Lhi Quadcopter Copter Controller Propeller (lhi h250kit) 5150

Review for mm quadcopter race copter frame

Price was $109.99. This is a good quality kit and comes with everything you'll need to build a zmr250 style racer quadcopter. You'll need to supply your own battery, receiver, transmitter and you'll have to do some soldering, however. . Some folks report that the led switches on the pdb shorted their battery connection, but mine didn't and worked quite well. The only caveat is that the pdb is pretty basic; it doesn't include a bec or 5 or 12v step-downs, which shouldn't be a big deal since everything that attaches to it can use the battery voltage to run. . The kit also doesn't come with any nylon standoffs for mounting your pdb and flight controller centrally. Instructions on youtube videos tell you to wrap the pdb in electrical tape and zip tie it to the underside of the quad. The videos also instruct you to use double-sided foam tape to secure the flight controller to it's position inside the quad, but this can cause problems with dialing in your pid's so it's not recommended. . The only other issue i had with the kit was that one of my escs (they're loaded with simonk firmware, btw) was getting hot enough to melt the zip tie and secured it to the arm, and one of the motors had a short in its windings which burned it out. . Lhi was more than willing to work with me on replacing the defective parts. They sent me discount codes to purchase the items for 1 dollar from online store (totalling $2 for the 2 parts), and refunded me the $2, which worked for the most part. The only hitch was that the discount codes for the motor weren't working, so they ended up just issuing a refund for the price of the motor that went directly to my card and i just purchased another one from online store. It arrived within 2 days (with free prime shipping) and i was able to install it on my quad and fly it without issue. . All in all, i'd say the experience was worth the $110 i paid for the kit. I'm still flying the quad with the replacement parts i was sent and it's performing flawlessly. Just be prepared, with the price you pay for the parts, that some of them may be defective. . In the photo, you can see i've added some stuff: large zip ties with shrink tubing for the receiver antenna wires, kingkong 5040 propellers, a 600tvl cmos camera for slow fpv flights, 6mm m3 nylon spacers for the pdb and flight controller and a turnigy battery strap. The kit doesn't come with any of this, but it's stuff i had lying around from my workspace.

-B. Gladys

250 Mm Quadcopter Race Copter Frame Kit Arf+ Cc3d Flight Controller + Mt2204 2300kv Motor + Simonk 12a Esc + 5030 Lhi Full Carbon Fiber 250 Mm Quadcopter Race Frame Kit (assembled) Not New, But Very Cheap Https://www. Online Store. Com/dp/b016rpj9as The Tp250 Is A Mini Sized Multi-copter Measuring -Lhi 250 Mm Quadcopter Race Copter Frame Kit Arf+ Cc3d Flight Controller + Mt2204 2300kv Motor + Simonk 12a Esc + 5030 Propeller

  1. Highlight: It Is Specially Designed For The New Players And Also Perfectly Suitable For The Senior Player To Professional Diy.
  2. Highlight: This Kit Is A Very Popular Drone, It Has A Strong Rack, Beautiful Appearance, And A Stable Structure For Smooth Flight, It Is The Best Choice For Fly And Fpv.

Best Price Lhi Quadcopter Copter Controller Propeller (Toys And Games)

Buy Now

Prologue

Great kit, but bewarned, you might get pissed while trying to get it to fly correctly, as that is the hardest part for me. (going into openpilot and getting all the settings right and getting the drone to accept them) it was easy to assemble, but several key parts(in my opinion) were not included. First, there arent any bullet connectors included, so order some or make do with just soldering escs to motors. Second, there was a allen key in eack motor package (4 total) but they onlyfit the screws that mount the motors (make sure you use the correct length screws, theres 2 sizes and the long ones almost touch the motor windings) but there isnt one for the screws to assemble the frame. Also, there isnt a battery lead included so i had to rip a bannana connector and spare 7. 5v 2000mah battery from a spare syma x8hg just so i could power the quad to test it. (i know, definitly the wrong battery to use, but it was all i had untill i get mine in tomorrow) but after a few frustrating hours, my new quad was sitting happily in the air. Now i just need to find out how to turn down the gain( i think im using the right word, what im trying to say is it has too much tilt when you give any roll or pitch commands and wants to divebomb. ) but once i figure that out i should be good all in all, probably not what you want if you have never built a quad before in which case i would try a f450 style. Something with more room on the frame and bigger/more stable. Best mm quadcopter race copter frame | Lightinghobby-Toys And Games Review as-of ( Oct 2019 ) Highlight LHI 250 mm Quadcopter Race Copter Frame Kit ARF+ CC3D Flight Controller + MT2204 2300KV Motor + Simonk 12A ESC + 5030 propeller This is a diy 250 quadcopter kit, it is unassembled.. It is specially designed for the new players and also perfectly suitable for the senior player to professional diy. This kit is a very popular drone, it has a strong rack, beautiful appearance, and a stable structure for smooth flight, it is the best choice for fly and fpv.. Materials: 3k carbon fiber. If you want to challenge your assembly ability, just choose this one, you will be a great sense of accomplishment .

Lhi 250 mm quadcopter race copter frame kit arf+ cc3d flight controller + mt2204 2300kv motor + simonk 12a esc + 5030 propeller Review (lhi h250kit)

This is a very good beginner quad with lots of power and speed. The motors are unbranded but they are 2204 2300 kv motors and they are decent quality. One of the motors took much less throttle to start spinning than the other ones. Also, i had an issue with the motors that after 10-15 flights one of the motors had a winding that shorted to the other. So i would recommend possibly investing in some better ones. The esc's are ok. They seem to perform well and i haven't had any issues with them. The frame is very good and very robust. The kit doesn't come with a power lead so you will need to get one of those to connect to the power distribution board. Also check your pd board for shorts as some short out with the switches. Mine didn't so they may have fixed that issue. The cc3d flight controller works well but you will need to use librepilot since openpilot no longer exists. Librepilot isn't that hard to use and the vehicle configuration tool is very simple and gets you up flying pretty quickly. The props that mine came with are gemfan 5030 props which aren't bad props but they are pretty flexible so they aren't the greatest for high power stunts. I would recommend some polycarbonate props as replacements. Overall this is a very fun quad to fly around and to learn on. -U. Meghan

