Foreword
This is a great deal if you're starting out the rc hobby because you get a great basic charger along with the power supply so you don't have to run around trying to figure out what power supply works best. Also, the memory feature saves time when you are on the track. The Best Combo Special: Tenergy TB6-B Balance Charger for NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply as-of ( Apr 2020 ) | Tenergy-Toys And Games Review Feature Combo Special: Tenergy TB6-B Balance Charger for NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply Supports multiple types of battery packs with one single charger! handle nimh, nicd, li-po, li-ion, li-fe, sla batteries. Various connectors supported:hitech, jst, deans, tamiya, mini tamiya. Balance individual cells on discharge. Battery 'fast' and 'storage' mode: you can charge li-ion/li-polymer battery for special purposes.. For users convenience it can store maximum 5 data of different batteries. .
Combo Special: Tenergy TB6-B Balance Charger for NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply Review (90263)
I like it - however, it is a bit complicated to use and the instruction manual (written in halting english) is not very comprehensive. So if you buy this i strongly recommend you go on youtube and watch the videos - there are several and they are very helpful - the manual that comes with the charger, not so much. -T. Lorenz
- Rank
- Toy
- Brand
- Tenergy
- EAN
- 0844949022187
- HazardousMaterialType
- Unknown
- Product Dimensions
Height: 6.70 inches Length: 9.50 inches Width: 9.30 inches - Manufacturer
- Tenergy
- Suggested Min-Age
- 168
- Model
- 90263
- MPN
- 90263
- Quantity
- 1
- Part/Serial Number
- 90263
- Group-Order
- Toy
- Category
- TOYS AND GAMES
- Product-Name
- Combo Special: Tenergy TB6-B Balance Charger For NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply
- UPC
- 844949022187
Toy(844949022187:Toys And Games), Combo Special Tenergy Balance Charger (0844949022187:Tenergy), * nimh/nicd 1 15 cells ( 1. 2v to 18v) * li-po/lithium ion 1 6 series ( 3. 7v to 22. 2v) * li-fe 1 6 series * sealed lead acid (sla) * charge your nimh/nicd receiver packs: 3. 6v, 4. 8v, 6v, or 9. 6v * charge your life packs: 6. 6v * charge your normal nimh/nicd packs: 7. 2v, 8. 4v, 9. 6v, 10. 8v, 12v * charge your high performance lipo packs: 7. 4v, 11. 1v, 14. 8v, 18. 5v * charge your airsoft nimh/nicd packs: 8. 4v, 9. 6v, 12v * charge your airsoft lipo/life packs future proof yourself for any new battery pack or upgrades, instead of having constantly buy 1 charger for each type of pack. note: to charge mini airsoft packs, you need a standard tamiya to mini tamiya connector which is sold separately. charger specifications: dc 11v 15v, which can be directly connect to automobile battery. the working electric current is less than 5a when it is charged in full load. the current of the fuse is 10a which could prevent short circuit. you can also select a extra wall plug ac-dc12v/5a switching power as a power source. specification operating voltage dc 11 18 volts ac 100 240v, 50/60hz charge/discharge power max. 50/5 watts pb 2 20v charge current 0. 1 to 5. 0a discharg current 0. 1 to 1. 0a no. of cycle 1 to 5 times dimension 130x85x33 mm user's setting-up parameters battery voltage type liio:3. 6v, lipo:3. 7v, life:3. 3v nicd delta-peak voltage sensitivity 1 to 20mv nimh delta-peak voltage sensitivity 1 to 20mv battery temperature cut-off 20 to 80c or off waiting time between charge/discharge 1 to 60 min. integral timer limit for safety 10 to 720 min. or off maximum charging capacity limit for safety 10 to 9990mah or off key beep and buzzer sound on/off input dc power low alert 10 to 11v please do not use this charger with any pack that doesn't have a built-in protection circuit board/module (pcb/pcm).
