Beebrain V 1 Cleanflight Betaflight Compatible (Newbeedrone) 5742

Review for beebrain cleanflightbetaflight

Price was 0. Works as expected

-M. Clara

Beebrain v.1 – cleanflight/betaflight compatible flight controller tiny whoop – dsmx dsmx (spektrum) version. the world’s first dsmx compatible, betaflight ready, born for acro flight controller for the tiny whooptm/beeductrix/inductrix quad! full cleanflight/betaflight compatibility -beebrain v.1 – cleanflight/betaflight compatible flight controller tiny whoop – dsmx spektrum

  • Feature: Beebrain-v1-dsmx-spectrum.

Reasonable Beebrain V 1 Cleanflight Betaflight Compatible (Toys And Games)

Buy Now

Prologue

As descibed. Works like a charm! use the rubber grommets! didn't think i would need them, but why whoop couldn't fly without them. The Best beebrain cleanflightbetaflight as-of ( Mar 2021 ) | Newbeedrone-Toys And Games Review Feature BEEBRAIN V.1 - CLEANFLIGHT/BETAFLIGHT COMPATIBLE FLIGHT CONTROLLER FOR THE TINY WHOOP - DSMX (Spektrum) Newbeedrone. Beebrain-v1-dsmx-spectrum .

Beebrain V.1 - Cleanflight/betaflight Compatible Flight Controller For The Tiny Whoop - Dsmx Spektrum Review (beebrain v1 dsmx spectrum)

This has unleashed my inductrix in a way that i was exactly hoping to get out of it, in combination with luminier 19, 000 kv motors, it makes for one heck of a micro drone. My only real annoyance is, this is my third one to purchase, my first being my own fault (crashed into a pot of water) but the second time has me a little baffled, i did a normal frame swap as per usual, but as soon as i had it all nipped and tucked, i plugged the battery in, and puff! a little unsettled by this, its not the end of the world, but annoyed that i don't know what i might have done to have caused this. -C. Eva

Beebrain V 1 Cleanflight Betaflight Compatible

  1. Class: Toy
  2. Brand: NewBeeDrone
  3. EAN: 0768684790180
  4. Manufacturer: NewBeeDrone
  5. Suggested Min-Age: 168
  6. MPN: Beebrain-v1-dsmx-spectrum
  7. Part/Serial Number: Beebrain-v1-dsmx-spectrum
  8. Type: Toy
  9. Category: TOYS AND GAMES
  10. UPC: 768684790180

beebrain v.1 - cleanflight/betaflight compatible flight controller tiny whoop - dsmx Toy, Dsmx (spektrum) version. the world's first dsmx compatible, betaflight ready, born for acro flight controller for the tiny whooptm/beeductrix/inductrix quad! full cleanflight/betaflight compatibility on a stm32 f103 naze32 style processor. it uses a f1 processor instead of f3 due to the lighter weight and less complexity of the f1 design.   fully programmable through cleanflight/betalfight using the onboard usb port! tune all the parameters, pid's, and rates to your perfect settings! finally, you can fly your tiny whoop quad in full rate mode,  fully execute flips,  rolls, and shoot the smallest of gaps with precision! tuned to give you that locked in feeling you get with standard race quads. there are two versions available: frsky and dsmx compatable. no more hacks or orange rx modules required, just bind and fly! please select the option that is right for you when making your purchase. this board is designed to work with current tiny whooptm/beeductrix/inductrix setups, just replace the current board with our new beebrain vr. 1 board and experience the next level of flight control. Beebrain V 1 Cleanflight Betaflight Compatible (-Newbeedrone).

Beebrain V 1 Cleanflight Betaflight Compatible Toy

beebrain cleanflightbetaflight BEEBRAIN V.1 - CLEANFLIGHT/BETAFLIGHT COMPATIBLE FLIGHT CONTROLLER FOR THE TINY WHOOP - DSMX (Spektrum) (Switch to Mobile/Desktop Version)