Lhi Quadcopter Copter Controller Propeller

  • Order: Toy
  • Brand: LHI
  • EAN: 0712407295667
  • Product Dimensions:
    Height:1.50 inches
    Length:4.25 inches
    Width:2.56 inches
  • Manufacturer: LightingHobby
  • Suggested Min-Age: 11
  • MPN: LHI-H250KIT
  • Quantity: 1
  • Part/Serial Number: LHI-H250KIT
  • Sub-Type: Toy
  • Category: TOYS AND GAMES
  • UPC: 712407295667

250 mm quadcopter race copter frame kit arf+ cc3d flight controller + mt2204 2300kv motor + simonk 12a esc + 5030 Toy, Lhi full carbon fiber 250 mm quadcopter race frame kit (assembled) not new, but very cheap https://www. online store. com/dp/b016rpj9as the tp250 is a mini sized multi-copter measuring a mere 250mm in wheelbase. other than a toy, this hobby grade mini quad features high performance power system and reliable flight controller. by choosing carbon fiber as its main frame, tp250 is both lightweight and strong. you could carry it easily for outdoor flying. and moreover, if you want to upgrade this quad to fpv class in the future, carbon fiber frame is more durable and lighter than glass fiber. equipped with power system. whether beginner or experienced pilot could find a suitable setting by adjusting cc3d flight control board. and also, a gift package is included inside. we believe you will find it very useful in your assembling. have fun now with this tp250 and welcome to hobby world! the kit includes: 1 x 250 mm v2 carbon frame kit 4 x mt2204 2300kv brushless motor 4 x simonk 12a esc 8 x 5030(cw+ccw) 2-blade propeller 1 x cc3d flight controller amp&protect case 1 x power board Lhi Quadcopter Copter Controller Propeller (-Lhi).

Lhi Quadcopter Copter Controller Propeller Toy

mm quadcopter race copter frame LHI 250 mm Quadcopter Race Copter Frame Kit ARF+ CC3D Flight Controller + MT2204 2300KV Motor + Simonk 12A ESC + 5030 propeller (Switch to Mobile/Desktop Version)

Came with everything listed except 1 bag was missing 4 motor screws and it didn't come with 15 bullet connectors as stated in the description. I had to solder everything. Other than that i have no complaints. The frame is of decent quality. No gift though.

Lhi 250 Mm Quadcopter Race Copter Frame Kit Arf+ Cc3d Flight Controller + Mt2204 2300kv Motor + Simonk 12a Esc + 5030 Propeller
Click to see NoticeLhi Quadcopter Copter Controller Propeller (lhi h250kit)"This was my first real diy quad and it all went together very easily. After setting it all up i did run into a problem with one motors and it was not spinning at all. After some trouble shooting i found that the esc was bad and i think it killed the motor in the process of me tinkering with it. I contacted lhi via email and they sent out replacement parts right away. They were great to work with and now that i got it in the air it s been great fun. I recommend using 4s packs. They have way more punch than the 3s. ( )"


Action Figures & Statues » Arts & Crafts » Baby & Toddler Toys » Building Toys » Dolls & Accessories » Dress Up & Pretend Play » Kids' Electronics » Games » Grown-Up Toys » Hobbies » Kids' Furniture, Décor & Storage » Learning & Education » Novelty & Gag Toys » Party Supplies » Puppets » Puzzles » Sports & Outdoor Play » Stuffed Animals & Plush Toys » Toy Remote Control & Play Vehicles » Tricycles, Scooters & Wagons » Video Games » Lhi Quadcopter Copter Controller Propeller (Toys And Games)


RioRand XT60 Drone Connectors 5 Pair

Already converted my radian glider to xt60. Now all my batteries and airplanes are xt60, so much more convenient! easy to solder. Don't forget the shrink tubing! also connected one of the male connectors to an 1157 (12v 2. 1 amp) automotive bulb to safely discharge my lipo batteries down to 11. 1 volts after flying for storage.

Made from high-temp nylon and gold plated bullet connectors, both included in the injection mold at the time when forming the connector. The xt60 ensures a solid high-amp connection, perfect for applications up to and beyond 65a constant. Xt60, designed by rcx to be more reliable and a better quality connection than deans t-connectors. These are not cheap copied xt60 plugs (abs). These original nylon xt60 plugs can handle over 60a current for extended periods without exceeding 80degc thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-nylon xt60 plugs.

RioRand XT60 Drone Connectors 5 PairRioRand-XT60-Drone-Connectors-Pair

Xt60 Drone Connectors 5 Pairs 5 Male 5 Female (Rcx Xt Connectors) FAQ.

These are good quality connectors. I use them on my fpv racer, camera drone, and other electrical projects that need to handle high current. Easily connect and disconnect, handle repeated soldering and desoldering, and don't crack easily. -Notice from L. Ruff, Massachusetts

Click to Show xt60 drone connectors 5 pairs 5 male 5 female (rcx xt connectors) Details

No complaints here. I got these because i was going to need some of the female ends for mounting into some 3d printed parts. Worked just fine. I ended up using the male ends to replace some overly tight connectors on some batteries. These aren't too tight like some i've used. Material feels better as well.

Xt60-drone-connectors-5-pairs-5-male-5-female-(rcx-xt-connectors) set picture

- Q. MahoodPretty good quality. They don't seem to be quite as high quality as the official ones that come pre-soldered to batteries, their a little stiffer and duller in color. But that is not necessarily a bad thing, they mate well and i haven't had a single problem so far. I'm assuming the stiffness/color difference is because they use nylon which should give better heat characteristics anyway. They held up pretty well to soldering, i wasn't particularly careful and didn't get any melting or deformation at all. . Would definitely recommend due to their low price.

Be sure to connect these into each other to make a bigger block when you solder cables on. This will act as a modest heat sink and keep the metal pieces in place, which you'll probably need since the plastic melts pretty easily. With the first one i worked on, the plastic softened to the point where the metal pin slid through, yielding the connector unusable. I'm relatively new to soldering though, so i'm not sure a different brand would fair much better. Either way, i got the hang of it pretty quick so you probably will too.

