Crazepony 4pcs 250mah 1s 3.7v 35c Blade Inductrix Lipo Battery (w1604414g88b281) 4021

Review for blade inductrix lipo

Price was $14.99. The first two days with my inductrix fpv resulted in a couple minutes of flying followed by charging the one battery that came with the unit followed by a couple more minutes of flight time and some more charging. The four pack of these batteries was just what i needed. They work great, they fit the inductrix fpv like they should, they plug right into my 4 port charger, after about 20 flights on each battery not a single problem or puffing, and they cost about half of what oem batteries would have costed me. The only problem i can see with these batteries is that i am going to need to order more motors. . The factory battery is already starting to drop flight time on me but it probably has extra 10-20 flights on the battery. I have only had the batteries for about a week of good flying, i will follow up after a month or so to see if the flight time is holding or how the battery longevity is. Flight time is pretty stable around 2-2. 5 minutes but this is a inductrix fpv problem not a battery issue and horizon is aware of it.

-M. Garner

4pcs 250mah 1s 3.7v 35c blade inductrix lipo 4pcs 250mah 1s 3. 7v 35c blade inductrix lipo battery features: capacity: 250mah voltage: 3. 7v 1s dimension: 50mm * 12mm * 5. 5mm the discharge plug/charging plug: molex1. 25 high -crazepony 4pcs 250mah 1s 3.7v 35c blade inductrix lipo battery

  • Extras: Weight: 5. 4g/per Unit.
  • Extras: Upgraded 35c Discharge Built To Fit Perfectly In Your Blade Inductrix, Tiny Whoop.

Purchase Crazepony 4pcs 250mah 1s 3.7v 35c Blade Inductrix Lipo Battery (Toys And Games)

Buy Now

Introduction

Seem to be high quality and work well. I have 20 or so flights against these batteries and they are great. Seeing 15-20 seconds or so more flight time on average over e-flight 200 mah battery. Any extra flight time is nice, but not sure 15 extra seconds is worth any additional cost over 200mah alternatives. The Best blade inductrix lipo as-of ( Nov 2020 ) | Crazepony-Toys And Games Review Extras Crazepony 4pcs 250mAh 1S 3.7V 35C Blade Inductrix Lipo Battery Dimension: 50mm * 12mm * 5. 5mm. Weight: 5. 4g/per unit. Upgraded 35c discharge built to fit perfectly in your blade inductrix, tiny whoop. Equipped with ultra micro plugs(molex1. 25) out of the box means you don't have solder or change a thing. just charge and fly. .

Crazepony 4pcs 250mah 1s 3.7v 35c Blade Inductrix Lipo Battery Review (w1604414g88b281)

I was skeptical about the truth of the mah of the battery since it's smaller than my whoop juice 205 mah, but i get identical flight times on my tiny whoop. 3 minutes with insane motors on an e010 frame using the beebrain fc & the crazepony aoi camera/vtx w/ whip antenna and the cool little canopy/camera mount they now provide. They have just as good of punchout as the whoop juice, if not slightly better. My only concern is that they get much hotter after a full flight than the whoop juice batteries do, which could result in a shorter life span. 4 stars because of the heat issue. -F. Evelyn

Crazepony 250mah Blade Inductrix Battery

  1. Class: Toy
  2. Brand: Crazepony
  3. Color: As Shown
  4. EAN: 0190033559054
  5. Product Dimensions:
    Height:0.26 inches
    Length:1.62 inches
    Weight:0.4 pounds
    Width:0.47 inches
  6. Manufacturer: Crazepony
  7. Recommended Max-Age: 1200
  8. Suggested Min-Age: 120
  9. MPN: W1604414G88B281
  10. Part/Serial Number: W1604414G88B281
  11. Type: Toy
  12. Category: TOYS AND GAMES
  13. Size: Small
  14. UPC: 190033559054

4pcs 250mah 1s 3.7v 35c blade inductrix lipo Toy, 4pcs 250mah 1s 3. 7v 35c blade inductrix lipo battery features: capacity: 250mah voltage: 3. 7v 1s dimension: 50mm * 12mm * 5. 5mm the discharge plug/charging plug: molex1. 25 high density with great safety fits blade inductrix, blade nano qx, nano cpx, blade mcx, blade mcx2, umx radian, champ, umx t-28, night vapor, umx corsair, whipit, sport cub s etc weight: 5. 4g/per unit - package including 4 * 250mah 1s 3. 7v 35c lipo battery Crazepony 4pcs 250mah 1s 3.7v 35c Blade Inductrix Lipo Battery (-Crazepony).