Beebrain v. 1 dsm version. . Great board for micro builds, namely tiny whoop / inductrix frames. Was a slight learning curve because i had to use betaflight for the first time to do the configuration and flashing etc. But was easy enough. Since buying this and getting it installed and zipping around the house, i've ordered another one, so yeah. I like it! . . Pros. - solid design, decent documentation and information available. - handles motors/power well up to the 6515-19 (insane) motors. - includes all mounting hardware, mine had extra screws etc. (nice). - dsm version binds without soldering or pushing a button. - could flash firmware without soldering boot pins. . Cons. - slightly more expensive than competitor offerings for similar fc. - does not have leds for orientation or lvc warning. - usb connector not in an ideal place if using rakon cf/cnc frames but creative build/mounting techniques can over come this in those cases. I was lucky, i can bend the battery holder back just enough to plug in my slim usb, but fortunately after getting it setup, not much need to connect it frequently anyway. . I'm stuck with using the stock dsmx inductix controller because buying another radio just to fly micro's doesn't make sense for me. I don't think i'm the only one out here that has a 10j with 4 or more models containing the rather expensive t-fhss radios. 4 or more t-fhss receivers cost more than a taranis! . . I initially had some issues getting this to fly stable in angle mode, with tuning i was able to sort it out but it had a strange yaw to the right that i had to max out the trim on radio to keep it straight but yaw control became weird (stock inductrix controller). Once i flashed with the latest betaflight, (newer than what was on it) those issues went away and it flies great! . . * i am happy with the fc but wish there was a version with built in s-fhss radio for futaba. Everyone doesn't have taranis or fi6. *. How about tossing some s-fhss radio chips in the robot arm feed for soldering radio chips onto the board. Anyone? lol. . Note: dsm version users. Newbeedrone has a link in the manual for dsm version with information on how to setup the inductrix stock controller. It is a good video but they show you how to reverse yaw and roll on the transmitter, which was clever. And i didn't know you could do that but it isn't necessary. In the cli, just reverse the numbers for those 2 channels. Instead of rxrange ? 1180 1860 make it rxrange ? 1860 1180. This will reverse it in the fc config and you can leave the transmitter settings as they were. This is useful if you still have the stock inductrix or other quads using the same transmitter. Fyi, for those who don't know, you can also reverse aux switches the same way, just reverse the aux channel number the same way from the cli.

Beebrain V.1 - Cleanflight/betaflight Compatible Flight Controller Tiny Whoop - Dsmx Spektrum
Click to see NoticeBeebrain V 1 Cleanflight Betaflight Compatible (Newbeedrone)"Love this board with 19, 000kv motors and a jst-ph 2 battery connector."


Airplanes & Jets » Cars » Crawlers » Helicopters » Quadcopters & Multirotors » Ships & Submarines » Tanks » Trucks » Action & Toy Figures » Die-Cast & Toy Vehicles » Games » Novelty & Gag Toys » Puzzles » Executive Desk Toys » Beebrain V 1 Cleanflight Betaflight Compatible (Toys And Games)


Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Bonus Rubber Rings

Bought these for my tired worn inductrix. Quality over quantity is the rule here because my flight times are significantly reduced with the same lipos, but oh, what a flight! the aircraft has gone from outrageously fun to insane! pirouetting funnels are things i could only do in the first minute or so of flight because i didn't have enough power to sustain the maneuver. Now, i can punch through whatever my sticks can dish out pretty much until the end of the battery.

Description: motor diameter: 6mm motor length: 15mm shaft diameter: 0. 8mm cable length: 56mm weight: about 1. 8g no load speed: 65000 15% rpm rated load speed: 38500 15% rpm motor wire: clockwise motor(with red blue), anti-clockwise motor(with black white) option: with 1. 25mm jst plug quantity: 4 pcs (2 cw and 2 ccw) work for blade inductrix, tiny whoop, nano qx etc. Package including 2 * cw motor 2 * ccw motor

Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Bonus Rubber RingsCrazepony-4pcs-6x15mm-Motor-Speed

Crazepony 4pcs 6x15mm Motor Speed (8145949tqca5281) FAQ.

I highly recommend these motors if you're making an e010 tinywhoop. When i had the stock motors, i would frequently lose lift, especially when doing 180deg turns. These motors allow me to fly comfortably at 50% - 60% throttle and have nice punch when i gun it! i haven't experienced any quality problems, but i did notice these motors get hot compared to stock. I recommend letting them cool a bit before slapping another battery in. They were an exact color match for wires with my eachine e010 also, so they were a breeze to install. All in all these can't be beat in my opinion, and for about $10! -Notice from P. Russell, Thueringen

Click to Show crazepony 4pcs 6x15mm motor speed (8145949tqca5281) Details

Super powerful motors and great price! fast shipping a plus!

Crazepony-4pcs-6x15mm-motor-speed-(8145949tqca5281) set picture

- M. ClaraTurned my inductrix into a little monster. Big smiles from this customer.

Marginally faster than 14k. Very noisy but are working so far!

K. Angelica, Ohio

CRAZEPONY 4PCS 6X15MM MOTOR SPEED: FASTER 17500KV TW SPECIAL SAUCE EDITION BLADE INDUCTRIX TINY WHOOP MICRO JST 1.25 PLUG BONUS RUBBER RINGS Featured
Brand :    crazepony
Size :    Small
  • Weight: about 1. 8g, quantity: 4 pcs (2 cw and 2 ccw)
  • Motor diameter: 6mm, motor length: 15mm, with 1. 25mm jst plug
  • Special sauce edition 17500kv 3. 7v / 65, 000 rpm
  • Work for blade inductrix, tiny whoop, nano qx etc.
  • Bonus rubber rings
Price :    $8.99
Model :    8145949TQCA5281
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Hobbies (crazepony product review) for Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Bonus Rubber Rings available as-of ( Mar 2021 )

Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - Blade Inductrix/FPV

This little thing works far better than i expected. The inductrix flies really well right out of the box but this makes a noticeable difference in precision and stability.