R. Lynette, Washington

RIORAND XT60 DRONE CONNECTORS 5 PAIR Review
Price :    $7.99
  • 65a constant current draw
  • Brand: riorand
  • Used in most drone applications
  • High current nylon bullet style connectors
Brand :    riorand
Model :    RR-5PC-XT-60
Quantity :    1
Order click here :    normally ships in 24 hours
Hobby :    Best Toys And Games (riorand product review) for RioRand XT60 Drone Connectors 5 Pair available as-of ( Oct 2019 )

HobbyKing Matek PDB-XT60 w/BEC 5V 12V

Matek pdb-xt60 w/bec (5v and 12v)this power distribution board has been engineered to provide the highest possible performance and reliability in a 36x50mm, 4 layer pcb. It comes with an xt60 for easy connection to lipoly batteries. Using becs it distributes power from 3 4s lipoly packs to 6 escs, as well as providing synchronized and regulated dc 5v outputs for rc receivers, flight controllers, osd, and servos. It also provides linear regulated dc 12v for powering cameras, servos, rc receiver, flight controllers, video transmitters, leds, etc. A great package to get your racing drones powered up and racing. Features: 2oz copper, 4-layers and 1. 6mm pcb built-in xt60 socket total 6 pairs esc solder tabs are fit for h or x type frame 5v and 12v output led indicators regulated 5v and 12v outputs short circuit tolerantspecs:input voltage range: 9 - 18v dc (3s-4s lipoly operation)output continuous current: 25ax4 or 15ax6output peak current (10 seconds/minute): 30ax4 or 20ax6bec 5v output: 5v/2a (max. 2. 5a 10s/minute)output ripple: 40mv (vin 16v, vout 5v 2a load)short-circuit tolerant: 5 seconds/minutebec 12v output (4s lipoly, 13 18v dc): 12v/500ma (max. 0. 8a 5s/minute) bec 12v output (3s lipoly): 3s lipoly voltage - 1vdimensions: 36 x 50 x 4 mm (without xt60)mounting: 30. 5 x 30. 5mm, 3mmweight: 7. 5g (w/o xt60), 11g (w/ xt60)

HobbyKing Matek PDB-XT60 w/BEC 5V 12VHobbyKing-Matek-PDB-XT60-BEC-12V

HOBBYKING MATEK PDB-XT60 W/BEC 5V 12V Reviews
Brand :    matek systems
Model :    090000026-0
Quantity :    1
Order click here :    normally ships in 24 hours
  • Total 6 pairs esc solder tabs are fit for h or x type frame
  • It distributes power from a lipo pack to 6 escs, as well as providing synchronised & regulated dc 5v outputs & linear regulated dc 12v for powering cameras, servos, rc receiver, flight controllers, video transmitters, leds, etc.
  • 5v & 12v output led indicators & short circuit tolerant
  • The pdb-xt60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers pcb.
  • Mounting hole suit for cc3d naze32 sp racing f3 fc
Price :    $7.28 (was $8.85)
Ce :    Best Consumer Electronics (matek systems product review) for HobbyKing Matek PDB-XT60 w/BEC 5V 12V available as-of ( Oct 2019 )

Floureon 2 Packs 3S 11.1V 1500mAh 35C RC Lipo Battery XT60 Plug RC Car, Skylark m4-fpv250, Mini Shredder 200, Qav250, Vortex, Drone FPV 2.91 x 1.46 x 1.08 Inch

I purchased the first set a few weeks back and they worked excellent so i had to buy a second set to match the existing ones in use. They come very well packaged in two protective boxes with foam and bubble wrap. Both boxes come with floureon battery straps which is a plus in my book! i broke all the other straps i had so thanks again for the freebies. . I now have a total of 8 batteries and 4 of them are from floureon. The other are from china direct and seem to be the same size, rating and it seems they even used the same materials. I have a feeling they were made in the same factory just re branded. These are super light so it makes the quad ultra responsive. Battery life with these on my 210 frame are around 5 minutes if you fly around safely. I'm scared to push my quad any faster because these batteries make it super fast already. . All cells came balanced at storage voltage reading 3. 8v on my multimeter. . I would recommend to anyone who needs some inexpensive but high quality batteries. I've drained them down to the point where quad died and it was reading 2. 9 volts per cell and charged them back up to full capacity with no problems.

Please notice: ❶for the rc battery, only if the voltage and the plug match, then it will fit. ❷please stop charging immediately when the cell voltage been charged to 4. 2v (normal cell voltage is between 3. 7v 4. 2v). ❸to double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using. ❹if the new battey won't hold a full charge or loss the charge very quickly in short time, please use balance charger to charge and recycle several times first. Specification: brand: floureon chemistry: li-polymer voltage: 11. 1v capacity: 1500mah discharge: 35c charge plug: jst-xh discharge plug: xt60 connector battery dimension: 74x37x27. 5mm/2. 91x1. 46x1. 08inch battery weight: 129g/0. 28lb color: red compatible for: rc hobby, rc car, rc buggy, rc truck, rc truggy, skylark m4-fpv250, mini shredder 200, indy250 plus mojo 280, qav250, vortex, emax nighthawk 250, drone, fpv, etc. (only if the voltage, dimension and the plug match, then it will fit). Package included: 2x floureon 3s 11. 1v 1500mah 35c rc lipo battery with xt60 plug

Floureon 2 Packs 3S 11.1V 1500mAh 35C RC Lipo Battery XT60 Plug RC Car, Skylark m4-fpv250, Mini Shredder 200, Qav250, Vortex, Drone FPV 2.91 x 1.46 x 1.08 InchFloureon-1500mAh-Battery-m4-fpv250-Shredder

Floureon 1500mah Battery M4 Fpv250 Shredder (107899101*2) FAQ.

One pack seems to be holding strong, has enough punch for my light 210mm build and last 8-9 min of lazy or 4-5 of aggressive flying. The other pack only flew one flight in my quad, hit lvc pretty early, and now one cell reads zero and won't take voltage. $25 for one battery isn't worth it. . Edit: seller (sevesto) replaced broken pack free of charge, no questions asked. This alone makes purchasing these batteries worth it! -Notice from Z. Lynette, South Dakota

Click to Show floureon 1500mah battery m4 fpv250 shredder (107899101*2) Details

These batteries work great on my 220 quad. My charger displays mah charged back into the batteries and they m have always charger at least the rated 1500mah without getting warm. Even under hard flying they haven't heated up. The straps they came with are a little weak, but they were more of a bonus for me so i can't complain. They have taken crashes with no adverse effects.