Crazepony 250mah Blade Inductrix Battery Toy

blade inductrix lipo Crazepony 4pcs 250mAh 1S 3.7V 35C Blade Inductrix Lipo Battery (Switch to Mobile/Desktop Version)

They power my little blade inductrix, which is nice. They charge up via the usb charger in about 15 - 20 minutes; also nice. . These batteries do exactly what i need them to do. They're small and light for my tiny little ultralight drone. They have a decent 3-ish minute lifespan, which is about all you can expect for something so tiny. They also seem to hold a charge pretty well - i only take my drone out once every few weeks, and the batteries are always ready to go, even after weeks of being stored at full charge. . In my original order, i received the four batteries. Three worked great, but one was puffy and looked ready to rupture. I complained and the company immediately sent out a replacement. (i didn't even have to ask for a new one, they just e-mailed me to tell me a replacement was being shipped. ) i was expecting just one battery to replace the one that was faulty, but they sent another 4-pack. So now i have 7 good batteries. . I don't know if the one faulty battery was indicative of a larger problem or just a one-time fluke, but the fact that they reached out to me to replace it (and the new set didn't have any problems) makes me feel good about this company.

Crazepony 4pcs 250mah 1s 3.7v 35c Blade Inductrix Lipo Battery
Click to see NoticeCrazepony 4pcs 250mah 1s 3.7v 35c Blade Inductrix Lipo Battery (w1604414g88b281)"Great quality small 1s lipo pack only weighing in at 5g im using it on my eachine 010 clone of the tiny whoop and makerfire. Im able to achieve easily five min flight times unless flying more agressive than expect to have lower flight times, however i have no problem with performance output from the battery packs even though one of them did not recharge at the norm 4. 2v i was able to bring it down via a small 3v led bulb and battery checker so far not having issues with it i shall soon be testing it with my battery modded h911 to see how much flight time i get since it is lighter than the original upgraded 200mah 1s."


Crazepony FPV Micro AIO Camera 5.8G 40CH 25mW Transmitter Y Splitter FPV Drone like Blade Inductrix etc

Specification output power: 25mw supply voltage: 2. 9-5. 5v size : 47 * 14. 8 * 12. 5 mm weight: 3. 6g antenna exclusive dipole whip antenna power consumption: 200 215ma5v dcin frequency: 5. 8ghz 5 bands 48 channels, with raceband: 5362 5945mhz field of view: 120 degrees viewing angle operating temperature: -10 +60 ambient temperature: 25 channel sel:touch switch channel indicate:ch1 ch8 channel indication with 8leds and a f frequency, group indicate with 6leds modulation type fm transmit power: 13 1dbm; frequency control: pll all harmonic: max -50dbm frequency stability: 100khz (typ. ) frequency precision: 200khz (typ. ) channel carrier error: 1db antenna port: 50 Ω sensor:pal: 720x540/ntsc:640x480 1/4" lens angel: h:120 /v:100 base-band interface: (p1. 27*2) profile dimension: 14. 5mm*12. 2mm+14. 5mm*12mm package including 1 * fpv micro aio camera1 * micro jst 1. 25 to 2 pin wafer cable 1. 5cm y splitter

Crazepony FPV Micro AIO Camera 5.8G 40CH 25mW Transmitter Y Splitter FPV Drone like Blade Inductrix etcCrazepony-Camera-Transmitter-Splitter-Inductrix

CRAZEPONY FPV MICRO AIO CAMERA 5.8G 40CH 25MW TRANSMITTER Y SPLITTER FPV DRONE LIKE BLADE INDUCTRIX ETC Highlight
Brand :    crazepony
Color :    Standard
Weight :    0.1 pounds
Model :    VQP1405137UEHR388
Quantity :    1
Order click here :    normally ships in 24 hours
Photography :    Best Surveilance Systems (crazepony product review) for Crazepony FPV Micro AIO Camera 5.8G 40CH 25mW Transmitter Y Splitter FPV Drone like Blade Inductrix etc available as-of ( Nov 2020 )
Price :    $23.99
  • Wide lens angle. miniature and light weight design
  • Supporting touch switch select channel frequency group, supporting ntsc/pal switch, support vertical inverted image switch.
  • 8led display channel and 6leds display frequency group information, 1led display pal/ntsc and flip information.
  • Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jst 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop blade inductrix .
  • Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm.