1. Description: - support frame stiffening and simple installation without any glue or fastening. - material: 3k pure carbon fiber. - weight: 0. 59(g) 0. 02(oz). - use for stock or cnc kit (6mm motor) - blade inductrix/fpv. 2. Package included: 1 x rakonheli cnc 3k pure carbon fiber stiffener.

Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - Blade Inductrix/FPVRakonheli-Carbon-Fiber-Stiffener-Motor

Rakonheli Carbon Fiber Stiffener Motor (idtx483 cf) FAQ.

I love my blade inductrix, and its been a really sturdy little thing, but before i got this frame stiffener, i broke, during crashes, three of the struts that hold the motors onto the inductrix's frame. (go e600 glue! ) since i bought this frame stiffener and added it to my inductrix, i haven't broken a single strut or anything else on the inductrix! (and that's despit crashing it hard more than a few times. ) this is a "must have" product, in my view. Best $5 i have ever spent. . It does, over time have a tendency to slip down the motors it is attached to, but that's easily fixed by just checking the level and state of the stiffener on the frame before you start flying or when you change batteries. -Notice from W. Widmer, Saarland

Click to Show rakonheli carbon fiber stiffener motor (idtx483 cf) Details

Using this thing on my tiny whoop with the stock inductrix frame. So far i have crashed maybe 100 times some kinda hard and no broken mother mounts on the inductrix standard frame. I replaced the frame when i upgraded to this carbon fiber stiffener. Before that i had just the stock frame and it had 5 of the 12 motor mounts broken, so without this part plan on ordering lots of frames. I have used super glue to try and prepare the frame an it is pointless, just brakes again. I bought the "welder" brand glue if this frame has issues but so far it is doing great. Defiantly need this and it is very little weight.

Rakonheli-carbon-fiber-stiffener-motor-(idtx483-cf) set picture

- F. AngelicaWorks like a dang charm easy to put on and doesn't interfere with the battery

Fit on my jjrc h36 (or eachine e010) perfect with a little elbow grease. Trick i used was to install the brace with the motors out and then slide them forcefully in. Frame is super solid now, sexy as ever, and no issues after crashes. Tiny bit of battery lose but won't notice it after battery modded. Buy it!

L. Mary, Reading

RAKONHELI CNC 3K PURE CARBON FIBER STIFFENER 6MM MOTOR - BLADE INDUCTRIX/FPV Featured
Brand :    rakon
Model :    IDTX483-CF
Order click here :    normally ships in 24 hours
  • Rakon
  • Idtx483-cf
Price :    $4.99
Toy :    Best Toys And Games (rakon product review) for Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - Blade Inductrix/FPV available as-of ( Mar 2021 )

Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Rubber Rings

Yup, you can really tell the difference between these and the 17500kv motors. Or the "black" edition motors i bought from newbee. They work far better than expected and at half the price! awesome, can't say enough good things. What i do is connect all the motors to the board while the board is not on the frame, then i do one whole 3360 degree twist of the fc and it pulls all the motor wires close together for a nice, tight clean build and you dont have to fiddle with the rubber bands on the motors.

Description: motor diameter: 6mm motor length: 15mm shaft diameter: 0. 8mm cable length: 56mm weight: 1. 8g each no load speed: 70000 15% rpm rated load speed: 40500 15% rpm motor wire: clockwise motor(with red blue), anti-clockwise motor(with black white) option: with 1. 25mm jst plug quantity: 4 pcs (2 cw and 2 ccw) work for blade inductrix, tiny whoop, nano qx etc bonus rubber rings package including 2 * cw motor 2 * ccw motor

Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Rubber RingsCrazepony-4pcs-6x15mm-Motor-Speed

Crazepony 4pcs 6x15mm Motor Speed (43234 1372) FAQ.

These motors are super. They give my whoop exceptional punch and help carry my fpv cam/vtx as if it were not onboard. After experimenting with prop configurations, i find cutting down 4 blades to 2 blades works most efficient with plenty power on tap. Better than 3 bladed for me. Crazepony customer service is amazing as i had a slight issue with my order but they quickly resolved it. Will continue to make them my first choice for whoop related items. -Notice from O. Wells, Suffolk

Click to Show crazepony 4pcs 6x15mm motor speed (43234 1372) Details

I installed these motors as a replacement motors for my inductrix fpv pro which are supposed to be 19600 kv or at least i thought. When i looked for the original motors online, they were $40. 00. Obviously did not get them and instead got these at a great price. These are 19000kv but after break in, are more powerful than the original motors on the inductrix fpv pro. I love this motors but would like to see a higher kv version for a betaflight configurable board like the one on the pro where the throttle curve is fully configurable and it will do wonders!

Crazepony-4pcs-6x15mm-motor-speed-(43234-1372) set picture

- K. CarolynCame quickly. A quick repair for my inductrix. The motors come with color coded wires for the ones that spin clockwise and the ones that spin counter-clockwise. You need to google what's all about as these come with no instructions.