Combo Special Tenergy Balance Charger Toy
Combo Special: Tenergy TB6-B Balance Charger for NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply (Switch to Mobile/Desktop Version)
Works quite well! . . It's smaller than i expected. The directions are absolutely horrendous, but there's a video on youtube that explains the basic steps, and once i saw that, the rest made sense. I absolutely love this charger. It comes with a several popular connectors, plus an extra set of leads for adding your own. Now i can charge everything i own. . I've has this for a few days and have used to:. Charge nimh (6 cell packs and my transmitter). Discharge nimh (6 cell pack). Balance charge lipo (2s and 3s). Discharge for storage lipo (3s). . As long as you're willing to figure out the somewhat unintuitive interface, this is a great buy.
Combo Special Tenergy Balance Charger (Toys And Games) 90263Click to see Notice
Combo Special Tenergy Balance Charger (90263)"Works well for my 250 quad, however doesn't come with an xt60 connector. The balance port plastic also came out and is actually easier to use with just the bare prongs (but now i have to remember which way to flip the battery balance charger). I only have a cheap poor quality free charger to compare to so i can't give a great comparison. The menu is easy to use however and the voltage seems to match my voltmeter. This also doesn't seem to get hot at all like some chargers i've read about. The battery also does not get hot."Action & Toy Figures » Die-Cast & Toy Vehicles » Games » Novelty & Gag Toys » Puzzles » Executive Desk Toys » Combo Special Tenergy Balance Charger (Toys And Games) 90263
Floureon 2 Packs RC Lipo Battery Monitor Alarm Tester Checker Low Voltage Buzzer Alarm LED Indicator 1-8S Lipo LiFe LiMn Li-ion Battery
Features: 1. Test the working state of lithium battery. Protect the battery from overcharging or overdischarging. 2. Compatible for 1-8s lipo/ li-ion/ limn/ li-fe battery. The pin space is about 3mm (0. 12inch). Straight pin. Specification: dimension: 4. 0 x 2. 3 x 1. 1cm (1. 6 x 0. 9 x 0. 4inch) package weight: 15g (0. 5oz) voltage detection precision: 0. 01v unit voltage display range: 0. 5v-4. 5v total voltage display range: 0. 5v-36v 1s test mode voltage range: 3. 7v-30v low voltage alarm mode: 2-8s alarm set value range: off-2. 7v-3. 8v package included: 2x voltage buzzer alarm notice: when the voltage lower than the set value, it will buzzer with red led light. Pre-set value is 3. 3v. Push key can change the voltage setting and save.
Floureon-Battery-Monitor-Checker-Indicator
| FLOUREON 2 PACKS RC LIPO BATTERY MONITOR ALARM TESTER CHECKER LOW VOLTAGE BUZZER ALARM LED INDICATOR 1-8S LIPO LIFE LIMN LI-ION BATTERY Pros | |
|---|---|
| Brand : | floureon |
| Color : | black |
| |
| Model : | 150117-F2 |
| Order click here : | normally ships in 24 hours |
| Home Improvement : | Best Security Electronics (floureon product review) for Floureon 2 Packs RC Lipo Battery Monitor Alarm Tester Checker Low Voltage Buzzer Alarm LED Indicator 1-8S Lipo LiFe LiMn Li-ion Battery available as-of ( Apr 2020 ) |
XT60 Drone Connectors 5 Pairs 5 Male 5 Female
Quick pro tip. When soldering these, keep the male and female connectors plugged into eachother, this will keep the pins of the male connector straight, even if the plastic gets a little soft while you are soldering. Doing this also provides more plug to hold onto or secure with helping hands.
Made from high-temp nylon and gold plated bullet connectors, both included in the injection mold at the time when forming the connector. The xt60 ensures a solid high-amp connection, perfect for applications up to and beyond 65a constant. Xt60, designed by rcx to be more reliable and a better quality connection than deans t-connectors. These are not cheap copied xt60 plugs (abs). These original nylon xt60 plugs can handle over 60a current for extended periods without exceeding 80degc thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-nylon xt60 plugs.
XT60-Drone-Connectors-Pairs-Female
See Xt60 Drone Connectors 5 Pairs 5 Male 5 Female (Rcx Xt Connectors) FAQ.