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

Great add on for my charger. I'm happy with the product, wish it would have came in the 2 days. Oh well there's always next weekend to fly.

Crazepony 1s lipo battery charging board blade inductrix ultra micro jst-ph parallel connect plate specifications: input charge connector: male 4mm banana plug output connector: 6x micro jst 1. 25; 6x jst-ph 2. 0 wire type: 18 awg silicone charge lead max charge rating: 1. 5a per battery fuse rating: 1. 5a board size: 62. 5x32x5mm weight: 17g *micro jst 1. 25 aka ultra micro jst, mcx, pico, molex 1. 25 etc. *jst-ph 2. 0 aka high current ultra micro, mcpx, powerwhoop etc. Package including 1 * 1s lipo battery charging board

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPXCrazepony-Battery-Charging-Inductrix-Parallel

Crazepony Battery Charging Inductrix Parallel (I173540MK5WV281) FAQ.

This is a great product. I gave it 4 stars as it doesn't come with any instructions. For example if you have more than one bat plugged in you can increase the charging current. This would have been good to know. -Notice from J. Nicole, Reading

Click to Show crazepony battery charging inductrix parallel (i173540mk5wv281) Details

Great accessory and i can now charge 6 mini whoop batteries at once in under 10 minutes and have half hour uninterrupted fly time between charges!

Crazepony-battery-charging-inductrix-parallel-(i173540mk5wv281) set picture

- L. DebraThis is exactly what i was looking for to charge multiple tiny whoop batteries (molex 1. 25 connectors). You can parallel charge 6 at a time. Always pay close attention when parallel charging, it is not the safest way to charge and can cause the batteries to get damaged or blow up. This is true with all parallel charging though. I haven't had issues with this yet though and many, many people parallel charge and never have problems. I would definitely recommend this to a person looking to charge multiple tiny whoop batteries at once.

This board is great, charges 6 battery's at a time. Would have got 5 stars but some of the connections are cocked a little bit to the left and right. Instructions are. The amount of battery's times the amount of milliamps. Example. 6 battery's at 220mah is 1320. Which is 1. 3 just add a decimal after the first number. You charge it as 3. 7 volts/ 1s at 1. 3 amps. Takes about 45-50 minutes

O. Sharon, Kansas

CRAZEPONY 1S LIPO BATTERY CHARGING BOARD BLADE INDUCTRIX ULTRA MICRO JST-PH PARALLEL CONNECT PLATE MCX MCPX Pros
Price :    $7.99 (was $12.99)
  • Charge 6 batteries at the same time, keep your tiny whoop staying in the air
  • Board size: 62. 5x32x5mm, weight: 17g(0. 6ounces)
  • Output connector: 6x micro jst 1. 25; 6x jst-ph 2. 0
  • Input charge connector: male 4mm banana plug
  • Suitable for battery of blade inductrix, glimpse, mcp x, nano qx 3d, nano cp x, nano qx etc
Brand :    crazepony
Size :    Small
Weight :    0.4 pounds
Model :    I173540MK5WV281
Order click here :    normally ships in 24 hours
Toy :    Best Toys And Games (crazepony product review) for Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX available as-of ( Nov 2020 )

Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop Crazepony FPV Micro AIO Camera

3pcs f04 fpv camera vacuum plastic mount tiny whoop for crazepony fpv micro aio camera description: this is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops. It is still low enough to look down between the ducts to drop thru small slots or gaps. This is a camera/vtx mount for the f04 fpv camera within 3 colors of green, red, transparent color. With very light weighs in at 1. 4g. Small size is only 4. 7 * 4. 0 * 1. 5 cm. Holds the camera securely and eliminates the chance of tearing a smd component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation. Package including 3 * f04 fpv camera vacuum plastic mount

Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop Crazepony FPV Micro AIO CameraCrazepony-Camera-Vacuum-Plastic-Mount