All 4 motors arrived in a bag with 8 rubber bands. After installation, i fired up my eachine tiny whoop and noticed a dramatic difference right off the bat. In addition to noticeably increased power and lift, the overall flight response from my quad was much smoother and precise. . Additionally, the increase in power has reduced my quad getting up in its own wash and uncontrollably descending from it (unless of course you're already descending at an unrecoverable rate at a mainly horizontal position relative to the ground). . In my mind, there's no reason why you shouldn't buy these and upgrade.

B. Anonymous, Northamptonshire

CRAZEPONY 4PCS 6X15MM MOTOR SPEED: INSANE 19000KV BLADE INDUCTRIX TINY WHOOP MICRO JST 1.25 PLUG RUBBER RINGS Review
Brand :    crazepony
Size :    Small
Weight :    0.4 pounds
Model :    43234-1372
Quantity :    1
Order click here :    normally ships in 24 hours
  • Speed: insane, 19000kv / 70000 rpm
  • Motor diameter: 6mm, motor length: 15mm, cable length: 56mm
  • Insane for blade inductrix, tiny whoop, nano qx etc
  • With 1. 25mm jst plug, perfect for inductrix fc
  • Weight: 1. 8g each , quantity: 4 pcs (2 cw and 2 ccw)
Price :    $9.99 (was $19.99)
Home :    Best Home (crazepony product review) for Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Rubber Rings available as-of ( Mar 2021 )

Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop Crazepony FPV Micro AIO Camera

3pcs f04 fpv camera vacuum plastic mount tiny whoop for crazepony fpv micro aio camera description: this is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops. It is still low enough to look down between the ducts to drop thru small slots or gaps. This is a camera/vtx mount for the f04 fpv camera. With very light weighs in at 1. 2g. Small size: 4. 7 * 4. 0 * 1. 5 cm. Holds the camera securely and eliminates the chance of tearing a smd component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation. - package including 3 * f04 fpv camera vacuum plastic mount

Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop Crazepony FPV Micro AIO CameraCrazepony-Camera-Vacuum-Plastic-Mount

CRAZEPONY 3PCS F04 FPV CAMERA VACUUM PLASTIC MOUNT TINY WHOOP CRAZEPONY FPV MICRO AIO CAMERA Spotlight
Brand :    crazepony
Color :    As Shown
Size :    3pcs Camera Mount
Weight :    0.1 pounds
Model :    COMINU053704
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Hobbies (crazepony product review) for Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop Crazepony FPV Micro AIO Camera available as-of ( Mar 2021 )
Price :    $6.99
  • This is a camera/vtx mount for the f04 fpv camera. with very light weighs in at 1. 2g. small size: 4. 7 * 4. 0 * 1. 5 cm.
  • This canopy is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops.
  • It is still low enough to look down between the ducts to drop thru small slots or gaps.
  • All stock hardware is used, super simple installation.
  • Holds the camera securely and eliminates the chance of tearing a smd component of the board with aggressive double sided tapes.

Blade Main Frame: Inductrix

Blade main frame: inductrix, blh8706

Blade Main Frame: InductrixBlade-BLH8706-Main-Frame-Inductrix

BLADE MAIN FRAME: INDUCTRIX Pros
Brand :    blade
Color :    White
Weight :    0.1 pounds
Model :    BLH8706
Quantity :    1
Order click here :    normally ships in 24 hours
Hobby :    Best Toys And Games (blade product review) for Blade Main Frame: Inductrix available as-of ( Mar 2021 )

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter Y Splitter FPV Drone like Blade Inductrix etc

Specification output power: 25mw supply voltage: 2. 9-5. 5v size : 47 * 14. 8 * 12. 5 mm weight: 3. 6g antenna exclusive dipole whip antenna power consumption: 200 215ma5v dcin frequency: 5. 8ghz 5 bands 48 channels, with raceband: 5362 5945mhz field of view: 120 degrees viewing angle operating temperature: -10 +60 ambient temperature: 25 channel sel:touch switch channel indicate:ch1 ch8 channel indication with 8leds and a f frequency, group indicate with 6leds modulation type fm transmit power: 13 1dbm; frequency control: pll all harmonic: max -50dbm frequency stability: 100khz (typ. ) frequency precision: 200khz (typ. ) channel carrier error: 1db antenna port: 50 Ω sensor:pal: 720x540/ntsc:640x480 1/4" lens angel: h:120 /v:100 base-band interface: (p1. 27*2) profile dimension: 14. 5mm*12. 2mm+14. 5mm*12mm package including 1 * fpv micro aio camera 1 * micro jst 1. 25 to 2 pin wafer cable 1. 5cm y splitter 1 * random color camera mount

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter Y Splitter FPV Drone like Blade Inductrix etcCrazepony-Camera-Transmitter-Splitter-Inductrix

