Genuine 50watts Professional Balancing Discharger (Skyrc) 2546

Review for genuine 50watts professional balancing discharger

Price was $53.90. Skyrc imax b6ac v2 review. I use it to charge my 6000mah 2 cell lipo. I haven't needed to use it for charging anything else. I have a few thoughts/comments:. . -charging above 45w at sustained periods causes the charger to start getting really warm. When i'm charging my lipo at 6a, once the voltage gets to around 7. 5v and above the charger starts to heat up. By the time i have reached 8. 3v, before it starts to taper off, the charger is hot, to the point where i am concerned. I don't have any numbers, but suffice it to say that it is too hot to hold your fingers on for more than a few seconds. I didn't see any specs about a fan before i bought it, so i assume it doesn't have any cooling potential. My personal solution is to use a laptop cooling pad, and that does the trick very well. But it is inconvenient to have to use it. -charging at 6a is great. It can charge my 6000mah lipo in under 1 hour 20 minutes. -lots of different included connections (i only use the deans connection). -very solid/premium feel and build. . Conclusion:. I like this charger alot. But, it gets pretty warm when charging at 40w and alarmingly warm past 45w. I can imagine this might be a bigger issue for those charging a 3 cell lipo, because it would start out charging at 50w and continue the whole time, which might cause it to get even warmer than i have experienced. If this charger is supposed to have a cooling solution and i just got unlucky, then disregard this. However, if not, then be aware that your charger could get very warm, and be prepared to provide your own cooling solution. I docked 1 star because of the incurred inconvenience of needing to use a laptop cooling pad to keep temperatures in check. Other than that, i am pleased with this charger.

-D. Linda

Genuine skyrc imax b6ac v2 dual power 6amps,50watts lipo,lihv,liion,life,nicd,nimh,pb lead acid ac/dc professional rc balancing battery charger & discharger version 2 w/ micro usb port (skyrc) features:high 6. 0amp charge rate balance charges & balance discharges lipo, lion, life (1s-6s cells) storage mode to preserve battery longevity charges nimh, nicd (1-15 cells) auto consumer electronics

  • Feature: Lithium Battery Meter: Plug Your Lipo/liion/ Life Balance Plug Into The Charger And Use The Battery Meter As A Voltage Tester To Quickly See The Voltage Readings From Each Cell.
  • Feature: Internal Resistance Meter: Use This Function To Measure The Resistance In Each Of Your Lithium Battery’s Cells. This Helps Determine The Health Of Your Cells, To Be Sure You Are Getting The Most Power Out Of Them.

Modest Genuine 50watts Professional Balancing Discharger (Consumer Electronics)

Buy Now

Prologue

Use it almost everyday. Charges 2s and 3s lipo batteries very well. A larger more powerful one would be nice but your gonna be limited as it is by your house wiring. 5 amps is a lot on a house circuit for a single thing, so larger would be bad! i normally just charge at 1. 5-3 amp to lengthen battery life plus keeps me from blowing circuit breakers. Pc link with interface is very useful in displaying each cell condition and graphically showing charging. The Best Genuine SKYRC iMAX B6AC V2 Dual Power (6Amps,50Watts) LiPo,LiHV,LiIon,LiFe,NiCd,NiMH,Pb Lead Acid AC/DC Professional RC Balancing Battery Charger & Discharger (Version 2) w/ Micro USB Port as-of ( Jul 2020 ) | Skyrc-Consumer Electronics Review Feature Genuine SKYRC iMAX B6AC V2 Dual Power (6Amps,50Watts) LiPo,LiHV,LiIon,LiFe,NiCd,NiMH,Pb Lead Acid AC/DC Professional RC Balancing Battery Charger & Discharger (Version 2) w/ Micro USB Port Genuine, authentic, original imax b6ac v2 charger by skyrc w/ anti-fake holographic serial number on the back of the charger. this number can be inputted into skyrc's website to prove its authenticity.. Lithium battery meter: plug your lipo/liion/ life balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell.. Internal resistance meter: use this function to measure the resistance in each of your lithium battery's cells. this helps determine the health of your cells, to be sure you are getting the most power out of them.. Terminal voltage control: the voltage at which the charger cuts off the charge to each cell can be adjusted. lipo 4. 18v-4. 25v (default 4. 20v) / liio 4. 08v-4. 20v (default 4. 10v) / life 3. 58v-3. 70v (default 3. 60v). Pc connectivity & upgradable firmware: control your charger and update it with new firmware via the built in usb port. the software (pc only) can be downloaded from skyrc's website for free. .

Genuine SKYRC iMAX B6AC V2 Dual Power 6Amps,50Watts LiPo,LiHV,LiIon,LiFe,NiCd,NiMH,Pb Lead Acid AC/DC Professional RC Balancing Battery Charger & Discharger Version 2 w/ Micro USB Port Review (756320748169)

I just bought this charger 2 weeks ago. So far so good. I bought this to charge a 2 cell battery and it works great so far. It comes with an ac power chord which is a good feature. Out of the box it was very easy to figure out how to charge and it has several options, balance, fast charge, storage , and discharge. 2 things could bump this up to 5 stars - durability and 1 cell charging. I've had issues with a few other chargers where they broke or stopped working properly after 4-6 weeks so i'll update the review later. If you are looking at other chargers or lower cost chargers, be careful saving a few bucks b/c it may cost you more $ in the long run. My buddy has a 1 cell adapter, but haven't tried it. This would be great as a one shop charger. -Z. Cecilia

Genuine Skyrc Imax B6ac V2 Dual Power 6amps,50watts Lipo,lihv,liion,life,nicd,nimh,pb Lead Acid Ac/dc Professional Rc Balancing Battery Charger & Discharger Version 2 W/ Micro Usb Port

