Anti-vibration QAV-R 220 QAV-X QAV ZMR 130/180/210/214/250 Frame Quadcopter available as-of ( Oct 2021 ) |
Rosiness 180Pcs M3 Nylon Hex Spacers Screw Nut Stand-off Plastic Accessories Assortment Black
Total 180 pieces. Come with the plastic box: spacers male-female (6mm + 6mm, m3 )10pcs spacers male-female (8mm + 6mm, m3) 10pcs spacers male-female (10mm + 6mm, m3) 10pcs spacers male-female (12mm + 6mm, m3) 10pcs spacers male-female (15mm + 6mm, m3) 10pcs spacers male-female (20mm + 6mm, m3) 10pcs screws ( m3 x 6mm ) 60pcs nuts (m3) 60pcs package include: 1 nylon hex screw nut assortment kit
Rosiness-M3-Stand-off-Accessories-Assortment
| ROSINESS 180PCS M3 NYLON HEX SPACERS SCREW NUT STAND-OFF PLASTIC ACCESSORIES ASSORTMENT BLACK Highlight | |
|---|---|
| Brand : | rosiness |
| Color : | Black |
| Model : | M3 |
| Order click here : | normally ships in 24 hours |
| Home Improvement : | Best Tools (rosiness product review) for Rosiness 180Pcs M3 Nylon Hex Spacers Screw Nut Stand-off Plastic Accessories Assortment Black available as-of ( Oct 2021 ) |
| |
LHI 2PCS WRA0053 XT60 Male W/14awg Silicon Wire 10cm
Fits perfectly
LHI-2PCS-WRA0053-14awg-Silicon
| LHI 2PCS WRA0053 XT60 MALE W/14AWG SILICON WIRE 10CM Advantage | |
|---|---|
| Brand : | lhi |
| Model : | LHIXT602PCS |
| Order click here : | normally ships in 24 hours |
| Toy : | Best Hobbies (lhi product review) for LHI 2PCS WRA0053 XT60 Male W/14awg Silicon Wire 10cm available as-of ( Oct 2021 ) |
| |
Tattu LiPo Battery Pack 1300mAh 45C 4S 14.8V XT60 Plug RC Boat Heli Airplane UAV Drone
Details: brand: tattu capacity(mah): 1300mah voltage(v): 14. 8v discharge rate (c): 45c max burst discharge rate (c): 90c configuration: 4s1p net weight(dev. 20g): 154g length(dev. 5mm): 72mm width(dev. 2mm): 37mm height(dev. 2mm): 30mm connector type: xt60 plug wire gauge: awg12 wire length(mm): 100mm balancer connector type: jst-xhr overview tattu is the world first battery brand who only focus on supplying power for drones, uav, uas and fpv products. Dedicating to providing better flight experience, tattu has been continuously putting great efforts in technology research & development and now has become the most famous and professional uav battery brand over the world. Features: 1. Superior japan and korea lithium polymer raw materials. 2. Automatic stacking technology, better performance 3. Strict matching progress, excellent consistency 4. Up to 200wh/kg energy density 5. Long cycle life (150 times minimum) 6. Local after-sales service(located in dublin, ca) notes: 1. Shipments fulfilled by seller are shipped from dublin, ca(can only shipped within usa and canada). 2. For any questions, pls feel free to contact us through "your orders" tab of your online store account, we will respond within one business day. 3. All rights reserved by gensace&tattu.
Tattu-Battery-1300mAh-14-8V-Airplane
| TATTU LIPO BATTERY PACK 1300MAH 45C 4S 14.8V XT60 PLUG RC BOAT HELI AIRPLANE UAV DRONE Features | |
|---|---|
| Brand : | tattu |
| Weight : | 0.34 pounds |
| Model : | TA-45C-1300-4S1P |
| Quantity : | 1 |
| Order click here : | normally ships in 24 hours |
| Toy : | Best Toys And Games (tattu product review) for Tattu LiPo Battery Pack 1300mAh 45C 4S 14.8V XT60 Plug RC Boat Heli Airplane UAV Drone available as-of ( Oct 2021 ) |
| |
5 PACK 20mm x 300mm HD Rubberized Battery Straps Non-Slip - Apex RC Products 3031
These battery straps have a non-slip rubberized coating to hold batteries and electronics securely in place.