CRAZEPONY FPV MICRO AIO CAMERA 5.8G 48CH 25MW TRANSMITTER Y SPLITTER FPV DRONE LIKE BLADE INDUCTRIX ETC Review
Brand :    crazepony
Color :    Standard
Weight :    0.1 pounds
  • Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jst 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop blade inductrix .
  • Wide lens angle. miniature and light weight design
  • Supporting touch switch select channel frequency group, supporting ntsc/pal switch, support vertical inverted image switch.
  • Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm.
  • 8led display channel and 6leds display frequency group information, 1led display pal/ntsc and flip information.
Price :    $21.98 (was $22.98)
Model :    SCNEW-03032
Quantity :    1
Order click here :    normally ships in 24 hours
Photography :    Best Surveilance Systems (crazepony product review) for Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter Y Splitter FPV Drone like Blade Inductrix etc available as-of ( Mar 2021 )

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

Great add on for my charger. I'm happy with the product, wish it would have came in the 2 days. Oh well there's always next weekend to fly.

Crazepony 1s lipo battery charging board blade inductrix ultra micro jst-ph parallel connect plate specifications: input charge connector: male 4mm banana plug output connector: 6x micro jst 1. 25; 6x jst-ph 2. 0 wire type: 18 awg charge lead max charge rating: 1. 5a per battery fuse rating: 1. 5a board size: 62. 5x32x5mm weight: 17g it needs to connect to a lipo charger for charging battery suitable for battery of blade inductrix, glimpse, mcp x, nano qx 3d, nano cp x, nano qx etc *micro jst 1. 25 aka ultra micro jst, mcx, pico, molex 1. 25 etc. *jst-ph 2. 0 aka high current ultra micro, mcpx, powerwhoop etc. Package including 1 * 1s lipo battery charging board parallel plate

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPXCrazepony-Battery-Charging-Inductrix-Parallel

Crazepony Battery Charging Inductrix Parallel (I173540MK5WV281) FAQ.

In the mini drones you're going to need to use a lot of batteries because it sucks the battery down fast and this is a good board for charging multiple batteries. It's simple plug-in positive negative pop your batteries right onto the board itself and you're good to go as i said if you're flying the mini drones you're going through batteries because he only worked about 2 to 3 minutes and if you're like me you have 8 or 10 of those batteries 12 of them and you need to charge them all the time this is a great unit -Notice from Z. Allen, Alabama

Click to Show crazepony battery charging inductrix parallel (i173540mk5wv281) Details

This is a great product. I gave it 4 stars as it doesn't come with any instructions. For example if you have more than one bat plugged in you can increase the charging current. This would have been good to know.

Crazepony-battery-charging-inductrix-parallel-(i173540mk5wv281) set picture

- K. JudithGreat accessory and i can now charge 6 mini whoop batteries at once in under 10 minutes and have half hour uninterrupted fly time between charges!

When i started fpv flying with my fx797t whoop cam i needed something to charge the micro batteries that i used to power it with. I found this and decided to give it a try and it has served me well. I used this parallel board with my skyrc imax b6 ac v2 balance charger and it works like a charm. Just plug the leads into the appropriate ports and put the same size batteries on the board. . I have two 180mah pico batteries so i set my charge rate to around . 3a or . 4a and let them charge up. Basically to parallel charge you simply add your mah together and then divide that by 1000 and that will give your 1c charge rating or another way that i like to look at it is after you add them all together at the end of your number is a decimal, move that decimal 3 places to the left and that will also give you your 1c charge rating. Like 180mah+180mah 360mah so that would be 360. And move that decimal 3 places left and you have . 360 so you will ideally want o charge at . 3a or . 4a, either one should work fine. Hope that makes sense . . My only complaint is the board i received was a little sloppy looking but that doesn't away from the performance, it just would have been a little nicer for the board to look more like the one pictured with everything lined up straight and nice. Besides that i love it and it serves its purpose!

C. Anonymous, Windsor and Maidenhead

CRAZEPONY 1S LIPO BATTERY CHARGING BOARD BLADE INDUCTRIX ULTRA MICRO JST-PH PARALLEL CONNECT PLATE MCX MCPX Highlight
Brand :    crazepony
Size :    Small
Weight :    0.4 pounds
Model :    I173540MK5WV281
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Toys And Games (crazepony product review) for Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX available as-of ( Mar 2021 )
Price :    $7.48 (was $12.99)
  • Output connector: 6x micro jst 1. 25; 6x jst-ph 2. 0
  • Input charge connector: male 4mm banana plug, it needs to connect to lipo charger for charging battery
  • Charge 6 batteries at the same time, keep your tiny whoop staying in the air
  • Suitable for battery of blade inductrix, glimpse, mcp x, nano qx 3d, nano cp x, nano qx etc
  • Board size: 62. 5x32x5mm, weight: 17g (0. 6ounces)

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

Batteries came with good packaging. They fit the stock tiny whoop frame just fine but the upgraded frames (with the foam piece) are a bit tight. One battery came damaged but customer support was very quick in resolving the issue with me.