  • Rank: Toy
  • Brand: SkyRC
  • Color: Blue
  • EAN: 0756320748169
  • Product Dimensions:
    Height:2.30 inches
    Length:8.30 inches
    Weight:2.10 pounds
    Width:8.00 inches
  • LegalDisclaimer: SKYRC Offers A Great 1 Year Warranty On Their Chargers. This Warranty Covers Manufacturers Defects. This Warranty Does Not Cover End-user Misuse Or Abuse. In The Event Of A Repair/replacement The Customer Is Responsible For Shipping The Unit To Us In NY, While We Will Cover The Cost Of Shipping The Unit Back To The Customer.
  • Manufacturer: SKYRC
  • Suggested Min-Age: 120
  • MPN: 756320748169
  • Quantity: 1
  • Part/Serial Number: 756320748169
  • Group-Order: Toy
  • Category: CONSUMER ELECTRONICS
  • Product-Name: Genuine SKYRC IMAX B6AC V2 Dual Power (6Amps,50Watts) LiPo,LiHV,LiIon,LiFe,NiCd,NiMH,Pb Lead Acid AC/DC Professional RC Balancing Battery Charger & Discharger (Version 2) W/ Micro USB Port
  • UPC: 701413537779

Toy(701413537779:Consumer Electronics), Genuine 50watts Professional Balancing Discharger (0756320748169:Skyrc), Features:high 6. 0amp charge rate balance charges & balance discharges lipo, lion, life (1s-6s cells) storage mode to preserve battery longevity charges nimh, nicd (1-15 cells) auto charge mode for nimh charges lead-acid (2v-20v) many safety features: capacity cutoff, time limit cutoff, temperature cutoff 10 battery memory storage settings nimh cycling, charge discharge, up to 5 times to refresh battery life user definable charge rates from 0. 1 amps to 6. 0 amps 50 watt max output. charge amperage auto adjusts depending on battery voltage. balance port built in (balances 2s-6s batteries) 5 charging plugsmenu options:lipo, liio, life balance charge charge fast charge storage mode discharge nimh, nicd charge auto charge discharge w/ adjustable terminal voltage re-peak cycle pb (lead acid) charge discharge battery meter (shows voltage of each cell in lithium pack, total voltage, highest voltage, lowest voltage) internal resistance tester (shows each cells internal resistance, total resistance, highest resistance, lowest resistance) system settings safety timer mah capacity cutoff temp cutoff (requires optional temp probe. ) temperature units rest time nimh & nicd sensitivity key beep & buzzer input power low voltage cutoff load factory settings version serial number.

Genuine 50watts Professional Balancing Discharger Toy

Genuine 50watts Professional Balancing DischargerGenuine SKYRC iMAX B6AC V2 Dual Power (6Amps,50Watts) LiPo,LiHV,LiIon,LiFe,NiCd,NiMH,Pb Lead Acid AC/DC Professional RC Balancing Battery Charger & Discharger (Version 2) w/ Micro USB Port (Switch to Mobile/Desktop Version)

This works as advertised, i have been using it nonstop since i received it. I had bought a lot of old motorola cell phone batteries that was stored on a shelf for 10 years. 3. 7 v lithium ion batteries. I am using this charger to bring them back to life and it has been worth every penny and price i paid for it. You can also look at peoples reviews on youtube to see that this charger is worth every penny. That's what i did, youtube help to convince me to get it and it has been worth it.

Genuine 50watts Professional Balancing Discharger (Consumer Electronics)
Click to see NoticeGenuine 50watts Professional Balancing Discharger (Skyrc)"This charger does everything you could ask for and more. The "and more" part? you can connect it to a pc and update firmware, and as of this review the most recent firmware update was just a few months ago in september 2016. For example, the charger did not originally come with a high voltage lipo mode (4. 35 per cell rather than 4. 20 per cell), but a firmware update added that capability. And it charges lihv well too - there's a totally separate mode, and a warning screen before charging to make sure you didn't accidentally start charging a normal lipo with lihv settings. . Additionally, the menu system is easy to navigate, and it's packed with features outside of just plain old charging (detailed internal resistance measurements, ability to calibrate the internal voltmeter, battery meter, battery memory profiles, pc controlled charging). . When i got started in rc i contemplated getting an expensive multi-port charger with high current capability. Now that i've been doing it for a while, i'm really glad i didn't spend more. This is definitely the sweet spot for price/performance. I rarely need more than 50w charging capability, and if i did for some sort of parallel charging etc, it would actually be more cost effective just to get a second b6ac v2 rather than buying a beefier charger."


Integy RC Hobby C23212 LiPo Voltage Checker + Warning Buzzer

Item c23212 barcode: 91789008103

Integy RC Hobby C23212 LiPo Voltage Checker + Warning BuzzerIntegy-C23212-Voltage-Checker-Warning

INTEGY RC HOBBY C23212 LIPO VOLTAGE CHECKER + WARNING BUZZER Advantages
Brand :    integy
Size :    1 Pack
Model :    C23212
Quantity :    1
Order click here :    -
  • Top-quality materials & superb craftsmanship
  • Preferred by knowledgable model hobbists & r/c enthusiasts
  • Most orders processed same day. reliable & fast shipping with tracking number
  • Genuine integy parts ship direct from our usa warehouse
  • 30-day limited warranty. if your shipment is coming from hong kong, china or the item is packaged without integy genuine header card & barcode then the item is a fake counterfeit product. you can report this to to get your money back. please mentioned that the item you received is not an authentic integy branded item and you will be refunded: https:///gp/help/customer/display. html? nodeid 201166010
Toy :    Best Toys And Games (integy product review) for Integy RC Hobby C23212 LiPo Voltage Checker + Warning Buzzer available as-of ( Jul 2020 )

Teenitor Fireproof Explosionproof Lipo Battery Safe Bag Lipo Battery Guard Safe Bag Pouch Sack Charge & Storage 185x75x60mm Large size

Well made lipo battery pack. Large size fits two phantom 3 batteries snugly. Construction is good, velcro is great. Refer to photos!

Features: this flame retardant bag is a convenient way of safeguarding your lipo batteries during charging, transit, and storage. It is large enough to place multiple batteries at once for safer charging and storage of batteries fireproof and explosionproof warning: never leave charging battery unattended. Always ensure the battery is on a non-flammable surface. Ensure flap is sealed while charging the lipo safe bag is intended to reduce the chances of damaged in the event of a lipo fire. Package includes: 1 x teenitor? lipo safe bag(large size) if any questions, please do not hesitate to contact teenitor and we will try our best to help you !