CRAZEPONY 3PCS F04 FPV CAMERA VACUUM PLASTIC MOUNT TINY WHOOP CRAZEPONY FPV MICRO AIO CAMERA Spotlight
Price :    $7.99
  • All stock hardware is used, super simple installation.
  • Holds the camera securely and eliminates the chance of tearing a smd component of the board with aggressive double sided tapes.
  • It is still low enough to look down between the ducts to drop thru small slots or gaps.
  • This is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops.
  • This is a camera/vtx mount for the f04 fpv camera. with very light weighs in at 1. 4g. small size: 4. 7 * 4. 0 * 1. 5 cm.
Brand :    crazepony
Weight :    0.1 pounds
Model :    MIR1823206D1JC388
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Powersports Protective Gear (crazepony product review) for Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop Crazepony FPV Micro AIO Camera available as-of ( Nov 2020 )

Crazepony 6pcs Foam Battery Compartment Adaptors Eachine E010 Frame Tiny Whoop

Description: dimension:35*22. 2*7. 5mm weight: about 0. 27g/pc color: random( red, black, yellow, blue) package including 6 * foam insert(random color)

Crazepony 6pcs Foam Battery Compartment Adaptors Eachine E010 Frame Tiny WhoopCrazepony-Battery-Compartment-Adaptors-Eachine

CRAZEPONY 6PCS FOAM BATTERY COMPARTMENT ADAPTORS EACHINE E010 FRAME TINY WHOOP Spotlight
Price :    $7.49 (was $7.99)
  • Weight: about 0. 27g/pc
  • Dimension:35*22. 2*7. 5mm
  • Color: random( red, black, yellow, blue).
  • For eaching e010 (black) frame to fit the standard tiny whoop style batteries
Brand :    crazepony
Size :    small
Weight :    0.1 pounds
Model :    Q1754072H9L9281
Order click here :    normally ships in 24 hours
Toy :    Best Toys And Games (crazepony product review) for Crazepony 6pcs Foam Battery Compartment Adaptors Eachine E010 Frame Tiny Whoop available as-of ( Nov 2020 )

Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Rubber Rings

Description: motor diameter: 6mm motor length: 15mm shaft diameter: 0. 8mm cable length: 56mm weight: 1. 8g each no load speed: 70000 15% rpm rated load speed: 40500 15% rpm motor wire: clockwise motor(with red blue), anti-clockwise motor(with black white) option: with 1. 25mm jst plug quantity: 4 pcs (2 cw and 2 ccw) work for blade inductrix, tiny whoop, nano qx etc bonus rubber rings package including 2 * cw motor 2 * ccw motor

Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Rubber RingsCrazepony-4pcs-6x15mm-Motor-Speed

CRAZEPONY 4PCS 6X15MM MOTOR SPEED: INSANE 19000KV BLADE INDUCTRIX TINY WHOOP MICRO JST 1.25 PLUG RUBBER RINGS Overview
Brand :    crazepony
Size :    Small
Weight :    0.1 pounds
Model :    F085518GLVHT281
Order click here :    normally ships in 24 hours
Toy :    Best Toys And Games (crazepony product review) for Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Rubber Rings available as-of ( Nov 2020 )
Price :    $12.99 (was $19.99)
  • Insane for blade inductrix, tiny whoop, nano qx etc
  • Speed: insane, 19000kv / 70000 rpm
  • Motor diameter: 6mm, motor length: 15mm, cable length: 56mm
  • With 1. 25mm jst plug, perfect for inductrix fc
  • Weight: 1. 8g each , quantity: 4 pcs (2 cw and 2 ccw)

Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - Blade Inductrix/FPV

If you're flying on an inductrix frame, you need to have bought this yesterday. All other combinations are a waste of time with heavier frames, more powerful motors, bigger batteries. A stock inductrix with this frame support has been the best my inductrix has ever flown. I've crashed really hard to with the props popping off and the frame and this are just fine. Just be careful putting this on as it's a tight fit (which is what we want) but you can easily strip the motor wires if you don't pay attention and are too excited like i was. I've gone through a lot of combinations but this on a stock inductrix has given me the best flight performance and battery life out of everything i've tried so far.

1. Description: - support frame stiffening and simple installation without any glue or fastening. - material: 3k pure carbon fiber. - weight: 0. 59(g) 0. 02(oz). - use for stock or cnc kit (6mm motor) - blade inductrix/fpv. 2. Package included: 1 x rakonheli cnc 3k pure carbon fiber stiffener.

Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - Blade Inductrix/FPVRakonheli-Carbon-Fiber-Stiffener-Motor

Rakonheli Carbon Fiber Stiffener Motor (idtx483 cf) FAQ.

Works like a dang charm easy to put on and doesn't interfere with the battery -Notice from F. Angelica, Milton Keynes

Click to Show rakonheli carbon fiber stiffener motor (idtx483 cf) Details

This stiffener is made high quality and fits tight. Keeps the frame stiff, improves flight, and protects it from damage when landing hard on the feet. Highly recommend!

Rakonheli-carbon-fiber-stiffener-motor-(idtx483-cf) set picture

- G. AndersonThis little thing works far better than i expected. The inductrix flies really well right out of the box but this makes a noticeable difference in precision and stability.

Fit on my jjrc h36 (or eachine e010) perfect with a little elbow grease. Trick i used was to install the brace with the motors out and then slide them forcefully in. Frame is super solid now, sexy as ever, and no issues after crashes. Tiny bit of battery lose but won't notice it after battery modded. Buy it!

L. Mary, Reading

RAKONHELI CNC 3K PURE CARBON FIBER STIFFENER 6MM MOTOR - BLADE INDUCTRIX/FPV Pros
Brand :    rakon
Model :    IDTX483-CF
Order click here :    normally ships in 24 hours
Toy :    Best Toys And Games (rakon product review) for Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - Blade Inductrix/FPV available as-of ( Nov 2020 )
Price :    $4.99
  • Idtx483-cf
  • Rakon

Crazepony Battery Box Plastic Storage Case Foam Liner 1S Lipo Battery

Battery box translucent plastic storage case with foam liner for 1s lipo battery description: color: translucent material: plastic dimension: 160*90*60mm weight: 85g with foam liner inside available for 24pcs 1s lipo batteries package including 1 * battery box with foam liner

Crazepony Battery Box Plastic Storage Case Foam Liner 1S Lipo BatteryCrazepony-Battery-Plastic-Storage-Liner

CRAZEPONY BATTERY BOX PLASTIC STORAGE CASE FOAM LINER 1S LIPO BATTERY Spotlight
Brand :    crazepony
Size :    small
Model :    B130557I6ZAL281
Order click here :    normally ships in 24 hours
  • Lightweight and convenient plastic box
  • Inner foam liner provides maximum protection
  • Dimension: 160*90*60mm
  • Available for 24pcs 1s lipo batteries(not included), suggested width: 12mm, thickness: 6mm.
  • Weight: 85g
Price :    $8.99 (was $10.99)
Toy :    Best Toys And Games (crazepony product review) for Crazepony Battery Box Plastic Storage Case Foam Liner 1S Lipo Battery available as-of ( Nov 2020 )

Blade Main Frame: Inductrix

Blade main frame: inductrix, blh8706

Blade Main Frame: InductrixBlade-BLH8706-Main-Frame-Inductrix

BLADE MAIN FRAME: INDUCTRIX Review
Brand :    blade
Model :    BLH8706
Quantity :    1
Order click here :    normally ships in 24 hours
Hobby :    Best Toys And Games (blade product review) for Blade Main Frame: Inductrix available as-of ( Nov 2020 )

Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Bonus Rubber Rings

These don't seem quite as fast as the red special sauce motors from tiny whoop, but that might not necessarily be a bad thing. While it wasn't as punchy as the red motors, they're still strong and it feels smoother to control. I'd still probably get these again.

Description: motor diameter: 6mm motor length: 15mm shaft diameter: 0. 8mm cable length: 56mm weight: about 1. 8g no load speed: 65000 15% rpm rated load speed: 38500 15% rpm motor wire: clockwise motor(with red blue), anti-clockwise motor(with black white) option: with 1. 25mm jst plug quantity: 4 pcs (2 cw and 2 ccw) work for blade inductrix, tiny whoop, nano qx etc. Package including 2 * cw motor 2 * ccw motor

Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Bonus Rubber RingsCrazepony-4pcs-6x15mm-Motor-Speed

Crazepony 4pcs 6x15mm Motor Speed (8145949tqca5281) FAQ.