Floureon-1500mah-battery-m4-fpv250-shredder-(107899101*2) set picture

- O. JulieThe perfect lightweight battery for my qrp rigs requiring less than 12v for ops on the trail or in the park. Although the 4s lifepo's are fine for my kx3 or even larger rigs, the mtr and other very light radios i have aren't happy with more than 12v power. I clipped the connector on these and added anderson power poles in a couple minutes. Don't forget to have these in your carry on luggage only if you are flying and packing your equipment.

Already had a pair of these battery and they worked well so i got two more so i can spend more tine in the air. Got these and that battery are not the same as the first two. The new ones are larger then the old ones with much larger gauge wires. Haven't seen much in the way of better flight time but im happy and will buy two more if i need more.

P. Patricia, California

FLOUREON 2 PACKS 3S 11.1V 1500MAH 35C RC LIPO BATTERY XT60 PLUG RC CAR, SKYLARK M4-FPV250, MINI SHREDDER 200, QAV250, VORTEX, DRONE FPV 2.91 X 1.46 X 1.08 INCH Advantages
Price :    $24.99 (was $37.99)
  • Specification material: li-polymer; battery voltage: 11. 1v; cell: 3s; cell voltage: 3. 7 4. 2v; capacity: 1500mah; discharge: 35c; discharge plug: xt60 connector.
  • Voltage note please check whether the battery surface is alright when you get it and whether the voltage is between 3. 7 4. 2v before using.
  • Dimension 2. 91x1. 46x1. 08inch; net weight: 0. 28lb. all floureon products sold by sevesto are comply with rohs, ce standard.
  • What you get floureon 2 packs 3s 11. 1v 1500mah 35c with xt60 plug lipo battery with 1 year warranty and friendly customer service.
  • Application rc airplane, helicopter, car, truck, boat, drone, fpv, skylark m4-fpv250, mini shredder 200, indy250 plus mojo 280, qav250, vortex and emax nighthawk 250 (only if the voltage, dimension and the plug match, then it will fit).
Brand :    floureon
Size :    11.1V 1500mAh
Weight :    0.51 pounds
Model :    107899101*2
Quantity :    2
Order click here :    normally ships in 24 hours
Toy :    Best Toys And Games (floureon product review) for Floureon 2 Packs 3S 11.1V 1500mAh 35C RC Lipo Battery XT60 Plug RC Car, Skylark m4-fpv250, Mini Shredder 200, Qav250, Vortex, Drone FPV 2.91 x 1.46 x 1.08 Inch available as-of ( Oct 2019 )

Anbee FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain Aerial Set RP-SMA Female Plug

* greatly increases video and audio signal. * runs on 5. 8 ghz commonly used for fpv. * circularly polarized for reduced interference. * precision manufactured and 100% tested. * clover-leaf style antenna / omni-directional. * plug type: rp-sma plug for both receiver and transmitter. Package list: 1x 3-blades antenna for tx 1x 4-blades antenna for rx

Anbee FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain Aerial Set RP-SMA Female PlugAnbee-5-8Ghz-Circular-Polarized-Antenna

ANBEE FPV 5.8GHZ CIRCULAR POLARIZED CLOVER LEAF ANTENNA HIGH GAIN AERIAL SET RP-SMA FEMALE PLUG Featured
Brand :    anbee
Weight :    0.2 pounds
Model :    ANBEE-ATN-001
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Toys And Games (anbee product review) for Anbee FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain Aerial Set RP-SMA Female Plug available as-of ( Oct 2019 )
Price :    $8.98
  • Clover-leaf style antenna / omni-directional.
  • Anbee circularly polarized for reduced interference.
  • Rp-sma plug for both receiver and transmitter, straight plug for rx, right angle for tx
  • Precision manufactured and 100% tested.
  • Runs on 5. 8 ghz commonly use for fpv systems.

GoolRC Flysky FS-i6 AFHDS 2A 2.4GHz 6CH Radio System Transmitter RC Helicopter Glider FS-iA6 Receiver Mode 2

Works great and for the price

Transmitter specfications: channels: 6 model type: fixed-wing/glider/helicopter rf range: 2. 405-2. 475ghz bandwidth: 500khz band: 142 rf power: less than 20dbm 2. 4g system: afhds 2a and afhds code type: gfsk sensitivity: 1024 low voltage warning: less than 4. 2v dsc port: ps2; output: ppm charger port: no ant length: 26mm * 2(dual antenna) power: 6v 1. 5aa * 4 (not included) display mode: transflective stn positive type, 128 * 64 dot matrix va72 * 39mm, white backlight. Size:174 * 89 * 190mm weight: 392g online update: yes color: black receiver specifications: channels: 6 channels model type: airplane / glider / helicopter frequency range: 2. 4-2. 48ghz band width number: 140 transmitting power: not moer than 20dbm rx sensitivity: -105dbm 2. 4g system: afhds 2a code type: gfsk antenna length: 26mm input power: 4. 0-6. 5v dc dimension: 40 * 21 * 7mm weight: 6. 4g color: black i-bus interface: no

GoolRC Flysky FS-i6 AFHDS 2A 2.4GHz 6CH Radio System Transmitter RC Helicopter Glider FS-iA6 Receiver Mode 2GoolRC-Flysky-Transmitter-Helicopter-Receiver

Goolrc 2 4ghz Transmitter Helicopter Receiver (lysb00ve3pz3y toys) FAQ.

Great radio - it has a ton of options and helpful readouts when you're just getting started. It's a great value for the price! -Notice from U. Gilmore, Essex

Click to Show goolrc 2 4ghz transmitter helicopter receiver (lysb00ve3pz3y toys) Details

Came in yesterday. Radio felt "toy like" to me, but i was comparing it to mt fs-t6. I like the part about about using only 4aa's compared to 8 and i like the upgraded receivers i can get for it. I think i'll give it to my club to try out and get they're input on it. I also like the short stubby ant. And the gimbals. I might swap them out on my t6. Funny thing about these cheap as dirt radio's from flysky is, they don't loose contact, no receiver malfunction, just a solid bind ! i have watched others plane fall out of the skies using high dollar radio's while mine stayed in the air. My parkzone radian has flown 1500ft plus without any problem and as far as i could see it without any loose of response. I used to get laughed at, but it was me who laughed at them. My idea of flysky is simple; flysky rocks !