Teenitor Fireproof Explosionproof Lipo Battery Safe Bag Lipo Battery Guard Safe Bag Pouch Sack Charge & Storage 185x75x60mm Large sizeTeenitor-Fireproof-Explosionproof-Battery-185x75x60mm

See Teenitor Fireproof Explosionproof Battery 185x75x60mm (LP8-T) FAQ.

These bags are good for storing my redcat 2s and 3s lipos but not for using as a safety device while charging cuz the 'balance' wire and connector aren't long enought to protude outside of the 'safe'. However, online store does have another style of this 'safe' that opens on the end so the batteries slide into the 'safe' and that style will work when the 'balance' connector has to be used for charging like on redcat lipos. But, like i said, they are good for storage and transport, so i bought another for that purpose. They will hold 3 2s lipos, but i only store two per 'safe'. I also label the outside of the 'safe' with what type of battery is contained inside, either 2s or 3s and the mah so i can easily grab the correct batteries needed. The 'safe' is well made with good velcro used for closing them up. Well worth the price! . Here is the link for the 'safe' which will allow charging via the balance connector:. Http://www. Online store. Com/hobbytiger-retardant-battery-charging-190x60x82mm/dp/b01d88idh2? ie utf8&psc 1&redirect true&ref oh aui detailpage o01 s00 -Notice from O. Reed, Birmingham

Click to Show teenitor fireproof explosionproof battery 185x75x60mm (lp8-t) Details

Could use a small space for putting the cables through to charge, but otherwise good stuff. Hopefully i'll never have to review it based on it's fire retardant characteristics. Sidenote - bear in mind the sizes listed are in millimetres. So the 'big size' bag comfortable holds the two venom 4000mah hard case cells i also ordered, but no room for a third. Not the sellers fault, but i was surprised when i opened the box.

Teenitor-fireproof-explosionproof-battery-185x75x60mm-(lp8-t) set picture

- U. BrendaThis is an excellent product to protect our batteries mini drones, because it is very small. It is built with good materials and looks aesthetically good. I tried it with several batteries of different size and fit very well. . In short, an excellent product that we can avoid accidents. . Teenitor fireproof explosionproof lipo battery safe bag lipo battery guard safe bag pouch sack for charge & storage 185x75x60mm large size

A bit small for what i need. If you have 2-3 3200mah batteries or 3-4 1300mah batteries, this would fir them just fine, however, any more batteries then that, then this might work for separating batteries, but at that point, i would rather just build a battery bunker and divide it into separate sections. I do rc, so i currently have 5-6 1300 packs, and 2 6400mah packs, 2 1320, and a 1500. Great for small batteries, and also a great storage container for any lipo's that may be puffing or the ones you want to fix later.

A. Kimberly, Newfoundland and Labrador

TEENITOR FIREPROOF EXPLOSIONPROOF LIPO BATTERY SAFE BAG LIPO BATTERY GUARD SAFE BAG POUCH SACK CHARGE & STORAGE 185X75X60MM LARGE SIZE Reviews
  • Material: fire-proof material
  • Use: for safer charging and storage of batteries
  • Teenitor brand products.
  • Dimensions (lxwxd): 185 x 75 x 60mm (large)
  • Weight: 70g
Brand :    teenitor
Size :    Big size 185x75x60
Weight :    0.2 pounds
Model :    LP8-T
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Hobbies (teenitor product review) for Teenitor Fireproof Explosionproof Lipo Battery Safe Bag Lipo Battery Guard Safe Bag Pouch Sack Charge & Storage 185x75x60mm Large size available as-of ( Jul 2020 )

Crazepony 2pcs EC2 Charging Cable Wire Connector to 4.0mm Banana Plug Hubsan H501S X4

Specifications: awg:14awg length:30cm width:5. 5mm height 12. 5mm application :high-current contact material :gold-plated cable cross-section :2. 5 sqmm capacity continuous current :30 a load max pulse current :60 a cable length :300 mm cable material :silicone wire diameter :0. 06 mm package including 2 * 30cm ec2 charing cable

Crazepony 2pcs EC2 Charging Cable Wire Connector to 4.0mm Banana Plug Hubsan H501S X4Crazepony-Charging-Connector-Banana-Hubsan

CRAZEPONY 2PCS EC2 CHARGING CABLE WIRE CONNECTOR TO 4.0MM BANANA PLUG HUBSAN H501S X4 Features
  • The cable is highly flexible with silicone tubing. ideally matched to the respective area of application loading
  • Length 30cm
  • Suitable for hubsan h501s x4
  • Partcore offers you the charger for charger with 4 mm socket eg graupner, futaba, lrp, carson, ansmann, voltcraft, kyosho, team orion
  • The 4 mm banana plug with finger springs are gold plated and have a sturdy rubber casing
Brand :    crazepony
Weight :    0.2 pounds
Model :    U084323F0ELD801
Quantity :    1
Order click here :    normally ships in 1-2 business days
Speakers :    Best Cable Or Adapter (crazepony product review) for Crazepony 2pcs EC2 Charging Cable Wire Connector to 4.0mm Banana Plug Hubsan H501S X4 available as-of ( Jul 2020 )

Fat Shark FSV2442 32ch 5G8 Race Band Receiver Module

Works perfectly, not much to say. Dip switches are a little hard to use without a little screw driver or small tool; but the whole unit work exactly as described.

Fat shark 32 channel, 5. 8ghz receiver module for modular equipped fat shark goggles (attitude v3, dominator series goggles).

Fat Shark FSV2442 32ch 5G8 Race Band Receiver ModuleFat-Shark-FSV2442-Receiver-Module

See Fat Shark Fsv2442 32ch 5g8 Race Band Receiver Module (Toys And Games) FAQ.

I need it to operate the fatshark dominator v3. I don't think there is another one cheaper i can use. I hate that i have to open the case just to switch bands. But it works. Expensive. -Notice from N. Carrie, Wisconsin

Click to Show fat shark fsv2442 32ch 5g8 race band receiver module (toys and games) Details

Works well on my fatshark dominator v3. Probably going to pick up a diversity rx some day but for now these should work fine.