Already converted my radian glider to xt60. Now all my batteries and airplanes are xt60, so much more convenient! easy to solder. Don't forget the shrink tubing! also connected one of the male connectors to an 1157 (12v 2. 1 amp) automotive bulb to safely discharge my lipo batteries down to 11. 1 volts after flying for storage. -Notice from N. Valencia, Sutton
Click to Show xt60 drone connectors 5 pairs 5 male 5 female (rcx xt connectors) Details
Pretty good quality. They don't seem to be quite as high quality as the official ones that come pre-soldered to batteries, their a little stiffer and duller in color. But that is not necessarily a bad thing, they mate well and i haven't had a single problem so far. I'm assuming the stiffness/color difference is because they use nylon which should give better heat characteristics anyway. They held up pretty well to soldering, i wasn't particularly careful and didn't get any melting or deformation at all. . Would definitely recommend due to their low price.
- J. OlgaConnectors seem to be good quality, but they only hold together by friction and not any indent so they will come apart without much effort. Just driving my truck wouldn't make them come apart.
These are good quality connectors. I use them on my fpv racer, camera drone, and other electrical projects that need to handle high current. Easily connect and disconnect, handle repeated soldering and desoldering, and don't crack easily.
L. Ruff, Massachusetts
| XT60 DRONE CONNECTORS 5 PAIRS 5 MALE 5 FEMALE Summary | |
|---|---|
| Brand : | rcx xt connectors |
| Size : | XT60 |
| Weight : | 0.9 pounds |
| |
| Model : | LYSB00G197NHW-TOYS |
| Quantity : | 1 |
| Order click here : | normally ships in 1-2 business days |
| Toy : | Best Toys And Games (rcx xt connectors product review) for XT60 Drone Connectors 5 Pairs 5 Male 5 Female available as-of ( Apr 2020 ) |
Lipo Battery Low Voltage Tester Checker 1S-8S Buzzer Alarm LED Indicator
This product is suitable for various kinds of rc battery, when the voltage is below the set value, it will buzzer with red led light, pre-set value 3. 3v. Push the key which can change the voltage setting and save. Features: sharp backlit lcd screen, applicable under poor light condition compact and extremely portable suitable for various kinds of rc battery, such as lipo/li-ion/li-mn/li-fe battery easy to install specification: weight: 14g dimension: 40 * 25 * 11mm display: led voltage detection precision: 0. 01v unit voltage display range:0. 5-4. 5v total voltage display range:0. 6-36v 1s test mode voltage range: 3. 7-30v low voltage alarm mode for:1-8s alarm set value range: off-2. 7-3. 8v package includes: 1x lipo battery voltage tester(the battery cable do not included)
Battery-Voltage-Tester-Checker-Indicator
| LIPO BATTERY LOW VOLTAGE TESTER CHECKER 1S-8S BUZZER ALARM LED INDICATOR Featured | |
|---|---|
| Brand : | integy |
| Size : | Size2 |
| Model : | LE4987 |
| Order click here : | normally ships in 24 hours |
| Home Improvement : | Best Tools (integy product review) for Lipo Battery Low Voltage Tester Checker 1S-8S Buzzer Alarm LED Indicator available as-of ( Apr 2020 ) |
| |
Jrelecs Xt60 Charging Cable Banana Plugs DJI Phantom Battery 2pcs
Got these to charge my turnigy 3s lipo with my tenergy charger that included everything but xt60. Worked like a charm.
Specifications: input connector: male 4mm banana plug output connector: female xt60 (with male bullets) length: 15cm package size: 5 * 2 * 1cm / 2 * 0. 8 * 0. 4in weight: 20g package list: 2 * xt60 to 4. 0 banana plug rc battery charge cable
Jrelecs -Charging-Banana-Phantom-Battery
See Jrelecs Xt60 Charging Cable Banana Plugs Dji Phantom Battery 2pcs (JR-AP22) FAQ.
A must have to charge my lipo batteries for my quad copter b6ac charger. They seem to be well built and a quality product. -Notice from M. Connie, Washington
Click to Show jrelecs xt60 charging cable banana plugs dji phantom battery 2pcs (jr-ap22) Details
Works perfectly with lipo batteries and alligator clips to power my bread board.