Goolrc-2-4ghz-transmitter-helicopter-receiver-(lysb00ve3pz3y-toys) set picture

- Q. KimberlyWorks good

Best bang for the buck you can get, receivers are large, but no complaints, good reception and response. Not very rubust but still a great value

M. Donna, Bexley

GOOLRC FLYSKY FS-I6 AFHDS 2A 2.4GHZ 6CH RADIO SYSTEM TRANSMITTER RC HELICOPTER GLIDER FS-IA6 RECEIVER MODE 2 Highlight
Brand :    goolrc
Weight :    0.88 pounds
Model :    3ZA1427703604116RM
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Hobbies (goolrc product review) for GoolRC Flysky FS-i6 AFHDS 2A 2.4GHz 6CH Radio System Transmitter RC Helicopter Glider FS-iA6 Receiver Mode 2 available as-of ( Oct 2019 )
Price :    $52.99 (was $54.99)
  • Reliable, interference free 2. 4ghz afhds 2a signal operation.
  • Quick and extremely stable in performance.
  • Simple binding procedure.
  • 6ch operation. use only 4 * aa batteries for transmitter.

RioRand RC Model Hop-ups C23212 LiPo Voltage Checker + Warning Buzzer

Top-quality materials & superb craftsmanship; preferred by knowledgeable model hobbists & r/c enthusiasts; lipo voltage checker with warning buzzer; push key which can change the voltage settings and save; when the voltage is below the set value, it will buzzer with red led light, pre-set value 3. 3v; .

RioRand RC Model Hop-ups C23212 LiPo Voltage Checker + Warning BuzzerRioRand-Hop-ups-C23212-Voltage-Checker

RIORAND RC MODEL HOP-UPS C23212 LIPO VOLTAGE CHECKER + WARNING BUZZER Benefits
Brand :    riorand
Color :    black
Size :    Full Size
Weight :    0.2 pounds
Model :    C23212
Quantity :    1
Order click here :    normally ships in 24 hours
Hobby :    Best Toys And Games (riorand product review) for RioRand RC Model Hop-ups C23212 LiPo Voltage Checker + Warning Buzzer available as-of ( Oct 2019 )
Price :    $5.07
  • Lipo voltage checker with warning buzzer
  • Top-quality materials & superb craftsmanship
  • Preferred by knowledgeable model hobbists & r/c enthusiasts

Turnigy 2200mAh 3S 20C Lipo Pack

Turnigy is one of the more reliable brands for lipos when you want bang for the buck. This battery pack has a lot of punch and consistent power output!

Turnigy batteries are known the world over for performance, reliability and price. Its no surprise to us that turnigy lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford. Turnigy batteries are equipped with heavy duty discharge leads to minimise resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and rc vehicles. Each pack is equipped with gold plated connectors and jst-xh style balance connectors. All turnigy lipoly batteries packs are assembled using ir matched cells. You wont find a better deal in lipoly batteries anywhere! spec. Minimum capacity: 2200mah (true 100% capacity)configuration: 3s1p / 11. 1v / 3cellconstant discharge: 20cpeak discharge (10sec): 30cpack weight: 188gpack size: 103 x 33 x 24mmcharge plug: jst-xhdischarge plug: xt60

Turnigy 2200mAh 3S 20C Lipo PackTurnigy-2200mAh-20C-Lipo-Pack

Turnigy 2200mah 3s 20c Lipo Pack (T2200.3S.20) FAQ.

I purchased this battery for my phantom fc40 and it works as expected. I bought it because my phantom battery wasn't working as it should be, and this battery seems to work better every time i fly so far. You don't get as much fly time as before, but you do get what you need. Over all, a decent battery that's ok for the price. -Notice from E. Wayt, Gloucestershire

Click to Show turnigy 2200mah 3s 20c lipo pack (t2200.3s.20) Details

I use these batteries in a electric line control airplane. I routinely pull 35 amps on these batteries operating at only full power (350-400 watts). So far they have performed flawlessly, with almost no voltage drop. These are a nice looking pack at a very affordable price.

Turnigy-2200mah-3s-20c-lipo-pack-(t2200.3s.20) set picture

- U. AlbertaWorks great, no issues after recharging it twice. I bought it for a modified nerf rival khaos gun to give it more juice. Of course you have to upgrade the wire and switches so that the battery won't melt them. After you do that your nerf gun will be a freaking monster!

Pretty good battery. I was hoping for more flight time. Out of this size battery. Probably better for a smaller drone. Other than that it is a decent battery.

B. Shawna, New Hampshire

TURNIGY 2200MAH 3S 20C LIPO PACK Pros
Price :    $29.99
  • Turnigy brand lithium polymer (lipo)
  • 3 cell (3s) 11. 1 volts
  • 2200mah
  • 20c constant discharge rate (30c burst discharge rate)
  • Connector plug: xt60 connector
Brand :    turnigy
Weight :    0.42 pounds
Model :    T2200.3S.20
Quantity :    1
Order click here :    normally ships in 1-2 business days
Toy :    Best Hobbies (turnigy product review) for Turnigy 2200mAh 3S 20C Lipo Pack available as-of ( Oct 2019 )

RAYCorp 5030 5x3 Maxi Pack of 32 Propellers 16 CW, 16 CCW Genuine 5-inch Quadcopter Multirotor Props + Battery Strap

Main characteristics diameter: 5 inches pitch: 3 shaft diameter : 5 mm weight: 1. 5 grams material : high quality abs plastic

RAYCorp 5030 5x3 Maxi Pack of 32 Propellers 16 CW, 16 CCW Genuine 5-inch Quadcopter Multirotor Props + Battery StrapRAYCorp -Propellers-Genuine-Quadcopter-Multirotor