Fat-shark-fsv2442-32ch-5g8-race-band-receiver-module-(toys-and-games) set picture

- X. FranklinFits perfectly in to my fat shark dominator v3. Works great. The only thing that is somewhat annoying is that you have to open the goggles to access the dip-switches.

Easy to use. Just got this for a cheap way to start. May be getting laforge some day just to have what everyone else has lol

A. Cassella, Hounslow

FAT SHARK FSV2442 32CH 5G8 RACE BAND RECEIVER MODULE Advantages
  • For use with modular fat shark headsets
  • Minus 90dbm sensitivity
  • Filtered against common rc rf noise
Brand :    fat shark
Color :    White
Size :    32"
Weight :    0.4 pounds
Model :    FSV2442
Quantity :    1
Order click here :    normally ships in 24 hours
Hobby :    Best Toys And Games (fat shark product review) for Fat Shark FSV2442 32ch 5G8 Race Band Receiver Module available as-of ( Jul 2020 )

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

This board is great, charges 6 battery's at a time. Would have got 5 stars but some of the connections are cocked a little bit to the left and right. Instructions are. The amount of battery's times the amount of milliamps. Example. 6 battery's at 220mah is 1320. Which is 1. 3 just add a decimal after the first number. You charge it as 3. 7 volts/ 1s at 1. 3 amps. Takes about 45-50 minutes

Lipo battery charging board 1s ultra microandamp; jst-ph parallel connect plate for blade inductrix, glimpse, mcp x, nano qx 3d, nano cp x, nano qx etc specifications: input charge connector: male 4mm banana plug output connector: 6x ultra micro; 6x jst-ph wire type: 18 awg silicone charge lead max charge rating: 1. 5a per battery fuse rating: 1. 5a dimension: 100x62. 5x25mm weight: 17g built-in fuses for safe charging package including 1 * 1s lipo battery charging board

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPXCrazepony-Battery-Charging-Inductrix-Parallel

See Crazepony Battery Charging Inductrix Parallel (I173540MK5WV281) FAQ.

I use this with my hitec 44167 x4 to charge the batteries for my nano qx in parallel. Works as expected, but you need to be aware that the batteries should be of the same exact sort and have the same remaining voltage. I use the charger to charge each battery by itself to a set voltage, then charge all in parallel once they each have matching voltages. -Notice from W. Pearson, Birmingham

Click to Show crazepony battery charging inductrix parallel (i173540mk5wv281) Details

In the mini drones you're going to need to use a lot of batteries because it sucks the battery down fast and this is a good board for charging multiple batteries. It's simple plug-in positive negative pop your batteries right onto the board itself and you're good to go as i said if you're flying the mini drones you're going through batteries because he only worked about 2 to 3 minutes and if you're like me you have 8 or 10 of those batteries 12 of them and you need to charge them all the time this is a great unit

Crazepony-battery-charging-inductrix-parallel-(i173540mk5wv281) set picture

- K. JudithGreat accessory and i can now charge 6 mini whoop batteries at once in under 10 minutes and have half hour uninterrupted fly time between charges!

Great add on for my charger. I'm happy with the product, wish it would have came in the 2 days. Oh well there's always next weekend to fly.

P. Bertie, Wokingham

CRAZEPONY 1S LIPO BATTERY CHARGING BOARD BLADE INDUCTRIX ULTRA MICRO JST-PH PARALLEL CONNECT PLATE MCX MCPX Reviews
Brand :    crazepony
Size :    Small
Weight :    0.4 pounds
  • Output connector: 6x ultra micro; 6x jst-ph
  • Suitable for blade inductrix, glimpse, mcp x, nano qx 3d, nano cp x, nano qx etc
  • Input charge connector: male 4mm banana plug
  • Dimension: 100x62. 5x25mm, weight: 17g(0. 6ounces)
  • Charge 6 batteries at the same time, keep your tiny whoop staying in the air
Model :    I173540MK5WV281
Order click here :    normally ships in 1-2 business days
Toy :    Best Toys And Games (crazepony product review) for Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX available as-of ( Jul 2020 )

Lipo Battery Low Voltage Tester Checker 1S-8S Buzzer Alarm LED Indicator

This product is suitable for various kinds of rc battery, when the voltage is below the set value, it will buzzer with red led light, pre-set value 3. 3v. Push the key which can change the voltage setting and save. Features: sharp backlit lcd screen, applicable under poor light condition compact and extremely portable suitable for various kinds of rc battery, such as lipo/li-ion/li-mn/li-fe battery easy to install specification: weight: 14g dimension: 40 * 25 * 11mm display: led voltage detection precision: 0. 01v unit voltage display range:0. 5-4. 5v total voltage display range:0. 6-36v 1s test mode voltage range: 3. 7-30v low voltage alarm mode for:1-8s alarm set value range: off-2. 7-3. 8v package includes: 1x lipo battery voltage tester(the battery cable do not included)

Lipo Battery Low Voltage Tester Checker 1S-8S Buzzer Alarm LED IndicatorBattery-Voltage-Tester-Checker-Indicator

LIPO BATTERY LOW VOLTAGE TESTER CHECKER 1S-8S BUZZER ALARM LED INDICATOR Spotlight
Brand :    integy
Size :    Size2
Model :    LE4987
Order click here :    normally ships in 24 hours
Home Improvement :    Best Tools (integy product review) for Lipo Battery Low Voltage Tester Checker 1S-8S Buzzer Alarm LED Indicator available as-of ( Jul 2020 )
  • Protect the battery from overcharging and overdischarging
  • Super loud alarm sound
  • Just plug into the balance plug and the led will cycle through the individual cell voltages as well as list the total voltage
  • Easy to use - works with any 1-8s lipo/li-ion/limn/li-fe
  • When the voltage is below the set value, it will buzzer with red led light, pre-set value 3. 3v. push the key which can change the voltage setting and save.