300mm-Rubberized-Battery-Straps-Non-Slip
| 5 PACK 20MM X 300MM HD RUBBERIZED BATTERY STRAPS NON-SLIP - APEX RC PRODUCTS 3031 Highlight | |
|---|---|
| Brand : | apex rc products |
| Weight : | 0.35 pounds |
| Model : | 3031 |
| Quantity : | 5 |
| Order click here : | normally ships in 24 hours |
| |
| Toy : | Best Toys And Games (apex rc products product review) for 5 PACK 20mm x 300mm HD Rubberized Battery Straps Non-Slip - Apex RC Products 3031 available as-of ( Oct 2021 ) |
LHI 7 Colors RGB 5050 LED Strip Night Light 12V DIP Switch 30mm Wire ZMR250 QAV250 FPV 250 RC FPV Quadcopter 4PCS
Product description: the led is suitable for light diy on mutirotor, airplane, helicopter, rc car etc. This led adopts 3 pieces of rgb 5050 lamp beads, with dip switch on board. According to toggle different switch combination, the led can switch among 7 colors. Working voltage: 10-13v dc dimension: 42x10mm weight: 1. 8g note: 1. The parcel comes with a 30cm black and red power wire. User can cut it to the proper length according to real use. 2. Pay attention to the "+" and "-" and insulation 3. Toggle the switch on to different channel to choose 7 color 4. We suggest use double side tape to paste the led lights on frame 5. The output voltage of the 12v version is between 10-13v, either 3s lipo battery or 12v bec can power it. When the output is 12v, the power and current of the led: b on blue 0. 35w, 0. 03a r on red 0. 35w, 0. 03a g on green 0. 35w, 0. 03a b + r on purple 0. 70w, 0. 06a b + g on cyan 0. 70w, 0. 06a r + g on yellow 0. 70w, 0. 06a b + r+g on white 1. 05w, 0. 09a
LHI-Colors-Switch-ZMR250-Quadcopter
| LHI 7 COLORS RGB 5050 LED STRIP NIGHT LIGHT 12V DIP SWITCH 30MM WIRE ZMR250 QAV250 FPV 250 RC FPV QUADCOPTER 4PCS Reviews | |
|---|---|
| Brand : | lhi |
| Model : | LHI-LED-BOARD |
| Order click here : | normally ships in 24 hours |
| Toy : | Best Hobbies (lhi product review) for LHI 7 Colors RGB 5050 LED Strip Night Light 12V DIP Switch 30mm Wire ZMR250 QAV250 FPV 250 RC FPV Quadcopter 4PCS available as-of ( Oct 2021 ) |
| |
Tattu LiPo Battery Pack 1300mAh 75C 4S 14.8V XT60 Plug RC Boat Heli Airplane UAV Drone FPV
These are very powerful batteries for their size. They deliver plenty of juice to the motors, although the high amp delivery may slightly decrease flight time by a few seconds but not by many. I believe these batteries were made for racing although i am not totally sure. I dont race quadcopters so far but i like to fly fast and they certainly allow me to do that!
Details: brand: tattu capacity(mah): 1300mah voltage(v): 14. 8v discharge rate (c): 75c max burst discharge rate (c): 150c configuration: 4s1p net weight(dev. 20g): 155g length(dev. 5mm): 72mm width(dev. 2mm): 36mm height(dev. 2mm): 29. 4mm connector type: xt60 plug wire gauge: awg12 wire length(mm): 100mm balancer connector type: jst-xhr overview tattu is the world first battery brand who only focus on supplying power for drones, uav, uas and fpv products. Dedicating to providing better flight experience, tattu has been continuously putting great efforts in technology research & development and now has become the most famous and professional uav battery brand over the world. Features: 1. Superior japan and korea lithium polymer raw materials. 2. Automatic stacking technology, better performance 3. Strict matching progress, excellent consistency 4. Up to 200wh/kg energy density 5. Long cycle life (150 times minimum) 6. Local after-sales service(located in dublin, ca) notes: 1. Shipments fulfilled by seller are shipped from dublin, ca(can only shipped within usa and canada). 2. For any questions, pls feel free to contact us through "your orders" tab of your online store account, we will respond within one business day. 3. All rights reserved by gensace&tattu.
Tattu-Battery-1300mAh-14-8V-Airplane
See Tattu Battery 1300mah 14 8v Airplane (TA-75C-1300-4S1P) FAQ.