4pcs 230mah hv 1s lipo battery 30c 3. 8v for tiny whoop blade inductrix jst-ph 2. 0 connector features: item: hv 1s crazepony lipo battery rate: 30c dimension: 54mm * 12. 5mm * 6mm weight: 6. 3g/per unit capacity: 230mah in standard voltage, 250mah in high voltage the connector plug: jst-ph 2. 0 aka high current ultra micro, powerwhoop, mcpx this battery is lighter than the usual 230mah battery, and can be charged to either standard voltage (4. 2v, 230mah) or high voltage (4. 35v, 250ish mah). This is newly developed chemistry for a longer lifetime and safer charging situation. This battery will give you higher rpms (more power) and a considerably longer flight time. High density with great safety fits tiny whoop - package including 4 * 230mah hv 1s lipo battery 30c 3. 8v jst-ph 2. 0 connector

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V Tiny Whoop Blade Inductrix JST-PH 2.0 ConnectorCrazepony-230mAh-Battery-Inductrix-Connector

Crazepony 230mah Battery Inductrix Connector (2143529fkrb6281) FAQ.

If you have a "tiny whoop" or anything of similar size, this is the absolute first upgrade you should make. The battery connector is such a bottleneck, and this fixes that while providing a light enough battery with enough c rating to see a huge difference. Flight times around the same as my 600mah blue pill battery, but the flights are snappier and i spend less time bouncing off the ground due to weight/battery sag. Will buy more! -Notice from N. Meyer, Georgia

Click to Show crazepony 230mah battery inductrix connector (2143529fkrb6281) Details

So far my tiny whoop rebuild has seen flight times increase to 5:10 (mild flying and hovering) to 4:52 (aggressive speed runs with 180 turn around at each end). *note these can still be used as standard 1s lipo batteries if you don't have an hi voltage setting on your charger. I do wish the pigtail was just a few mm longer as it uses thicker cable which is slightly less flexible than the stock wire (which makes for a tighter time bending/connecting the battery and limits the distance you can extend the battery as a counter weight to the camera (if running a tiny whoop). I initially wanted to route mine from the top, but it came up short and couldn't connect the battery so i had to re-soldier to the bottom of the fc (original location). I've attached a couple of pics for reference.

Crazepony-230mah-battery-inductrix-connector-(2143529fkrb6281) set picture

- R. HannahGot these batteries as a recommendation from a friend and so far not so great, i purchased 8 batteries because you can never go wrong with having extras and charged and flew about 4 times and 3 out of the 8 batteries are puffing and 2 look like they are on the way to puff out so now i'm down to 3 batteries left in which i can use. Batteries are great when used and charged properly with an lihv charger. But sad to see these batteries puff in such short time. And for the price, i'd expect a little better then some international batteries. . Edit - 5/2/17 after writing the review i was contacted by crazypony and they insured me that they will fix the problem and they stand by there word. They quickly sent me a new batch of batteries after writing this review. I must say that products, especially lipos have issues sometimes but great customer service is hard to find. Just because of the level of great service, i will be doing business with crazypony again and again.

Great batteries! these are my first 2. 0 connector batteries! . . And i must say it's an incredible difference, and i recommend everyone switching over! . . Only complaint ia that the pins on the 2. 0 connector came out very easy. . Simple fix. Dab of hot glue! . . Thanks for the awesome lipos!

I. Shayna, Wakefield

CRAZEPONY 4PCS 230MAH HV 1S LIPO BATTERY 30C 3.8V TINY WHOOP BLADE INDUCTRIX JST-PH 2.0 CONNECTOR Reviews
Brand :    crazepony
Color :    230mah 2.0
Size :    small
Weight :    0.4 pounds
Model :    2143529FKRB6281
Quantity :    1
Order click here :    normally ships in 24 hours
  • Tiny whoop blade inductrix future choice of battery
  • Dimension: 54mm * 12. 5mm * 6mm, weight: 6. 3g/per unit
  • Capacity: standard voltage (4. 2v, 230mah)or high voltage (4. 35v, 250ish mah)
  • Newly developed chemistry hv 1s battery, high voltage gets longer lifetime and safer charging situation
  • The connector plug: jst-ph2. 0 aka high current ultra micro, powerwhoop , mcpx
Price :    $13.99
Toy :    Best Toys And Games (crazepony product review) for Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V Tiny Whoop Blade Inductrix JST-PH 2.0 Connector available as-of ( Mar 2021 )

Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector FX798T FPV Micro AIO Camera

Easy to install, although a set of instructions would be appreciated or at least a few how to pics/illustrations.