Floureon 2 Packs RC Lipo Battery Monitor Alarm Tester Checker Low Voltage Buzzer Alarm LED Indicator 1-8S Lipo LiFe LiMn Li-ion Battery

Features: 1. Test the working state of lithium battery. Protect the battery from overcharging or overdischarging. 2. Compatible for 1-8s lipo/ li-ion/ limn/ li-fe battery. The pin space is about 3mm (0. 12inch). Straight pin. Specification: dimension: 4. 0 x 2. 3 x 1. 1cm (1. 6 x 0. 9 x 0. 4inch) package weight: 15g (0. 5oz) voltage detection precision: 0. 01v unit voltage display range: 0. 5v-4. 5v total voltage display range: 0. 5v-36v 1s test mode voltage range: 3. 7v-30v low voltage alarm mode: 2-8s alarm set value range: off-2. 7v-3. 8v package included: 2x voltage buzzer alarm notice: when the voltage lower than the set value, it will buzzer with red led light. Pre-set value is 3. 3v. Push key can change the voltage setting and save.

Floureon 2 Packs RC Lipo Battery Monitor Alarm Tester Checker Low Voltage Buzzer Alarm LED Indicator 1-8S Lipo LiFe LiMn Li-ion BatteryFloureon-Battery-Monitor-Checker-Indicator

FLOUREON 2 PACKS RC LIPO BATTERY MONITOR ALARM TESTER CHECKER LOW VOLTAGE BUZZER ALARM LED INDICATOR 1-8S LIPO LIFE LIMN LI-ION BATTERY Advantages
Brand :    floureon
Color :    black
Model :    150117-F2
Order click here :    normally ships in 24 hours
  • Voltage mode low voltage alarm mode for 2-8s; alarm set value range: off-2. 7v-3. 8v; voltage detection precision: 0. 01v.  
  • What you get floureon 2 packs rc lipo battery monitor alarm tester for 1-8s with 1 year warranty and friendly customer service.
  • Reminder when the voltage lower than the set value, it will buzzer with red led light. pre-set value is 3. 3v. push key can change the voltage setting and save.
  • Function test the working state of lithium battery. protect the battery from overcharging or overdischarging.
  • Compatible for 1-8s lipo/ li-ion/ limn/ li-fe battery. the pin space is about 3mm (0. 12inch). straight pin.
Home Improvement :    Best Security Electronics (floureon product review) for Floureon 2 Packs RC Lipo Battery Monitor Alarm Tester Checker Low Voltage Buzzer Alarm LED Indicator 1-8S Lipo LiFe LiMn Li-ion Battery available as-of ( Jul 2020 )

SkyRC Temperature Sensor Probe, For Use With LiPo Chargers

The skyrc temperature probe is a handy way to monitor your battery pack temperature while charging. It comes equipped with a standard futaba-style plug which fits into almost all chargers.

SkyRC Temperature Sensor Probe, For Use With LiPo ChargersSkyRC-Temperature-Sensor-Probe-Chargers

SKYRC TEMPERATURE SENSOR PROBE, FOR USE WITH LIPO CHARGERS Advantages
Brand :    skyrc
Quantity :    1
Order click here :    normally ships in 24 hours
  • Temperature: 0 -80 c (0 -176 f) length: 325mm
  • The skyrc temperature probe is a handy way to monitor your battery pack temperature while charging. it comes equipped with a standard futaba-style plug which fits into almost all chargers.
Home Improvement :    Best Tools (skyrc product review) for SkyRC Temperature Sensor Probe, For Use With LiPo Chargers available as-of ( Jul 2020 )

XT60 Drone Connectors 5 Pairs 5 Male 5 Female

Already converted my radian glider to xt60. Now all my batteries and airplanes are xt60, so much more convenient! easy to solder. Don't forget the shrink tubing! also connected one of the male connectors to an 1157 (12v 2. 1 amp) automotive bulb to safely discharge my lipo batteries down to 11. 1 volts after flying for storage.

Made from high-temp nylon and gold plated bullet connectors, both included in the injection mold at the time when forming the connector. The xt60 ensures a solid high-amp connection, perfect for applications up to and beyond 65a constant. Xt60, designed by rcx to be more reliable and a better quality connection than deans t-connectors. These are not cheap copied xt60 plugs (abs). These original nylon xt60 plugs can handle over 60a current for extended periods without exceeding 80degc thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-nylon xt60 plugs.

XT60 Drone Connectors 5 Pairs 5 Male 5 FemaleXT60-Drone-Connectors-Pairs-Female

See Xt60 Drone Connectors 5 Pairs 5 Male 5 Female (Rcx Xt Connectors) FAQ.

Connectors seem to be good quality, but they only hold together by friction and not any indent so they will come apart without much effort. Just driving my truck wouldn't make them come apart. -Notice from J. Olga, Aquitaine

Click to Show xt60 drone connectors 5 pairs 5 male 5 female (rcx xt connectors) Details

No complaints here. I got these because i was going to need some of the female ends for mounting into some 3d printed parts. Worked just fine. I ended up using the male ends to replace some overly tight connectors on some batteries. These aren't too tight like some i've used. Material feels better as well.

Xt60-drone-connectors-5-pairs-5-male-5-female-(rcx-xt-connectors) set picture

- A. DebraThese are well made and difficult to separate as they should be. Good price, very good item. Promptly shipped and well packaged.

Quick pro tip. When soldering these, keep the male and female connectors plugged into eachother, this will keep the pins of the male connector straight, even if the plastic gets a little soft while you are soldering. Doing this also provides more plug to hold onto or secure with helping hands.