Currently own 7 tattu batteries, have flown many times with the original couple that i purchased and and have had no problems - even got the 1550 stuck in a tree overnight - battery was at 2. 3 volts and was able to revive with no puffing and all cells are balanced perfectly. Figured i'd get some more as you go through these in around 2 - 3 minutes (depending on how hard you push them, like to return back around 3. 8 volts per cell). . However, my last order of 3 had one dud, flown less than 5 times and the battery has a bad cell. However, i think it may have been damaging in shipping or a crash of my own fault - bottom of battery has a minor dent in it (always fly in grassy areas though). Might be good idea to inspect each battery right away in case it was shipping related. -Notice from Y. Finch, Lewisham
Click to Show tattu battery 1300mah 14 8v airplane (ta-75c-1300-4s1p) Details
Beautiful battery in every way . Its a great battery for acro flying! this battery provides the punch you need when you need it! . I fly every day (15 packs) that means these batteries get some use! i've had no swelling, and little to no wearing of power over a 3 month period, that's 90 plus re-charges! how can you beat that! i'm pushing them pretty hard as far as i'm concerned, with 2205/2400 kv motors and 30a esc's with 5045-3 dal t-props to boot!
- Q. TraceyGood battery. Grabbed this one, and a 1300mah. Used about a dozen times each so far. Neither had gotten "puffy". Gives a solid 5 min of pretty aggressive use with my set up. I always set my low voltage alert to 3. 5 to be safe; others set it a lot lower. Also, the balance connectors on this battery are a lot better than any other battery i've owned. They've attached a plastic guard around the wired connections so they can take some abuse. Tattu def has a repeat customer.
I purchased a couple these to use in an imersion vortex quad. This past weekend my son and i got a chance to go out and put the batteries through several hard flights. They are well made and a very good quality battery. I was impressed enough that i just purchased three more. Time will tell how well they hold up after a season but i am anticipating they will have a similar holding power like a thunder power or luminer type battery pack. I will update this review if i find anything new to report.
E. Anonymous, Schleswig-Holstein
| TATTU LIPO BATTERY PACK 1300MAH 75C 4S 14.8V XT60 PLUG RC BOAT HELI AIRPLANE UAV DRONE FPV Spotlight | |
|---|---|
| Brand : | tattu |
| Color : | black |
| Weight : | 0.35 pounds |
| Model : | TA-75C-1300-4S1P |
| Quantity : | 1 |
| Order click here : | normally ships in 24 hours |
| |
| Hobby : | Best Toys And Games (tattu product review) for Tattu LiPo Battery Pack 1300mAh 75C 4S 14.8V XT60 Plug RC Boat Heli Airplane UAV Drone FPV available as-of ( Oct 2021 ) |
180Pcs M3-Hex-Spacers-Screw-Nut-Standoffs DIY Quadcopter Drone, PC mods, Raspberry Pi board - HOBBYMATE
Total 180 pieces. Come with the plastic box: spacers male-female (6mm + 6mm, m3 )10pcs spacers male-female (8mm + 6mm, m3) 10pcs spacers male-female (10mm + 6mm, m3) 10pcs spacers male-female (12mm + 6mm, m3) 10pcs spacers male-female (15mm + 6mm, m3) 10pcs spacers male-female (20mm + 6mm, m3) 10pcs screws ( m3 x 6mm ) 60pcs nuts (m3) 60pcs package include: 1 nylon hex screw nut assortment kit in box
180Pcs-M3-Hex-Spacers-Screw-Nut-Standoffs-Quadcopter-Drone-Raspberry
| 180PCS M3-HEX-SPACERS-SCREW-NUT-STANDOFFS DIY QUADCOPTER DRONE, PC MODS, RASPBERRY PI BOARD - HOBBYMATE Summary | |
|---|---|
| Brand : | hobbymate |
| Color : | Black |
| Model : | NY180 |
| Quantity : | 1 |
| Order click here : | normally ships in 24 hours |
| |
| Home Improvement : | Best Hardware (hobbymate product review) for 180Pcs M3-Hex-Spacers-Screw-Nut-Standoffs DIY Quadcopter Drone, PC mods, Raspberry Pi board - HOBBYMATE available as-of ( Oct 2021 ) |