Crazepony 4pcs tiny whoop fpv dipole whip antenna 5. 8g 35mm omnidirectional weld connector for fx798t fpv micro aio camera description: electrical characteristics : 5. 8g receiver an omnidirectional high sensitivity antenna built-in the transmitter gain antenna. Frequency: 4900-5900mhz swr: 2. 0 retrun loss: -10db antenna gain: 1. 5 0. 3dbi polarization : linear impedance :50 ohm material of radiator : cumarerial of plastic cable type: od 1. 13mm operation temperature : -10 to +180 storage temperature : -10 to +180 connector: weld wire : rf113(balck) length : 35mm package including 4 * 5. 8g fx798t fpv brass antenna

Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector FX798T FPV Micro AIO CameraCrazepony-FX798T-Antenna-Omnidirectional-Connector

Crazepony Fx798t Antenna Omnidirectional Connector (Hobbies) FAQ.

Great reception weather your left or right polarized on your ground stattion -Notice from F. Courtney, Connecticut

Click to Show crazepony fx798t antenna omnidirectional connector (hobbies) Details

Great linear antenna replacements. These are much more durable than your circular polarized micro antennas with good range and signal.

Crazepony-fx798t-antenna-omnidirectional-connector-(hobbies) set picture

- T. HurstWell made was easy to install with average solder iron. 4 stars only cuz price seems high for only four antennas. Bit that could just be me.

Durable and exactly what i wanted! these antennas are perfect for the small fx798 style cameras as a replacement to the circular polarized ones that always break.

N. Erickson, Brent

CRAZEPONY 4PCS 5.8G FX798T FPV BRASS ANTENNA 35MM OMNIDIRECTIONAL WELD CONNECTOR FX798T FPV MICRO AIO CAMERA Pros
Brand :    crazepony
Color :    Black
Size :    4pcs Brass Antenna
Model :    5QC183452TC8QN388
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Hobbies (crazepony product review) for Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector FX798T FPV Micro AIO Camera available as-of ( Mar 2021 )
Price :    $6.56 (was $22.79)
  • 5. 8g fpv dipole whip antenna is designed for fx798t aio camera , eachine ef-01 fpv micro aio camera , crazepomy 25mw tiny whoop camera
  • Retrun loss: -10db. antenna gain: 1. 5 0. 3dbi
  • An omnidirectional high sensitivity antenna built-in the transmitter gain antenna.
  • Polarization : linear. impedance :50 ohm
  • Frequency: 4900-5900mhzv. swr: 2. 0

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop Quadcopter Camera

I really like these camera holders. The only reason it's 4 star is because i had to flex it a bit to align with the screw holes. These do not come with hardware. I was lucky to have some lying around.

3pcs inductrix fpv camera mount tiny whoop for quadcopter camera summary: this is a camera/vtx mount for the blade inductrix. Only fit for fx798t fx797t mc-01 camera. Weighs in at 2 3g. Holds the camera securely and eliminates the chance of tearing a smd component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation. Just remove the front, and 2 side flight controller screws, press them into the mount, and reassemble. Slip the cameras power wires through the hole in the mount, and seat the camera in the mount. Solder your power wires to the battery input pads and your ready to fly. Print settings: print: 3d type rafts: no supports: no infill: 100% size(l*w*h): 4 * 2. 2 * 1. 3 cm package including 1 * fpv camera mount(black) 1 * fpv camera mount(white) 1 * fpv camera mount(orange)

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop Quadcopter CameraCrazepony-Camera-Mount-Inductrix-Quadcopter

Crazepony 3pcs Fpv Camera Mount Inductrix Tiny Whoop Quadcopter Camera (rgw175711kfscm388) FAQ.

Very easy to use and holds the camera tightly in place, i recommend this product if you want to fpv your tiny whoop ! -Notice from L. Sarah, Nord-Pas-de-Calais

Click to Show crazepony 3pcs fpv camera mount inductrix tiny whoop quadcopter camera (rgw175711kfscm388) Details

Great product! had to carve out a little for tx 02 led display. Wish it came with those little panhead m2 screws!

Crazepony-3pcs-fpv-camera-mount-inductrix-tiny-whoop-quadcopter-camera-(rgw175711kfscm388) set picture

- Z. MeredithThese are very light but they are too expensive for the quality; there was a separation between the back support and the base on the white one. It was easily repaired with model glue (or ca glue). I have an ef-01 but it was easily modified to fit that particular vtx combo. Overall, the design is incredibly accurate in relation to an inductrix control pcb.