M. Guest, Languedoc-Roussillon

XT60 DRONE CONNECTORS 5 PAIRS 5 MALE 5 FEMALE Feature
Brand :    rcx xt connectors
Size :    XT60
Weight :    0.9 pounds
  • Xt-60
  • Xt60
  • Hightemp nylon bullet connectors
Model :    LYSB00G197NHW-TOYS
Quantity :    1
Order click here :    normally ships in 1-2 business days
Toy :    Best Toys And Games (rcx xt connectors product review) for XT60 Drone Connectors 5 Pairs 5 Male 5 Female available as-of ( Jul 2020 )

SKYRC SK-600075 WiFi Module Compatible Imax B6 Mini B6AC V2

This is the skyrc wifi module. Simply connect it to your charger or esc that supports the wifi module. Then download or open the skyrc app on your smartphone or tablet. Now you can control your charger or esc via your smartphone or tablet! product size: 60 x 30 x 10. 8mm input voltage: 5v dc - 17v dc input current: 200ma power: a maximum of 1 watt operating distance: 30m package size: 13. 5 x 9. 5 x 2cm package weight: 41g / 1. 5oz includes: wifi module charger micro usb cable esc servo plug connector user manual equipment needed: a skyrc charger or esc that supports the wifi module

SKYRC SK-600075 WiFi Module Compatible Imax B6 Mini B6AC V2SKYRC-SK-600075-WiFi-Module-Compatible

SKYRC SK-600075 WIFI MODULE COMPATIBLE IMAX B6 MINI B6AC V2 Reviews
  • Your smartphone connects to the module via wifi (android or apple iphone/ipad)
  • Edit the settings on your charger or esc from your phone app
  • Connects to your skyrc wifi module compatible charger or esc
Brand :    skyrc
Model :    MK-1364
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Toys And Games (skyrc product review) for SKYRC SK-600075 WiFi Module Compatible Imax B6 Mini B6AC V2 available as-of ( Jul 2020 )

Genuine 50watts Professional Balancing Discharger (Skyrc) Price : 49.97, was : 0 as 2017-02-15
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Genuine 50watts Professional Balancing Discharger (Skyrc) Reviewed by on wujus.com

Top genuine 50watts professional balancing discharger (skyrc) Content

The F.A.Q. for Genuine 50watts Professional Balancing Discharger (Skyrc)

This charger is built well in general and comes with numerous different connector types. It supports charging just about any battery i can think of and it does so quickly and quietly. . But, as nice as the charger is overall, the lcd backlight burnt out within just a few weeks of use, though this does not affect overall functionality otherwise and a backlight wasn't a reason for purchasing the unit to begin with.

A number of questions have been asked here.

Q&A

(0) Question: How long would it take to blance a 7. 4 venom lipo 2s 25c 5000mah?


(1) Question: Can you change the cut off voltage? i want to lower the voltage to increase battery life.


(2) Question: So do i just connect my battery and it will select the best way to charge it automatically?


(3) Question: Will this charge 3-cell, 11. 1v batteries?


(4) Question: Will it discharge & then automatically recharge to a storage setting?


(5) Question: Does it comes with a 220 european wall outlet power adapter?


(6) Question: Whats the maximum internal temperature that this should reach? (default is at 50 celsius)


(7) Question: Is this good for discharging batteries?


(8) Question: Bought from online store eflite plane battery. 3200mah 3s 11. 1v 20c lipo, 13awg ec3. would this charge it? if not other charger recommendation?


(9) Question: What connector/adapter will i need to charge battery for syma x5sw? i can't even find the name for that connector:((



(note) Question: where/how to get Skyrc (manufacturer's brand) accessories & similiar Skyrc's products

Answer:

https://wujus.com/genuine-50watts-professional-balancing-discharger-254617y2g4y2/

Click the marked text to copy link to Clipboard

Glad i found this on online store-when i looked for lipo chargers the only one i could find consistently was the dynamite charger, which does not include the popular dean's connector that my batteries are equipped with. . I am very pleased with this charger. It charges up to 6 amps, but since it still draws only 50w the utility of that is a bit limited. It works great, though, and charges my 5000 mamp smc battery in an hour. I am glad i located this, and i would buy it again. . This charger has decent instructions, though not outstanding; it is wise to have a basic understanding of lipo battery charging principles if you're a beginner. The controls are fine and easy to use. See the description, but it does come with a variety of connector options that connect to its default dean's plug. I believe (but cannot confirm) that it ships with more connector options than other chargers.


Battery Chargers 1105314322, Hobbies 110927672, Remote & App Controlled Vehicle Parts 1106214322, Remote & App Controlled Vehicles & Parts 1100385296, Toys & Games 110397561Top Genuine 50watts Professional Balancing Discharger (Skyrc) FAQ Content

Best genuine 50watts professional balancing discharger (skyrc) in review

Quality construction. Menu is fairly easy to navigate and well thought out given four button input system, though archaic in today's world of touch screens and easy interfaces. . I'm giving 4 stars instead of 5 stars because my particular model randomly fails with "ext. Temp too hi" message on the lcd when charging lipos. When this happens, the charger refuses to operate. I have to power cycle it, and sometimes even that doesn't work. The first time this happened, i didn't even have a temperature probe plugged in, so i was super confused. I bought a probe, hoping it would solve the problem, but it sometimes gives this error even with the probe installed. Sometimes, if i disconnect the balance plug from the charger, the error message does not occur. When this is the case, i try another battery, and sometimes that works. No clue what's going on there, but it happens rarely enough that it's not a huge deal. I probably just got a faulty unit.

H. Harrison, Sutton

You might like to see Gens Ace 5000mah Battery Traxxas (Gens Ace) Details: Brand: Gens Ace Capacity(mah): 5000mah Voltage(v): 11. 1v Discharge Rate (c): 50c Max Burst Discharge Rate (c): 100c Configuration: 3s1p Net Weight(dev. 20g): 380g Length(dev. Hobbies
  1. Items: Quickly Recharged, Long Cycle Life (150 Times Minimum), Up To 200wh/kg Energy Density.
  2. Items: Parameter: Weight, 380g; Dimension (l*w*h), 155. 3*46. 3*24mm; Connector: Traxxas Plug; Balancer Connector Type: Jst-xhr.
Lowest Price Gens Ace 5000mah 11.1v 3s 50c Lipo Battery Pack Traxxas Plug Traxxas Rc Cars (Hobbies) Gens Ace 5000mah 11.1v 3s 50c Lipo Battery Pack Traxxas Plug Traxxas Rc Cars
Or you might like to consider Star Wars Figure Discontinued Manufacturer (Star Wars) After Darth Vader And Luke Join Forces To Defeat The Emperor, Vader Asks Luke To Help Him Remove The Mask That Covers His Face. Re-create The Biggest Battles And Missions In The Star Toys And Games
  1. Benefit: Figure Is Part Of The First-ever 6-inch Series Of Star Wars Figures.
  2. Benefit: Careful Details Make Him Look Just Like The Star Wars Character.
Best Price Star Wars Black Series Darth Vader 6 Figure Discontinued Manufacturer (Toys And Games) A7268482 Star Wars Black Series Darth Vader 6 Figure Discontinued Manufacturer