- Z. AlbaHeavy cables, good solder joints, good heat shrink. These work perfectly. One for my charger and the other was sacrificed to become the replacement cord on my quad after a really really nasty crash.
Great for using as a charger extension as it seems like the wires on lipo batteries are shorter nowadays. Also found some matching battery cell extensions which give me the length to put the batteries inside of fireproof bag while charging.
E. Valdez, Wigan
| JRELECS XT60 CHARGING CABLE BANANA PLUGS DJI PHANTOM BATTERY 2PCS Pros | |
|---|---|
| Brand : | jrelecs |
| Color : | Black+ red |
| Weight : | 0.2 pounds |
| Model : | JR-AP22 |
| Quantity : | 5 |
| Order click here : | normally ships in 24 hours |
| |
| Toy : | Best Hobbies (jrelecs product review) for Jrelecs Xt60 Charging Cable Banana Plugs DJI Phantom Battery 2pcs available as-of ( Apr 2020 ) |
Gens ace LiPo Battery Pack 5000mAh 50C 2S 7.4V HardCase 21 Deans T Plug RC Car Boat Truck Roar Approved
Product details 1. Brand: gens ace. 2. Capacity (mah): 5000 mah. 3. Voltage (v): 7. 4v. 4. Discharge rate (c): 50 c. 5. Max burst discharge rate (c): 100c. 6. Configuration: 2s1p. 7. Net weight (dev. 20g): 304g. 8. Length (dev. 5mm): 139 mm. 9. Width (dev. 2mm): 47 mm. 10. Height (dev. 2mm): 25 mm. 11. Connector type: deans plug. 12. Wire gauge: awg12. 13. Wire length (mm): 115 mm. 14. Balancer connector type: jst-xhr. Overview: gens ace is one of the top rank rc battery brand in the market. With the effort of 200 professional engineers and technicians, gens ace always provides batteries with exquisite technology for various rc models such as rc cars, rc planes, rc heli's, rc boats, etc. Features 1. Superior japan and korea lithium polymer raw materials. 2. Automatic stacking technology, better performance. 3. Strict matching progress, excellent consistency. 4. Up to 200wh/kg energy density. 5. Long cycle life (150 times minimum). 6. Local after-sales service (located in dublin, ca). Notes 1. Shipments fulfilled by seller are shipped from dublin, ca (can only shipped within usa and canada). 2. For any questions, please feel free to contact us through "your orders" tab of your online store account, we will respond within one business day. 3. All rights reserved by gensace & tattu. 4. Designed also for hpi strada xb 1/10 rtr electric buggy, kyosho gp 4wd racing truck etc.
Gens-ace-Battery-HardCase-Approved
| GENS ACE LIPO BATTERY PACK 5000MAH 50C 2S 7.4V HARDCASE 21 DEANS T PLUG RC CAR BOAT TRUCK ROAR APPROVED Feature | |
|---|---|
| Brand : | gens ace |
| Weight : | 0.67 pounds |
| Model : | GA-B-50C-5000-2S1P-HardCase-21 |
| Quantity : | 1 |
| Order click here : | normally ships in 24 hours |
| |
| Hobby : | Best Hobbies (gens ace product review) for Gens ace LiPo Battery Pack 5000mAh 50C 2S 7.4V HardCase 21 Deans T Plug RC Car Boat Truck Roar Approved available as-of ( Apr 2020 ) |
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Great add on for my charger. I'm happy with the product, wish it would have came in the 2 days. Oh well there's always next weekend to fly.
Lipo battery charging board 1s ultra microandamp; jst-ph parallel connect plate for blade inductrix, glimpse, mcp x, nano qx 3d, nano cp x, nano qx etc specifications: input charge connector: male 4mm banana plug output connector: 6x ultra micro; 6x jst-ph wire type: 18 awg silicone charge lead max charge rating: 1. 5a per battery fuse rating: 1. 5a dimension: 100x62. 5x25mm weight: 17g built-in fuses for safe charging package including 1 * 1s lipo battery charging board
Crazepony-Battery-Charging-Inductrix-Parallel
See Crazepony Battery Charging Inductrix Parallel (I173540MK5WV281) FAQ.