Very good mount

Q. Erickson, Basse-Normandie

CRAZEPONY 3PCS FPV CAMERA MOUNT INDUCTRIX TINY WHOOP QUADCOPTER CAMERA Advantages
Brand :    crazepony
Size :    Tiny Whoop Camera Mount
Weight :    0.1 pounds
Model :    RGW175711KFSCM388
Quantity :    1
Order click here :    normally ships in 24 hours
  • Weighs in at 23g. holds the camera securely and eliminates the chance of tearing a smd component of the board with aggressive double sided tapes.
  • This is a camera/vtx mount for the blade inductrix. only fit for fx798t fx797t mc-01 camera.
  • 20 degree mount works well with the 1. 8 lense on these cameras.
  • All stock hardware is used, super simple installation. just remove the front, and 2 side flight controller screws, press them into the mount, and reassemble.
Price :    $8.99
Toy :    Best Hobbies (crazepony product review) for Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop Quadcopter Camera available as-of ( Mar 2021 )

beebrain v.1 - cleanflight/betaflight compatible flight controller for the tiny whoop - dsmx spektrum Price : 0, was : 0 as 2018-11-09
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Beebrain V 1 Cleanflight Betaflight Compatible (Newbeedrone) Reviewed by on wujus.com

Top beebrain v 1 cleanflight betaflight compatible (newbeedrone) Content

The F.A.Q. for beebrain v.1 - cleanflight/betaflight compatible flight controller for the tiny whoop - dsmx spektrum

Well this was not the bind and fly i thought it was. I have a spektrum controller that is supposed to bind to it and easy to program. Well i was mistaken, there are so many variations of how to set it up and some of them are not correct. After working with it for about a week i finally got my whoop in the air. As i am still having a little trouble with the punch out power, it is really great, the acro mode is sick. Very responsive and fast as you can make it that is for sure. If you are looking for having a great stable and fast whoop. I would recommend it. I am going to be doing video reviews from my company website. More info on that later. But its a good flight controller.

A number of questions have been asked here.

Q&A

(0) Question: Will this work on a furibee f36 and does it work with the original controller?


(1) Question: What's the highest rated battery i can use on this?


(2) Question: Will it for the jjrc h36?


(3) Question: What do you have to do in clean flight?


(4) Question: Does it come with mounting hardware?


(5) Question: Is the battery connecter a jst 1. 25 connecter


(6) Question: Will this bind to my spektrum dxe? is any soldering required to complete the build?


(7) Question: Sorry if its a stupid question, but will it bind to my blade mlp4dsm?


(8) Question: Graduated from a h36 to a inductrix fvp rtf, how intimidated should i be trying to set up in beta flight?



(note) Question: where/how to get Newbeedrone (manufacturer's brand) accessories & similiar Newbeedrone's products

Answer:

https://wujus.com/beebrain-v-1-cleanflight-betaflight-compatible-57421m6bl7p4/

Click the marked text to copy link to Clipboard


Hobbies 110927672, Remote & App Controlled Vehicles & Parts 1100385296, Remote & App Controlled Vehicles 110385661, Toys & Games 110397561Top Beebrain V 1 Cleanflight Betaflight Compatible (Newbeedrone) FAQ Content

Best beebrain v 1 cleanflight betaflight compatible (newbeedrone) in review

It was a little difficult to get going with my dx6i but that was probably me. I love the stability and control this board gives me. A must have if you want to have a competitive whoop or acro whoop.

T. Gloria, Northwest Territries

You might like to see Black Series At-at "kids And Fans Alike Can Re-create The Biggest Battles And Missions In The Star Wars Saga Figures From The Black Series! Exquisite Features And Decoration, This Series Embodies The -Star Wars Black Series At-at Pilot
  1. Items: Multiple Points Of Articulation.
  2. Items: Expand And Enhance Star Wars Collections.
Modest Star Wars Black Series At-at Pilot (Toys And Games) B9804 Star Wars Black Series At-at Pilot
Or you might like to consider Maxie Teddy Bear Stuffed Animal Plush, Beige, Gund Is Proud To Present Maxie A Cute And Classic Beige Teddy Now Available In A Larger 24 Size For Added Play Value. Soft Rose-swirl Plush Provides A Dash Of Luxury Detail, While Other-professional-frames-Gund Maxie Teddy Bear Stuffed Animal Plush, Beige, 24
  1. Details: Soft, Huggable Plush Built To Famous Gund Quality Standards.
  2. Details: Surface-washable.
Reasonable Gund Maxie Teddy Bear Stuffed Animal Plush, Beige, 24 (Toys And Games) 4043803 Gund Maxie Teddy Bear Stuffed Animal Plush, Beige, 24

Z. Debra, North Somerset says

High quality parts and fast shipping very pleased with item

V. Cageen, Middlesbrough

Been flying with this board almost daily and has been great! i picked up the dxsm version but kind of wish i went for the frsky version now that i have a taranis. I did get the orange module for a taranis it does work, tested it myself and thats how i have been flying. Keep an eye on your flight time and battery charge after flying. This does not have a low voltage cut off like the stock inductrix board and you can kill your batteries by over draining them. I use the 250 mah 35c crazypony batteries and get about a 2 min flight time with the fastest motors i could find.

Q. Zelda, New South Wales says

Comes with good default settings from the factory and gives you full tunability over your tiny whoop.



Leave a Reply

You must be logged in to post a comment.


Top beebrain cleanflightbetaflight Review Content

Related Products

Product Image Gallery

Top-beebrain-v-1-cleanflight-betaflight-compatible-57421m6bl7p4-Content