These are amazing! cannot beat the price and how fast they arrived! i made a side by side comparison video against stock inductrix whoops on youtube if you care to see type in texsunfu on youtube and check it out! . . Additionally i am including a picture that i wish i had before installing, follow the color coded to match the wires in the crazepony and you'll be set! -Notice from J. Pete, Alsace

Click to Show crazepony 4pcs 6x15mm motor speed (8145949tqca5281) Details

Marginally faster than 14k. Very noisy but are working so far!

Crazepony-4pcs-6x15mm-motor-speed-(8145949tqca5281) set picture

- X. TraceyThese work just a little better than the stock motors on my eachine e010c. This still has the stock fc. I'm putting a new fc to see if it helps improve performance because they are not as much power as expected. Will update after new flight controller. . After a fewd flights, these little motors scream now. Guess they needed a little break in period. Hover is less than half throttle, and it recovers from flips awesome. I am still running the stock eachine flight controller for now, but am excited to get a full acro fc in it and see how it flies then.

Bought these for my tired worn inductrix. Quality over quantity is the rule here because my flight times are significantly reduced with the same lipos, but oh, what a flight! the aircraft has gone from outrageously fun to insane! pirouetting funnels are things i could only do in the first minute or so of flight because i didn't have enough power to sustain the maneuver. Now, i can punch through whatever my sticks can dish out pretty much until the end of the battery.

T. Crawford, Camden

CRAZEPONY 4PCS 6X15MM MOTOR SPEED: FASTER 17500KV TW SPECIAL SAUCE EDITION BLADE INDUCTRIX TINY WHOOP MICRO JST 1.25 PLUG BONUS RUBBER RINGS Benefit
Brand :    crazepony
Size :    small
Weight :    0.1 pounds
Model :    8145949TQCA5281
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Toys And Games (crazepony product review) for Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition Blade Inductrix Tiny Whoop Micro JST 1.25 Plug Bonus Rubber Rings available as-of ( Nov 2020 )
Price :    $11.99 (was $19.99)
  • Work for blade inductrix, tiny whoop, nano qx etc.
  • Weight: about 1. 8g, quantity: 4 pcs (2 cw and 2 ccw)
  • Special sauce edition 17500kv 3. 7v / 65, 000 rpm
  • Motor diameter: 6mm, motor length: 15mm, with 1. 25mm jst plug
  • Bonus rubber rings

Crazepony 4pcs Propellers Red Tiny Whoop Eachine E010 RC Quadcopter Frame

frame wheelbase: 67mm material: pvc color: black, red quantity: 4pcs 4-leaf propellers and 1pc quadcopter frameand and 1pc battery foam usage: for eachine e010, blade inductrix or tiny whoop package including 4 * 4-leaf prop blades red 1 * rc quadcopter e010 frame black 1 * battery foam

Crazepony 4pcs Propellers Red Tiny Whoop Eachine E010 RC Quadcopter FrameCrazepony-Propellers-Whoop-Eachine-Quadcopter

CRAZEPONY 4PCS PROPELLERS RED TINY WHOOP EACHINE E010 RC QUADCOPTER FRAME Features
Brand :    crazepony
Size :    Small
Weight :    0.1 pounds
  • Including 4pcs 4-leaf propellers and 1pc quadcopter frame and 1pc battery foam
  • Little modification, more applications for blade inductrix
  • Frame wheelbase: 67mm, frame weight: 5g
  • Suitable for eachine e010 jjrc h36 or tiny whoop
  • Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv
Price :    $7.99 (was $8.99)
Model :    S141702NMXAZ281
Order click here :    normally ships in 24 hours
Toy :    Best Toys And Games (crazepony product review) for Crazepony 4pcs Propellers Red Tiny Whoop Eachine E010 RC Quadcopter Frame available as-of ( Nov 2020 )

crazepony 4pcs 250mah 1s 3.7v 35c blade inductrix lipo battery Price : 14.99, was : 17.99 as 2017-05-05
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Crazepony 4pcs 250mah 1s 3.7v 35c Blade Inductrix Lipo Battery (w1604414g88b281) Reviewed by on wujus.com

Top crazepony 4pcs 250mah 1s 3.7v 35c blade inductrix lipo battery (w1604414g88b281) Content

The F.A.Q. for crazepony 4pcs 250mah 1s 3.7v 35c blade inductrix lipo battery

I use an ultra power 120ac duo to charge these with a crazepony 1s parallel charging board and i'm getting 7m 30s flight times on average with vigorous flying! blade inductrix stock motors no fpv camera. These batteries also add about 25% more punch than 25c batteries. Liftoff is a tiny bit heavier but after initial launch this thing is zipping around with ease. I will be buying a lot of these. (will post results with fpv camera and upgraded motors when they arrive. )

A number of questions have been asked here.