I use this with my hitec 44167 x4 to charge the batteries for my nano qx in parallel. Works as expected, but you need to be aware that the batteries should be of the same exact sort and have the same remaining voltage. I use the charger to charge each battery by itself to a set voltage, then charge all in parallel once they each have matching voltages. -Notice from W. Pearson, Birmingham
Click to Show crazepony battery charging inductrix parallel (i173540mk5wv281) Details
Great accessory and i can now charge 6 mini whoop batteries at once in under 10 minutes and have half hour uninterrupted fly time between charges!
- L. DebraThis is exactly what i was looking for to charge multiple tiny whoop batteries (molex 1. 25 connectors). You can parallel charge 6 at a time. Always pay close attention when parallel charging, it is not the safest way to charge and can cause the batteries to get damaged or blow up. This is true with all parallel charging though. I haven't had issues with this yet though and many, many people parallel charge and never have problems. I would definitely recommend this to a person looking to charge multiple tiny whoop batteries at once.
Well made, works great, no problems. Make sure you receive version 2, it's connectors are stronger.
I. Irene, Georgia
| CRAZEPONY 1S LIPO BATTERY CHARGING BOARD BLADE INDUCTRIX ULTRA MICRO JST-PH PARALLEL CONNECT PLATE MCX MCPX Summary | |
|---|---|
| Brand : | crazepony |
| Size : | Small |
| Weight : | 0.4 pounds |
| |
| Model : | I173540MK5WV281 |
| Order click here : | normally ships in 1-2 business days |
| Toy : | Best Toys And Games (crazepony product review) for Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX available as-of ( Apr 2020 ) |
Teenitor Fireproof Explosionproof Lipo Battery Safe Bag Lipo Battery Guard Safe Bag Pouch Sack Charge & Storage 185x75x60mm Large size
Not really sure what i was expecting with this thing. It was sort of an impulse buy. I guess maybe i was expecting something more along the lines of one of those 8"x10" li-po sleeve envelope looking things. . Anyway, expectations aside, this thing seems to do what it was designed to do. Hold li-po batteries. It will hold six 3s 2, 200 mah dji phantom 1 batteries quite comfortably. I only have 5, but filled the remaining space with a 3s smc 2, 800 mah one. . Inside dimensions of the case are 2 1/4" high, 3" deep, and 6 3/4" wide. . Also, this thing is meant to be used in its box shape, nothing else. There's no way to have it be a sleeve type case. . As far as protecting the surroundings if it were to have a pack failure inside of it. I have no idea. If the manufacturer would be willing to send me another one of these to set off a pack inside of, i'd be more than happy to video it and share the results on here.
Features: this flame retardant bag is a convenient way of safeguarding your lipo batteries during charging, transit, and storage. It is large enough to place multiple batteries at once for safer charging and storage of batteries fireproof and explosionproof warning: never leave charging battery unattended. Always ensure the battery is on a non-flammable surface. Ensure flap is sealed while charging the lipo safe bag is intended to reduce the chances of damaged in the event of a lipo fire. Package includes: 1 x teenitor? lipo safe bag(large size) if any questions, please do not hesitate to contact teenitor and we will try our best to help you !
Teenitor-Fireproof-Explosionproof-Battery-185x75x60mm
See Teenitor Fireproof Explosionproof Battery 185x75x60mm (LP8-T) FAQ.
This bag is just the right size and shape for holding four batteries (2200 mah in my case) while they are charging on my multi-charger. -Notice from Z. Yvette, Salford
Click to Show teenitor fireproof explosionproof battery 185x75x60mm (lp8-t) Details
Well made lipo battery pack. Large size fits two phantom 3 batteries snugly. Construction is good, velcro is great. Refer to photos!
