Paraboard – Parallel Charging Board Lipos Xt60 Connectors (Common Sense Rc) 2543

Review for paraboard parallel charging board connectors

Price was $24.99. Works very well to charge multiple same capacity lipo batteries. I only really use this at around 12amps, and it performs just fine.

-D. Adrienne

Paraboard Parallel Charging Board Connectors (Common Sense Rc) This Paraboard Lets You Charge And Balance Up To Six Lipo Batteries At Once! This Board Features Xt60 Plugs For Your Batteries’ Main Leads And Jst-xh Balance Plugs Ranging From 2s Hobbies

  1. Supplementary: This Paraboard Lets You Charge And Balance Up To Six Lipo Batteries At Once!.
  2. Supplementary: Features Xt-60 For Your Batteries’ Main Leads And Jst-xh Balance Plugs Ranging From 2s To 6s.

Competitive Paraboard – Parallel Charging Board Lipos Xt60 Connectors (Hobbies)

Buy Now

Preface

Excellent seller , the board is very well done and works properly. It came well packed and with full introduction manual. I recommend Best Paraboard - Parallel Charging Board for Lipos with XT60 Connectors as-of ( Jul 2020 ) | Common Sense Rc-Hobbies Review Supplementary Paraboard - Parallel Charging Board for Lipos with XT60 Connectors Don't spend all day charging your batteries one at a time!. This paraboard lets you charge and balance up to six lipo batteries at once!. Features xt-60 for your batteries' main leads and jst-xh balance plugs ranging from 2s to 6s.. Plugs right into most popular models of 6s lipo balancing chargers that have 7-pin balance ports with 2. 5mm pin spacing. A great choice for dji phantom owners .

Paraboard - Parallel Charging Board for Lipos with XT60 Connectors Review (PRBRD-XT60)

Great charging board. As with any parallel charging board, be very careful when connecting the balance plug. If you're not paying attention, it is possible to start to plug it in correctly and for a split second, the +'s and -'s touch and you'll get a spark and probably a burnt connector. This is more the fault of the charging plug design than anything else. Just be careful. I also wanted to add that the only negative reviews that i saw for this were from dji phantom owners who were crying because it wouldn't work with their dji factory charger. A quick google search or a little common sense would have helped them avoid this issue, but it's easier to leave a bad product review when you make a dumb purchase that's 100% your fault. -N. Bullock

Paraboard - Parallel Charging Board Lipos Xt60 Connectors

Rank
Toy
Brand
Common Sense RC
EAN
0696734299508
Product Dimensions
Height:1.00 inches
Length:6.50 inches
Weight:0.35 pounds
Width:3.60 inches
Manufacturer
Common Sense RC
Suggested Min-Age
168
MPN
PRBRD-XT60
Quantity
1
Part/Serial Number
PRBRD-XT60
Group-Order
Toy
Category
HOBBIES
Product-Name
Paraboard - Parallel Charging Board For Lipos With XT60 Connectors
UPC
696734299508

Toy(696734299508:Hobbies), Paraboard - Parallel Charging Board Lipos Xt60 Connectors (0696734299508:Common Sense Rc), This paraboard lets you charge and balance up to six lipo batteries at once! this board features xt60 plugs for your batteries' main leads and jst-xh balance plugs ranging from 2s to 6s. they plug right into most popular models of 6s lipo balancing chargers that have 7-pin balance ports with 2. 5mm pin spacing..

Paraboard Parallel Charging Board Connectors Toy

Paraboard Parallel Charging Board ConnectorsParaboard - Parallel Charging Board for Lipos with XT60 Connectors (Switch to Mobile/Desktop Version)

Great product

Paraboard - Parallel Charging Board Lipos Xt60 Connectors (Hobbies)
Click to see NoticeParaboard - Parallel Charging Board Lipos Xt60 Connectors (Common Sense Rc)"Awesomely perfect."