RAYCORP 5030 5X3 MAXI PACK OF 32 PROPELLERS 16 CW, 16 CCW GENUINE 5-INCH QUADCOPTER MULTIROTOR PROPS + BATTERY STRAP Summary
Brand :    ray
Color :    black red
  • Pack of 32 propellers, 16 clockwise (cw) & 16 counter-clockwise (ccw) - color : red (16 props) & black (16 props)
  • Works well with the following motors : all 1806, 2204 & 2206 motors
  • Perfect for 250 sized fpv racers like : qav250, hk250, walkera 250, fpv250, blackouts & other multirotors, quadcopters and hexacopter.
  • 100% genuine & brand new. made with high quality abs plastic for maximum performance, durability and balance.
  • The 1 best selling and most used propeller for 250-sized quadocopters, hexacopters and fpv racers
Price :    $15.99
Model :    43227-2191
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Home (ray product review) for RAYCorp 5030 5x3 Maxi Pack of 32 Propellers 16 CW, 16 CCW Genuine 5-inch Quadcopter Multirotor Props + Battery Strap available as-of ( Oct 2019 )

lhi 250 mm quadcopter race copter frame kit arf+ cc3d flight controller + mt2204 2300kv motor + simonk 12a esc + 5030 propeller Price : 109.99, was : 0 as 2018-07-25
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Lhi Quadcopter Copter Controller Propeller (lhi h250kit) Reviewed by on wujus.com

Top lhi quadcopter copter controller propeller (lhi h250kit) Content

The F.A.Q. for lhi 250 mm quadcopter race copter frame kit arf+ cc3d flight controller + mt2204 2300kv motor + simonk 12a esc + 5030 propeller

Great deal for the parts. As advertised. Shipping error delayed things a bit, but seller worked to fix the problem. . Will be buying from again in the future!

A number of questions have been asked here.

Q&A

(0) Question: Besides the parts in the package what other parts do you need to buy to make it fly?


(1) Question: I'm a newbiee: how good is the flight controller? i see people recommend naze32, has anyone replaced the controller with naze32? thanks!


(2) Question: Does it come with a remote and receiver? if not what is one for a cheap price


(3) Question: I know not "geniune" but is the air frame a qav250 or zmr250 clone?


(4) Question: Does it works with the new dji goggles fpv racing edition?


(5) Question: Where can i find a manual for building this drone ?


(6) Question: Can an old style rc crystal type remote be used with/for this. aka, a robotics remote.



(note) Question: where/how to get Lhi (manufacturer's brand) accessories & similiar Lhi's products

Answer:

Click the marked text to copy link to Clipboard

Great quad kit. Requires some solder skills for sure. End product is crazy fast and unbelievably sturdy. My main quad is a dji so i have some experience with these. This thing is in a different league when it comes to speed and maneuverability, but it is designed to be a racer, not a caamera platform.


Bestsellers, Toys And GamesTop Lhi Quadcopter Copter Controller Propeller (lhi h250kit) FAQ Content

Best lhi quadcopter copter controller propeller (lhi h250kit) in review

First quad purchase. I say if you're going to get into it, give this one a shot. I was flying this thing within a few hours of actual effort put into assembly. I didn't even have my good batteries yet. I tossed 2 18650 cells in a holder and this thing flew real nice. . And i'm glad i "trained" so to speak on 8 volts, because when i got my 3s 2200mah batteries, i almost pooped a bit when i got it airborne. I hovered around a little too get a feel for it, checked my overhead clearance for trees, and floored it. . What ensued can only be compared to the damn thing being shot by a shrink ray. . I am not kidding you that this thing climbed straight up at over 40 miles per hour. . I might even be under guessing that. . I'm hooked, and the wife hates it. Invest in propellers, don't bother with carbon fiber until you're better at flying. I enjoy the 3-blade props, they make a different sound, but i think they drag a little harder on amperage.

I. Kelly, Liverpool

You might like to see Jurassic Bubble Gun Shooter Light Up Blower Toy Bubble Blaster Toddlers, Kids, Parties Led Flashing Lights, Extra Refill Bottle, Sound-free Complimentary Batteries Ready, Aim, And Fire A Barrage Of Bubbles! Let The Children Have Fun And Help Them Learn Something New At The Same Time! The Haktoys Jurassic Dinosaur Bubble Shooter Is A Smart And -Haktoys Jurassic Dinosaur Bubble Gun Shooter Light Up Blower Toy Bubble Blaster Toddlers, Kids, Parties Led Flashing Lights, Extra Refill Bottle, Sound-free Complimentary Batteries Included
  1. Details: Features Bright And Colorful Led Lights And A Compact, Easy-to-grip Handle With Easily Attachable Bubble Solution. Comes With Complimentary Batteries And An Extra Bubble Refill.
  2. Details: Encourages Active Play And Develops Hand-eye Coordination. Great For Parties, Weddings, Celebrations, Entertainment, And All Indoor/outdoor Activities.
Price Cut Haktoys Jurassic Sound Free Complimentary Batteries (Toys And Games) Haktoys Jurassic Sound Free Complimentary Batteries (fba
Or you might like to consider Garden wagon & tools toy set kids 8 gardening tools, 4 pots, water pail spray - great beach & sand fun in the sun garden wagon! an adorable colorful plastic garden wagon set that has everything your little kid needs for big time fun. carry all your garden toys in this large wagon! -garden wagon & tools toy set kids 8 gardening tools, 4 pots, water pail spray - great beach & sand too
  • Advantage: Perfect Beach Toy - We Designed These Toy Tools Set With Versatility And Practicality In Mind. You Can Take These Tools When You're Heading To A Long Holiday Beach And Build Sand Castles, Towers, Exciting Figures Of Animals And More.
  • Advantage: Set Includes - 8 Gardening Tools (3 Large And 5 Small) 4 Flower Pots Water Pail Water Spray Bottle And Wagon (measures 14" X 12" X 7". The Handle Of The Wagon Extends Up To 13".
Modest Garden Wagon Tools Gardening Water (Toys And Games) Garden Wagon Tools Gardening Water (Liberty

O. Widmer, Bury says

Received my kit quickly thanks to online store prime. Frame is great quality and power system is great but the props that were included in my kit broke during motor spin up before it ever got off the ground. I swapped out with a couple of the spares that were included and the balance was horrible, checked all remaining props that were included and balance was so bad i couldn't use them, tried to balance them but most were so far out i just threw them away. Luckily, props turned out to be the only thing i dislike about this kit but for the price ($110 with 2 day shipping) i can't complain. Props are cheap and i had plenty of spares so after getting good props on it (5045 gemfan) it flew great. The description of this item is incorrect, it shows a list of what is included but the motors are not sunnysky 1806, they are emax 2204 2300kv and it did not include the bullet connectors that was listed in the contents. I have no idea what the free gift was in the item description, i didn't receive anything extra.