- A. KimberlyA bit small for what i need. If you have 2-3 3200mah batteries or 3-4 1300mah batteries, this would fir them just fine, however, any more batteries then that, then this might work for separating batteries, but at that point, i would rather just build a battery bunker and divide it into separate sections. I do rc, so i currently have 5-6 1300 packs, and 2 6400mah packs, 2 1320, and a 1500. Great for small batteries, and also a great storage container for any lipo's that may be puffing or the ones you want to fix later.
A bit tight, but you can hold 3 dji mavic pro batteries in this configuration or two other ways. I would recommend a slightly wider bag so you can fit 4 properly or maybe individual bags? 2 batteries would move around a lot and you can only put them ontop of each other sideways, not side to side.
F. Shawna, Leicester
| TEENITOR FIREPROOF EXPLOSIONPROOF LIPO BATTERY SAFE BAG LIPO BATTERY GUARD SAFE BAG POUCH SACK CHARGE & STORAGE 185X75X60MM LARGE SIZE Feature | |
|---|---|
| Brand : | teenitor |
| Size : | Big size 185x75x60 |
| Weight : | 0.2 pounds |
| Model : | LP8-T |
| Quantity : | 1 |
| Order click here : | normally ships in 24 hours |
| Toy : | Best Hobbies (teenitor product review) for Teenitor Fireproof Explosionproof Lipo Battery Safe Bag Lipo Battery Guard Safe Bag Pouch Sack Charge & Storage 185x75x60mm Large size available as-of ( Apr 2020 ) |
| |
Integy RC Hobby C23212 LiPo Voltage Checker + Warning Buzzer
Item c23212 barcode: 91789008103
Integy-C23212-Voltage-Checker-Warning
| INTEGY RC HOBBY C23212 LIPO VOLTAGE CHECKER + WARNING BUZZER Advantages | |
|---|---|
| Brand : | integy |
| Size : | 1 Pack |
| Model : | C23212 |
| Quantity : | 1 |
| Order click here : | - |
| |
| Toy : | Best Toys And Games (integy product review) for Integy RC Hobby C23212 LiPo Voltage Checker + Warning Buzzer available as-of ( Apr 2020 ) |
XT60 Charge Cable
Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries. Directly connect to your batteries with xt60 connectors, and to your charger with 4mm banana plugs. Of heavy-duty 12 awg silicone wire gives you the flexibility to work in any charging setup. Specifications input connector: male 4mm banana plug output connector: female xt60 (with male bullets) wire type: 12 awg silicone length: 12"
ProgressiveRC-AC-XTC-XT60-Charge-Cable
| XT60 CHARGE CABLE Features | |
|---|---|
| |
| Brand : | progressiverc |
| Weight : | 0.11 pounds |
| Model : | AC-XTC |
| Quantity : | 1 |
| Order click here : | normally ships in 24 hours |
| Toy : | Best Toys And Games (progressiverc product review) for XT60 Charge Cable available as-of ( Apr 2020 ) |
Traxxas 2946 Charge Lead
Great product
This is the traxxas charge lead. Perfect for the ez-peak plus or any charger, install the traxxas charge lead with high-current connector to charge your traxxas power cell battery packs.
Traxxas-2946-Charge-Lead
See Traxxas 2946 Charge Lead (Toys And Games) FAQ.
Perfect for my lipo charging. -Notice from I. Pearson, North Dakota
Click to Show traxxas 2946 charge lead (toys and games) Details
Quality cable with thick wiring. Does not heat up when charging at 1c. Gets a little warm at 2c, but nothing to worry about. Using it with an turnigy accucel-6 80w charger on spc 2s lipo, 5000mah, 40c packs.
- L. KellyGreat price. Great product. Fast shipping. Excellent service. Thanks
Works
S. Nielsen, Tennessee
| TRAXXAS 2946 CHARGE LEAD Feature | |
|---|---|
| |
| Brand : | traxxas |
| Weight : | 0.5 pounds |
| Model : | 2946 |
| Quantity : | 1 |
| Order click here : | normally ships in 24 hours |
| Hobby : | Best Toys And Games (traxxas product review) for Traxxas 2946 Charge Lead available as-of ( Apr 2020 ) |