Action & Toy Figures » Die-Cast & Toy Vehicles » Games » Novelty & Gag Toys » Puzzles » Executive Desk Toys » Paraboard - Parallel Charging Board Lipos Xt60 Connectors (Hobbies)


Lumenier LUM-1300-4-60 1300mAh 4s 60c Lipo Battery

Lumenier lx series of lipo batteries provide you maximum performance for your multi-rotor air-frames and planes. This lipo's 60 "c" with 120 "c" burst rating is designed for multi-rotor or plane applications where extreme power is needed. This lumenier lipo maximizes flight time with minimal voltage sag. The all black battery design with the lumenier brand will look great on any air-frame! this 1300mah 4s battery is perfect to power small crafts that require a compact battery, but need high amperage that the xt60 connector can provide.

Lumenier LUM-1300-4-60 1300mAh 4s 60c Lipo BatteryLumenier-LUM-1300-4-60-1300mAh-Lipo-Battery

LUMENIER LUM-1300-4-60 1300MAH 4S 60C LIPO BATTERY Pros
Brand :    lumenier
Weight :    0.30 pounds
  • The dimensions are sized to easily fit in all of lumenier's air-frames including the qav250. this is our recommended battery for any 250 sized mini quad running on 4s
  • Each battery comes with a black vinyl cap to protect the xt-60 discharge adapter during transport and from the elements. we also use the vinyl cap to indicate a fully charged battery at the field
  • Length: 70mm. width: 34mm. height: 32mm. weight: 153g. c-rating: 60c - burst 120c connector: xt60
Model :    LUM-1300-4-60
Quantity :    1
Order click here :    normally ships in 1 to 2 months
Wireless :    Best Two Way Radio (lumenier product review) for Lumenier LUM-1300-4-60 1300mAh 4s 60c Lipo Battery available as-of ( Jul 2020 )

Fat Shark 1800mAh High Capacity Headset Battery With LED Power Indicator - FSV1803

Fat shark 7. 4v 1. 8a headset battery pack with led indicator is a high capacity battery for long flight days. The led indicator allows you to easily check remaining pack life before taking off. - please note: this battery only has 2 wires connected to the balance connector. This was done to ensure the batteries are charged via the discharge lead only. The balance leads only purpose is to power a fan plate. They are not meant to be balance charged. There is internal circuitry so the batteries are to be charged using the "lipo charge" setting on your charger, not the "lipo balance" setting.

Fat Shark 1800mAh High Capacity Headset Battery With LED Power Indicator - FSV1803Fat-Shark-1800mAh-Capacity-Indicator

FAT SHARK 1800MAH HIGH CAPACITY HEADSET BATTERY WITH LED POWER INDICATOR - FSV1803 Review
Brand :    fat shark
Weight :    0.10 pounds
  • High capacity for long flight sessions
  • Led indicator show remaining voltage
  • Extra lead for powering headset fat plate
Model :    FSV1803
Quantity :    1
Order click here :    normally ships in 1-2 business days
Hobby :    Best Toys And Games (fat shark product review) for Fat Shark 1800mAh High Capacity Headset Battery With LED Power Indicator - FSV1803 available as-of ( Jul 2020 )

ImmersionRC SpiroNet RHCP Mini Patch 8dBi IRLSNRHPATCH8

This is the spironet rhcp mini patch 8dbi by immersionrc.

ImmersionRC SpiroNet RHCP Mini Patch 8dBi IRLSNRHPATCH8ImmersionRC-SpiroNet-RHCP-Patch-IRLSNRHPATCH8

IMMERSIONRC SPIRONET RHCP MINI PATCH 8DBI IRLSNRHPATCH8 Review
Brand :    immersionrc
Model :    IRLSNRHPATCH8
Quantity :    1
Order click here :    -
Toy :    Best Hobbies (immersionrc product review) for ImmersionRC SpiroNet RHCP Mini Patch 8dBi IRLSNRHPATCH8 available as-of ( Jul 2020 )

Crazepony FPV Micro AIO Camera 5.8G 40CH 25mW Transmitter Y Splitter FPV Drone like Blade Inductrix etc