Z. Jackson, Kansas

Just finished the build, managed to put camera and tx from eachine 250 on it. Awesome quad! wished i would have bought this kit before the eachine racer 250. Definitely gonna buy more diy kits especially this one for the price! if ur getting into the hobby i recommend starting with one of these kits instead of the pre-built models. They can be quite annoying finding the right parts, and are more expensive.

X. Gina, Wakefield says

This quad has an easy to assemble frame and decent component equipment for the price. I initially received a bad flight control board but customer service was quick to send out a replacement. Lots of online resources for quadcopter builds and several good videos on youtube so do some homework beforehand and your build should go pretty smoothly. I have already had a couple flights and after you get it setup properly it flies very well. I would definitely recommend this kit to anyone reading this. It's a great entry level quad racer. Remember you can always upgrade things as you like. Great service + good quality for the money happy flying!

R. Russell, New York

This appears to be a zmr250 clone. Everything was there and went together easily. I did have a little trouble with the firmware on the cc3d, ended having to use a friends firmware in rescue mode to get it to boot up. Flies great!

F. Guest, Derby says

Very nice quad, very sturdy frame and easy to assemble. All parts were packaged nice and secure. Had no problems setting up quad. Great quad for those beginning their first build.

N. Diana, Idaho

Great kit for the price. Probably not best kit for noobs. Very strong air frame, lasted through several violent crashes. Overall a great deal for the collection of parts you receive. Solid flight controller that's easily flashed with your custom parameters.

E. Bullock, Utah says

13 y/o son spent his hard earned work money on this as his first quad. . I helped him build. It was pretty straightforward when following the directions. . The frame is a quality carbon fiber unit that has withstood many hard crashes. The clip on landing feet are long gone. Don't care, don't need them. . The motors are knockoffs, but are strong enough for a learning pilot and above. Props were quickly replaced with dalprop 5040 tri. . Cc3d works very well. For those complaining it won't fly and flips over. You have rotated the cc3d. There is an arrow on it. It should be on top and facing the front of the quad. We have ours rotated for easier usb access and adjusted in setup for -90 yaw. . If he had purchased a cheaper one, i guarantee he would be bored or it would have broken beyond repair. Instead, he's having a blast and is learning how to solder and fix it himself. He is also planning upgraded motors and escs, as he is doing fpv and barrel rolls and flips. . Buy one and pair it with a flysky and have a blast! . . I did not receive any compensation for this review. Where do i sign up for that? :-)

A. Meghan, Michigan

Another excellent value from lighting hobby. This is my second kit from lighting hobby. Can't wait to finish building it. Will post again once the build is complete

X. Nancy, Georgia says

For all those blowing up speed controllers (escs) here's a simple tip from the cc3d manual itself. If you power the flight controller through the servo connectors (utilising the bec function of the speed controller), the positive power lead from only one esc is truly necessary. In most cases, all the wires can be left intact and plugged into the board without any problem. If you experience problems with setup or know for a fact that your particular esc model requires it, you may remove the positive and negative pins from all but one of the esc servo connectors. In some escs (very few, actually), connecting multiple voltage regulators (built in to the esc s) in parallel could cause problems. Also, in rare cases, connecting multiple ground wires could cause ground loops so remove the extra ground pins only if experiencing weird problems. Got my kit. Build my own pdb so no problems there, props did not break on spin up, like so many before me. There are gem fam props now! librepilot worked wonderfully, upgrade firmware on cc3d, follow vehicle setup wizard, follow transmitter setup wizard carefully if can be tricky! and import vehicle template for zmr250 closest to your setup for proper pid values. And mine was up and flying no problems at all except for instructions, just follow cc3d manual it's pretty easy.

Y. Monique, Solihull

Good kit. Motors are strong and has plenty of punch but do not use the provided props. 5040 3 blade props are cheap and provide excellent control. 12amp esc's are very stressed with 3s batteries. They will burst into flames. Upgrade these to 20amp esc's. Got mine form crazypony. Super small form and doesn't stress under 3s load. Cc3d controller is great but do mount 90 degrees to have easy access to usb port and make sure to change yaw orientation to 90 in control program. Overall an awesome kit. Complete this kit with a flysky i6 controller. Same functions as the more expensive transmitters but a fraction of the cost and great quality

V. Valdez, Alberta says

Although there were no instructions for assembly i was able to find several videos from youtube-university to follow. Everything came neatly packaged. I ended up making my own wiring harness instead of using the pdb and sandwiched that between the two bottom frame parts. Setting this up was a breeze in openpilot. I configured all for esc's at the same time through the cc3d to work at 22hz and setup the lipo cutoff to be 3. 2v instead of 3. 0v. . I also ordered gemfan props to use straight away as other reviews said how the ones that come in the box are no good. I will try them now that i have verified that it fly's well and see how they perform.