Q&A

(0) Question: Will these work in nano cps


(1) Question: How do you charge these?


(2) Question: Will the 220mah fit the new blade inductrix fpv?


(3) Question: What's the maximum charging rate for these 220s


(4) Question: Can i use these for e010 if i chage the connectors


(5) Question: Can you charge with the charger that came with the drone?


(6) Question: Do these fit the hobbyzone sport cub s?


(7) Question: What is the maximum charge rate for these batteries? can i charge them at the 2c rate?


(8) Question: What is the safe recharge rate? often it's on the label, but it's not stated here.



(note) Question: where/how to get Crazepony (manufacturer's brand) accessories & similiar Crazepony's products


Hobbies 110927672, Remote & App Controlled Vehicle Batteries 1104314322, Remote & App Controlled Vehicle Parts 1106214322, Remote & App Controlled Vehicles & Parts 1100385296, Toys & Games 110397561Top Crazepony 4pcs 250mah 1s 3.7v 35c Blade Inductrix Lipo Battery (w1604414g88b281) FAQ Content

Best crazepony 4pcs 250mah 1s 3.7v 35c blade inductrix lipo battery (w1604414g88b281) in review

I'm consistently getting 20-30 seconds more run time with these than with the stock 200 mah battery for my inductrix fpv - the timer buzzes at 4 minutes and i get 20-30 seconds after that before the lights flash and it won't maintain altitude. Also, and perhaps more importantly, they fit great on the connector on the inductrix. The stock micro-connectors on the inductrix are notoriously finicky. I've had batteries for which i've had to add a tiny wad of paper as a shim to hold the connection with the battery tight enough to maintain power. I've also had batteries that i simply can't get to work at due to a loose connection with the battery. These stay on great and are not dislodged by bumps or crashes.

R. Pamela, Yukon Territory

You might like to see Count learn alphabet the learning on the bus goes on and on! the interactive count and learn alphabet bus by vtech will take your child on a fun learning adventure. kids can place each of the twenty-six -vtech count learn alphabet bus
  • Reviews: Place Each Of Twenty-six Abc Letter Blocks And Ten Number Blocks Into The Alphabet Toy Yellow School Bus' Learning Toy Responds With Letters, Phonics And Numbers.
  • Reviews: The Interactive Early Learning Toy Can Be Personalized To Recognize Your Child's Age And The First Letter Of Their Name When They Plug In That Number Or Letter.
Sale Vtech Count Learn Alphabet Bus (Toys And Games) 80 168900 Vtech Count Learn Alphabet Bus (80
Or you might like to consider 7.4v 2200mah 30c lipo battery pack w/ 3.5mm banana connector syma x8c x8w product highlights 2200mah lipo battery - higher capacity than the original manufacturer battery (2000mah) high c rating (30c) - made for syma x8c/x8w/x8g rc quadcopters better performance. -tenergy 7.4v 2200mah 30c lipo battery pack w/ 3.5mm banana connector syma x8c x8w x8g
  • Plus: 2200mah Lipo Battery - Higher Capacity Than The Original Syma Manufacturer Battery (usually 2000mah).
  • Plus: Higher Capacity Provides Longer Run Time For The Quadcopter And Applications.
Discounted Tenergy 2200mah Battery Banana Connector (Toys And Games) Tenergy 2200mah Battery Banana Connector

Q. Cunningham, South Dakota says

If you fly a blade or mini whoop, you want these batteries. They give you a bit more time and have a longer "charging life" then the ones with less mah's. I have also used the batteries as stand alone on my bigger quad. I just hook these directly to my camera/25mw transmitter combo, thus leaving the main batter out of the loop. That gives the quad more flying time.

T. Pamela, Calderdale

I bought these for my tiny whoop project to try to achieve longer flights. To my surprise they added about a extra minute and was very pleased with the results. When i did first receive the 4 batteries only 3 of them worked. However, someone from crazy pony reached out to me and sent me a new battery to replace the one that didn't work with no questions asked. They were vary persistent in making sure i was completely satisfied something i would of never imagined from a over seas distributor. I would highly recommend these batteries to any tiny whoop enthusiast!