Specification output power: 25mw supply voltage: 2. 9-5. 5v size : 47 * 14. 8 * 12. 5 mm weight: 3. 6g antenna:exclusive dipole whip antenna power consumption: 200 215ma5v dcin frequency: 5. 8ghz 5 bands 40 channels, with raceband: 5362 5945mhz field of view: 120º operating temperature: -10 +60 ambient temperature:25 channel sel:touch switch channel indicate:ch1 ch8 channel indication with 8leds and a f frequency, group indicate with 6leds modulation type fm transmit power: 13 1dbm frequency control: pll all harmonic: max -50dbm frequency stability: 100khz (typ. ) frequency precision: 200khz (typ. ) channel carrier error: 1db antenna port: 50 Ω sensor:pal: 720x540/ntsc:640x480 1/4" lens angel: h:120 /v:100 base-band interface: (p1. 27*2) profile dimension: 14. 5mm*12. 2mm+14. 5mm*12mm transmission frequency a:ch1:5740mhz ch2:5760mhz ch3:5780mhz ch4:5800mhz ch5:5820mhz ch6:5840mhz ch7:5860mhz ch8:5880mhz b :ch1:5705mhz ch2:5685mhz ch3:5665mhz ch4:5645mhz ch5:5885mhz ch6:5905mhz ch7:5925mhz ch8:5945mhz c :ch1:5865mhz ch2:5845mhz ch3:5825mhz ch4:5805mhz ch5:5785mhz ch6:5765mhz ch7:5745mhz ch8:5725mhz d: ch1:5658mhz ch2:5695mhz ch3:5732mhz ch4:5769mhz ch5:5806mhz ch6:5843mhz ch7:5880mhz ch8:5917mhz e:ch1:5733mhz ch2:5752mhz ch3:5771mhz ch4:5790mhz ch5:5809mhz ch6:5828mhz ch7:5847mhz ch8:5866mhz f :ch1:5362mhz ch2:5399mhz ch3:5436mhz ch4:5473mhz ch5:5510mhz ch6:5547mhz ch7:5584mhz ch8:5621mhz package including 1 * fpv micro aio camera 1 * micro jst 1. 25 to 2 pin wafer cable 1 * vacuum plastic camera mount

Crazepony FPV Micro AIO Camera 5.8G 40CH 25mW Transmitter Y Splitter FPV Drone like Blade Inductrix etcCrazepony-Camera-Transmitter-Splitter-Inductrix

CRAZEPONY FPV MICRO AIO CAMERA 5.8G 40CH 25MW TRANSMITTER Y SPLITTER FPV DRONE LIKE BLADE INDUCTRIX ETC Overview
Brand :    crazepony
Weight :    0.1 pounds
Model :    VQP1405137UEHR388
Quantity :    1
Order click here :    normally ships in 24 hours
Photography :    Best Surveilance Systems (crazepony product review) for Crazepony FPV Micro AIO Camera 5.8G 40CH 25mW Transmitter Y Splitter FPV Drone like Blade Inductrix etc available as-of ( Jul 2020 )
  • Wide lens angle. miniature and light weight design
  • 8led display channel and 6leds display frequency group information, 1led display pal/ntsc and flip information.
  • Fpv micro aio camera 5. 8g 40ch 25mw transmitter with micro jst 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop blade inductrix .
  • Supporting touch switch select channel frequency group, supporting ntsc/pal switch, support vertical inverted image switch.
  • Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm.

Inductrix FPV BNF

When jesse perkins first flew the inductrix quadcopter, he knew that there was more to the experience yet to be unlocked. He mounted a small fpv camera and video transmitter, upgraded the motors, found a better battery and called it the tiny whooptm. Soon, thousands of inductrix owners were flying in places they never thought possible! the new inductrix fpv provides the freedom of flight in a fully ready-to-fly package as well as an fpv ready bind-n-fly version. No soldering or 3d printing required! enjoy a world you never knew existed when you are in the pilot's seat of the inductrix fpv! the inductrix fpv from blade builds on the wildly popular platform and transforms it into an incredible fpv machine right out of the box. With its integrated 25mw video transmitter, fpv camera, high performance motors and large 200mah battery, the inductrix fpv is capable of flying in the smallest of places with ease. Enjoy the view as safe technology makes flying simple and while the ducted propeller design allows you to bounce of walls and objects without crashing! tthe inductrix fpv comes out of the box with everything installed on the aircraft itself. All you need to get is a fpv monitor to completes the entire fpv experience! if you are looking for that immersive goggle experience, the headset adaptor can be purchased separately as well! engineered with safetm technology safe (sensor assisted flight envelope) technology is a revolutionary electronic flight envelope protection system. This technology allows anyone to pick up the transmitter, put on the goggles and be successful flying fpv for the very first time. Its newly improved stability mode allows for fast forward flight with the added weight of the fpv system. It prevents over controlling the aircraft and gives a confident feeling when maneuvering through tight spaces. The agility mode has also been tuned for the high output motors and weight of the fpv system on board