O. Hadley, Stoke-on-Trent says

I've been involved in rc hobbies for years now and if there's one thing that will keep your models running their best, as well as save you money, is a state of the art, programmable battery charger. Having the ability to properly charge, discharge, balance and store your batteries will insure their long term peak performance and protect them against needless damage. I recently got into electric helicopters and like my cars, i've jumped in with all feet. I had very little exposure to lipo battery technology and needed to research their science and charging needs. It was obvious i needed a charger that was state of the art for this new battery technology. I settled on the skyrc imax b6ac v2 because of it's versatility, known quality and state of the art features. This specific model can plug into an ac outlet, connect to your car battery, power supply, etc. It's programming can be as automatic or as customizable as you choose. It's flexible enough to do just about any battery you're going to run into and is small enough to throw into your rc tool bag. The build quality, connectorization, lcd and 4 button program panel are plainly marked and extremely logical to use. The pricing, here at online store, is excellent and the included instruction manual is very well written. You will receive with the charger cables to accommodate all of the most common battery connectors as well as a panel to plug in the a lipo's balancing connector for 2-6 cell (2s-6s) batteries. It also sports the option to connect a temperature sensor (about $6) to keep an eye on the cells as well as a port for an optional wifi module ($20) that allows you to monitor progress and status during the charge process on your phone, tablet or pc (windows, android or ios). There are a lot of very capable charges available, but for the money, you will have a difficult time finding one that has the reliability, flexibility or quality you get with a genuine skyrc charger. In a hobby where you have so many opportunities to spend money, getting the best charger seems to be a small price to pay for the benefits you will receive.

G. Rhonda, East Sussex

This thing is a beast. With some practice and experimentation i can get a batch of lipo batteries charged and head out to destroy rc helicopters with my awesome flight skilz. Read the manual first, then ponder chinese linguistics, read it again and think back to high school electronics. Do your charging in a relatively fireproof setting just to be sure. I also bought a charging plate but didn't have all the connectors needed to make it all work, but this claims to have six amps and that should be good enough to charge six lipo packs. The real deal, not a clone, arrived quickly and in good shape.

J. Whiteman, Maryland says

One of the better battery charger i've purchased. This one is an authentic skyrc imax as i've verified at skyrc website. I like the power cord that came with so i didn't have to buy the cord. The unit allows me to see the battery resistance and amount of charge that is being transferred into battery. Albeit the high cost, i was looking for an easy to operate and yet sophisticated enough to diagnose the battery and charge/discharge on its own. This unit does seem to be charging the battery well and not over charge so far. . I've used this charger on rc receiver/transmitter batteries and lead acid tractor battery.

Q. Beale, Norfolk

Easy to use and displays all the info needed. Since i have traxxas rcs i needed a trxaxas plug adapter, of course this comes with 4 connectors and none of them at a traxxas connector. Bah. . So you'll need this connector with it if you need traxxas, . Https://www. Online store. Com/dp/b005efzmqi/ref cm cr ryp prd ttl sol 17

E. Amanda, Ontario says

Love this charger. I would also recommend picking up an extension balance cable and a fireproof bag for charging you lipos in. Make sure you read the manual carefully and do your homework before charging your batteries.

K. Paula, Greenwich

I checked straight out of the box if it was genuine, and it was! great product, solid build, great cooling. Over all very pleased with this one. I aslo bought a 6 battery charging plate to allow for multi-battery charging

R. Widmer, Barking and Dagenham says

One of the better battery charger i've purchased. This one is an authentic skyrc imax as i've verified at skyrc website. I like the power cord that came with so i didn't have to buy the cord. The unit allows me to see the battery resistance and amount of charge that is being transferred into battery. Albeit the high cost, i was looking for an easy to operate and yet sophisticated enough to diagnose the battery and charge/discharge on its own. This unit does seem to be charging the battery well and not over charge so far. . I've used this charger on rc receiver/transmitter batteries and lead acid tractor battery.

S. Hannah, Brandenburg

What a bargain. Already ordered the wifi adapter and temperature probe. For the $, this charger rocks. Limited to 50 watts, but at a dollar a watt, a good investment if you don't mind waiting a little extra time for charging, this ubnit does all the right task's. Hooked up to the free pc software, you get graphs, multiple pre-programmed charging scenarios, all stored on the charger. It charges everything, lipo, nicd, nimh, lead acid . A versatile charger with loads of features for a low price. . This unit was a real skyrc unit, with the proper holograph on the back and scratch off, coated serial number. If it costs less then this unit, it is likely a clone. Get the real deal. The real units have the hologram and serial number under the scratch off coating. If you don; lt have the hologram and serial number. The clones are known to be problematic. Get the real deal.

V. Melissa, Kansas says

Obviously, it works great. If it ever catches on fire, i'll update this review. Anyway, i appreciate a chinese product that comes with readable instructions. That's a huge plus for me, and it shows attention to detail, which one hopes is carried through inside the box. . The display is great, easy to read, the functions are easy to change a view without having read the manual. I. E. Intuitive. . 100% of the heat buildup is on the bottom of the device, so make sure you don't just leave it sitting on the bed while charging. . Flir thermal image attached.

V. Edna, Bedfordshire

Was so glad to replace my old $12 charger with this skyrc. I play airsoft regularly and this charges my lipo 7. 4 and 11. 1 efficiently and so much faster than my other charger. Very easy to program even for someone with no experience. It has multiple safeties on it so that you can not overcharge your battery or even incorrectly charge the battery with the wrong voltage. The one downside is if you are running a tamiya connector, you will need a deans to tamiya adapter to charge your battery. You have to plug the battery into two ports to charge it successfully and the system only comes with the deans connection. I had my airsoft tech craft me an adapter for $2 and i couldn't be happier.