L. Elida, North Carolina says

Great packs! the 50c rating on these is out of this world. The fpv inductrix flies so much faster it's hard to believe.

Z. Gina, New Mexico

Much better than the out of the box 150 mah ones. Especially if you've upgraded your motors!

D. Rita, Solihull says

I have been looking for batteries for my tiny whoop and i know people are on the fence between the 205mah batteries and these. (or at least i was on the fence). I have converted my blade inductrix to the tiny whoop using the fast motors (14, 000kv) and my stock battery went from about a 4 minute flight to 1:30 (note this is connecting the inductrix and the fpv camera to the stock 150mah battery). Everyone wants to get the longest flight time possible and some reviews were not clear to me as to how much more time i would get with these batteries using the tiny whoop. I can now fly 3:45 (this is what my timer on my radio is set to). I could fly to about 3:50 but if anyone know how the inductrix flies once you hit the low voltage cut-off it drops like a rock, so i give myself about 10 seconds to come back or land. . I have a 4 port charger and using all four batteries you will get about a 15 minute flight (depending on how aggressive you fly) once i was done i would just plug it back in. My charger is a bit slow but a few more minutes after my last flight i was up and running again with all 4. At some point i will buy another 4 so i can fly non-stop :). . The batteries fit perfectly into the inductrix, they are actually thinner than the stock battery but longer and does make it a lot easier to take the batteries in and out of the inductrix than the stock battery. The plugs work fine and i have had no issues with plugging them into my inductrix charger or the 4 port charger. . All-in-all it think they are a good value and seem to have good quality and would buy them again. . Also the shipping was quick even though they were not sent via online store prime. . Update as of 11/16/2016: i had posted previously that the batteries were dying after only :30 seconds to 1:00 of flight. I want to correct this and found what was causing the problem. I had also purchased the y connector from crazepony and the issue was a loose wire in the y connector. I would plug the battery in and everything would work find than after about :30 seconds the wire would disconnect and the tiny whoop would land (hard) and because of the hard landing the lights would start to blink looking like the battery was dead. I found the issue because the wire finally popped out. The batteries are good and getting just about 2:50 flight time. I am looking to reduce some weight on the camera and antenna in hopes to increase battery life. - yes i would buy these batteries again! also crazypony did contact me about my previous post and wanted to help me if the batteries were the problem, so thumbs up to crazypony!

I. Joanne, Mississippi

Hey crazypony, keep up the great work and keep giving us great products at a great price. What can i say, as always crazypony came thru with a great battery and a great price. These batteries say 50c on the package and i believe it, my inductrix fpv flies great. Love the packaging that these come in nice tubes which will make it really nice to carry batteries around.

Y. Nellie, Ealing says

These work great.

A. Meredith, Pays de la Loire

Works great, whoop can rip for 3minutes with these batteries and stock motors. These do sag after a minute of full throttle though. Great value for price

C. Mahood, Minnesota says

A 1s 3. 7 v 220 mah 50c battery. What's not to love? it runs my nano qx for 7 minutes. Also runs my tiny whoop inductrix with micro camera for 4-5 minutes.

W. Erickson, Franche-Comte

Works great in my tinywhooop

W. Yvette, Texas says

These batteries do not seem to last any time at all. I've had some go for about 30 secs and they are spent. I have other lipos of the same spec that will run my blade inductrix fpv for several minutes. These will not. Maybe i got some bad ones, but i am disappointed in them. Much shorter flight time than my other name brand lips. Not sure how others are getting 3min flight times on these. But i do not. . *update: the seller contacted me and sent me some new batteries to try. These do last a bit longer. I appreciate them taking the time to make a customer happy. Apparently though the low voltage cutoff (lvc) on the blade inductrix fpv could be the culprit. I haven't tried any mods to the inductrix yet. I have edited my review to reflect the good will on this company's part. And the lipos are lasting a bit longer than the first batch.

R. Terry, Limousin

Nice fit in inductrix fpv. Getting about 4 min of moderate/aggressive flying. Only about 5 cycles so far though. Best batteries i've used for micro quad.



Leave a Reply

You must be logged in to post a comment.


Top blade inductrix lipo Review Content

Related Products

Product Image Gallery

Top-crazepony-250mah-blade-inductrix-battery-40211mslaa9w-Content