C. Elizabeth, Stockton-on-Tees

Update: the seller contacted me via e-mail about my problem with the cc3d controller, they were very nice enough to reimburse me the cost of the cc3d controller since that is the only item keeping me from flying my newly built quad. I've decided to give this product 4 stars because of the excellent customer service. . Previous review:. To start off, you need to be careful with the power distribution board because setting the led light switch to the on position will short out your battery leads. I removed that switch from the board. With that being said, this kit is not suitable for any beginners! i enjoyed putting this quad together, even though i did need to reference some you tube videos because it comes with no instructions. My horrible experience began dealing with the cc3d controller. I finally got some old software version of "libre pilot" to work with this junk. I was able to set up the vehicle wizard and transmitter, but i have not been able to make this quad fly off the ground. I've seen countless youtube videos of other users testing their quads by flying them with the default pid settings, and then go from their to start their adjustments. But, when i attempt to fly my newly built quad with the default pid settings, it does a horrible flip and lands straight on its back or side by just giving it some throttle! what's frustrating is that i've checked all possible solutions to correct this: i've made sure the motors spin the correct clock wise and counter clock wise directions, i've calibrated the level on a flat surface, calibrated the throttle, yaw pitch and aileron and made sure the channels are correct, made sure the motors operate to the corresponding channels and even ordered a new x4r (s-bus) receiver which is known to work on the cc3d controller. The receiver is properly connected to the s-bus port. I've attempted to make numerous adjustments to the rate stabilization for the proportional and integral to solve this problem, but it seems nothing has worked for me so far. And to make matters worse, this cc3d controller will not save under "advance configuration" settings for pid, it will only allow me to use the basic settings. I'll continue to mess with this but i am getting impatient since i purchased this cheap diy kit to practice my flying technique before i go fpv on my slightly more expensive drone (emax 280), which by the way, that one was able to fly easily off the ground with the default pid settings. I am hoping by the time i get to fly this quad off the ground, i will be an expert in calibrating the rate stabilization for the pids.



Leave a Reply

You must be logged in to post a comment.


Top mm quadcopter race copter frame Review Content

Related Products

  • See Offers
    Lego Technic 8293 Power Functions Motor Set (6176897)

    Lego Technic 8293 Power Functions Motor Set (6176897) 1234

    Get Discount Lego Technic 8293 Power Functions Motor Set (6176897), Lego Technic Power Functions Motor (Lego) Bring Your Lego Technic Models To Life The Exciting Power Functions Motor Set. This Supplementary Power Set Comes A Medium Motor, Battery Box, Switch And A Light Cable 2 Bright Toys And Games
    1. Value: Requires 6 Aa (1. 5v) Batteries, Not Included.
    2. This a great set to add motion and lights to your lego creations. It works well and the leds have a rectifier so they will light up regardless of whether you're in forward or reverse. I just wish it came with a few more gears. It came with some basic parts, including a u-joint, but it could have use... go to https://wujus.com/lego-technic-power-functions-motor-12341e78wlcu/#lego-technic-power-functions-motor
    3. Value: Switch (including Orange Switch) Measures Over 1" (3cm) Long And Under 1" (3cm) High And 1" (2cm) Wide, Switch And Cable Measures Over 9" (25cm) Long,.
    Inexpensive Lego Technic 8293 Power Functions Motor Set (Toys And Games) 6176897
  • See Reviews
    Radio Flyer Classic Red Dual Deck Tricycle (Toys And Games)

    Radio Flyer Classic Red Dual Deck Tricycle (Toys And Games) 1427

    Show Details Radio Flyer Classic Red Dual Deck Tricycle (Toys And Games), Radio Flyer Classic Dual Tricycle (Radio Flyer) 12", Classic Red Tricycle, Retro Styling, Sturdy Steel Construction , Steel Spoked Wheels Real Rubber Tires, Working Bell, Double Deck Rear Step, Easy Assembly, Body 31-5/8 X 24-1/2 Toys And Games
    1. This was easy to put together. Our son likes it so much we have to convince him not to ride it inside. The wheels are solid, not inflatable, which means that they can't puncture. This is convenient if you live in an area of the country where there are goatheads or other sharp things on the ground. T... go to https://wujus.com/radio-flyer-classic-dual-tricycle-14270004txm7/#radio-flyer-classic-dual-tricycle
    2. Add-on: Chrome Bell And Handle Tassels Are Fun And Stylish.
    3. Add-on: A Controlled Turning Radius And Low Center Of Gravity Make This Tricycle Easy For Little Ones To Ride.
    Cut-Price Radio Flyer Classic Red Dual Deck Tricycle (Toys And Games) 33
  • Low Price
    Wooden Train Track Super Deluxe (Right Track Toys)

    Wooden Train Track Super Deluxe (Right Track Toys) 5079

    More Info Wooden Train Track Super Deluxe (Right Track Toys), Wooden train track super deluxe set: 91 assorted pieces 100% compatible major brands including thomas wooden railway system - compare save - 100% tracks no right track toys makes you the conductor as you expand your train collection easily and cost-effectively. these premium wood train tracks are ready for you and your family's railroad -wooden train track super deluxe set: 91 assorted pieces 100% compatible major brands including thomas wooden railway system right track toys - compare save - 100% tracks no fillers
    • Very sturdy track pieces. Almost all of the pieces can be flipped over which makes the possibilities for track design so much more diverse. The piece that has 2 rr crossings got broken within minutes of coming out of the box, they are super flimsy. Every once in awhile we will have difficulty gettin... go to https://wujus.com/wooden-train-track-super-deluxe-50790ae8fgwu/#wooden-train-track-super-deluxe
    • Characteristic: Work With All Major Brands Of Trains And Track.
    • Characteristic: Super Deluxe Set Comes With Premium Unique Pieces Not Found In Other Sets.
    Bargain Wooden Train Track Super Deluxe (Toys And Games)
  • See Reviews
    Official Nerf N-strike Elite Series Tactical Vest (A0250F01)

    Official Nerf N-strike Elite Series Tactical Vest (A0250F01) 619

    Low Price Official Nerf N-strike Elite Series Tactical Vest (A0250F01), Official Nerf N Strike Elite Tactical (Nerf) Load Up Big-time For Any N-strike Elite Mission The Tactical Vest Kit! The Kit's Tactical Vest, Included Ammo And Quick Reload Clips Let You Stay Heavily Armed Even While You're On Toys And Games
    1. Attributes: Vest Features Storage Pockets For An Extra Blaster And For Extra Quick Reload Clips.
    2. This vest is great for the nerf warrior in your life. It has great capacity on indiviual rounds and magazines. It looks cool and the construction is excellent. I would note that my son is only 6 years old and the vest is a bit big on him so for smaller children it may be too big but im certain that ... go to https://wujus.com/official-nerf-n-strike-elite-tactical-619085k1oh0/#official-nerf-n-strike-elite-tactical
    3. Attributes: Darts Are Compatible With Nerf Elite Blasters And Most Original N-strike Blasters (sold Separately).
    Bargain Official Nerf N-strike Elite Series Tactical Vest (Toys And Games) A0250f01

Product Image Gallery

Top-lhi-quadcopter-copter-controller-propeller-515010fmgus8-Content