Y. Marguerite, Tasmania says

I just got it today and i love it! i'm using it to charge my inductrix fpv batteries and it works fine! just plugged in my parallel board, plugged in all my batteries and charged them up! if you have question on charging tiny whoop batteries on a parallel board , feel free to ask! i'm a complete. Beginner to the fpv community, but if done enough research to keep me in the air with my inductrix and i'd be happy to help anybody with questions i may have had getting into the hobby c:

P. Allen, Shropshire

With an integrated power supply and the ability to charge all battery types (nicd, nimh, li-ion, lipo, life, lihv, and even lead acid), makes this charger a great choice for all of your charging needs. The fact that it has an integrated power supply as well as a 12 volt dc input means this charger can be used anywhere both in the car on the go and at home without the need for anything else. Many other chargers require a separate power supply for home use. . Not only does this charge, but it also measures charge current (overall mah), discharges, and reads internal resistance, making it a very good tool for monitoring the life of your batteries overtime and prolonging their lifespan. The discharge functionality is also useful on older nicd batteries which have a memory effect. . The charger seems to work good and automatically cut-off when charging is completed. The only issue i noticed was that the voltage is slightly off by 1/10th compared to my digital multi-meter. The charger said the battery voltage was 12. 8, but i measured 12. 9 with a multi-meter. I am not sure if this can be calibrated. . If you have a lot of things that take rechargeable batteries, then this is a must have!



Leave a Reply

You must be logged in to post a comment.


Top genuine 50watts professional balancing discharger Review Content

Related Products

  • On Sale
    Ticket To Ride India: Map Collection - Volume 2 (Days Of Wonder)

    Ticket To Ride India: Map Collection – Volume 2 (Days Of Wonder) 1118

    Show Details Ticket To Ride India: Map Collection - Volume 2 (Days Of Wonder), Ticket to ride india: map collection - volume 2 (flat river group) when you're looking for a brand that stands out from the rest look no further. with a passion for quality and creativity you can rest easy knowing the quality we manufacture. toys and gamesModest Ticket To Ride India: Map Collection - Volume 2 (Toys And Games) Dow720114
  • Very Cheap
    4m Crystal Mining Kit (3564)

    4m Crystal Mining Kit (3564) 4217

    Get Discount 4m Crystal Mining Kit (3564), Crystal Mining Explore The Wonders Of Geology The 4m Crystal Mining Kit. This Educational Kit Allows Young Mineral Hunters To Dig For Their Very Own Crystals, Using The Kit's Digging Tool To Unearth -4m Crystal Mining Kit
    1. Items: The Kit Includes A Plaster Rock With Eight (8) Individual Crystals, A Digging Tool, Drawstring Pouch For Storing Crystals, And More.
    2. Items: A Handy Magnifying Glass Lets Mineral Hunters Examine Their Treasures And Study Their Different Features.
    3. I bought this for my almost 5 year old for christmas. She was very excited about it. Since the weather is cold here we had to do this inside. I wish we could have done it outside because it was very messy. When i bought it i thought it would be a brick of coarse sand. It was actually more like plast... go to https://wujus.com/4m-3564-crystal-mining-kit-421700hgjjgi/#4m-3564-crystal-mining-kit
    For Sale 4m Crystal Mining Kit (Toys And Games) 3564
  • Half Price
    Paw Patrol Action Pack Pups 3pk Figure Set Marshall, Ryder, Chase (6024760)

    Paw Patrol Action Pack Pups 3pk Figure Set Marshall, Ryder, Chase (6024760) 4958

    See Offers Paw Patrol Action Pack Pups 3pk Figure Set Marshall, Ryder, Chase (6024760), Action Pack Pups 3pk Figure Set Marshall, Ryder, No Job Is Too Big And No Pup Is Too Small! Now You Can Reenact Rescue Scenes 2 Action Pack Pups And Ryder! All Of Your Favorite Paw Patrol Characters Are Ready To Save The Day As -Paw Patrol Action Pack Pups 3pk Figure Set Marshall, Ryder, Chase
    1. Feature: Press Each Action Pack Pup's Dog Tag For A Unique Transformation That Reveals Their Tools To Help Them On Their Adventures!.
    2. Feature: Look For More 3 Packs Featuring All Of Your Favorite, Transforming Pups!.
    3. Had to repurchase, because our old marshals leg broke off, interesting the legs no longer move, good for durability but no more funny blancilng moves https://wujus.com/paw-patrol-action-figure-marshall-49580u7ex4zc/#paw-patrol-action-figure-marshall
    Affordable Paw Patrol Action Pack Pups 3pk Figure Set Marshall, Ryder, Chase (Toys And Games) 6024760
  • On Sale
    Vtech Go Go Smart Wheels - Heavy Duty Vehicles 3-pack (80 205850)

    Vtech Go Go Smart Wheels – Heavy Duty Vehicles 3-pack (80 205850) 4422

    Bestsellers Vtech Go Go Smart Wheels - Heavy Duty Vehicles 3-pack (80 205850), Go go smart wheels - heavy duty vehicles with vtech's go! go! smart wheels, your child is a hero as they play and learn. perfectly sized for little hands, this feisty electronic play vehicle entertains your child a light-up -vtech go go smart wheels - heavy duty vehicles 3-pack
    • Advantage: Perfectly Sized For Little Hands. Teaches The Letter Of The Vehicle's Name, And More Through Pretend Play.
    • Advantage: Light-up Driver Button Activates Learning, Music And Sounds.
    • These are a great set of cars for my son. He likes the lights and sounds, and they work well with his airport set. They do have a switch to turn them off, but he already figured it out, so he doesn't get this toy if we need to be quiet. It's still good to know about the switch, because they tend to ... go to https://wujus.com/vtech-go-smart-wheels-vehicles-44220o2s40pc/#vtech-go-smart-wheels-vehicles
    Shopping Vtech Go Go Smart Wheels - Heavy Duty Vehicles 3-pack (Toys And Games)

Product Image Gallery

Top-genuine-50watts-professional-balancing-discharger-254617y2g4y2-Content