Inductrix FPV BNFBlade-BLH8580-Inductrix-FPV-BNF

INDUCTRIX FPV BNF Featured
Brand :    blade
Weight :    0.20 pounds
Model :    BLH8580
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Hobbies (blade product review) for Inductrix FPV BNF available as-of ( Jul 2020 )

NIDICI 50pcs FPV M3 Sponge Mat Landing Skid Pad Gear Anti-vibration QAV-R 220 QAV-X QAV ZMR 130/180/210/214/250 Frame Quadcopter

These are great! but they are much bigger then i thought, but will still work for what i need.

100% brand new 3m shockproof mounting pads for from 180 to 300mm mini multi-rotor quadcopter just like :diy mini zmr180 qav210 qav-r 220 qav250 zmr250 etcs fpv racing quadcopter feature: 1, super light 2, strengthen shockproof 3, better than aluminum column 4, anti-static 5, 10mm thickness include 50pcs not included:frame and other accessories note:iflight ix5 200mm racing drone is new and good style product . (not include), fit for fpv racing game very well please check follow listing:

NIDICI 50pcs FPV M3 Sponge Mat Landing Skid Pad Gear Anti-vibration QAV-R 220 QAV-X QAV ZMR 130/180/210/214/250 Frame QuadcopterNIDICI-Sponge-Landing-Anti-vibration-Quadcopter

See Nidici Sponge Landing Anti Vibration Quadcopter (Toys And Games) FAQ.

Work great. I used an exacto knife to cut a couple up and make feet for my little micro quad, too. -Notice from H. Meredith, Rhode Island

Click to Show nidici sponge landing anti vibration quadcopter (toys and games) Details

Good adhesion and you can use a sharp knife/blade to cut it and use it for other purposes.

Nidici-sponge-landing-anti-vibration-quadcopter-(toys-and-games) set picture

- N. PaigeFantastic deal for these since i've torn off my fair share of these. Any quad with arms that are the same height as the bottom of the body should absolutely have these. 1g for 4.

These pads are great and do a great job of protecting the bottom of my fpv quad.

D. Whiteman, Hammersmith and Fulham

NIDICI 50PCS FPV M3 SPONGE MAT LANDING SKID PAD GEAR ANTI-VIBRATION QAV-R 220 QAV-X QAV ZMR 130/180/210/214/250 FRAME QUADCOPTER Advantage
Brand :    nidici
  • My email: akigogogo hotmail. just contact me when you need more!
  • Super light, strengthen shockproof , anti-static
  • Better than aluminum column
  • We appreciate your good review when you like it :)
Model :    NA
Quantity :    1
Order click here :    normally ships in 1-2 business days
Toy :    Best Toys And Games (nidici product review) for NIDICI 50pcs FPV M3 Sponge Mat Landing Skid Pad Gear Anti-vibration QAV-R 220 QAV-X QAV ZMR 130/180/210/214/250 Frame Quadcopter available as-of ( Jul 2020 )

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

In the mini drones you're going to need to use a lot of batteries because it sucks the battery down fast and this is a good board for charging multiple batteries. It's simple plug-in positive negative pop your batteries right onto the board itself and you're good to go as i said if you're flying the mini drones you're going through batteries because he only worked about 2 to 3 minutes and if you're like me you have 8 or 10 of those batteries 12 of them and you need to charge them all the time this is a great unit

Lipo battery charging board 1s ultra microandamp; jst-ph parallel connect plate for blade inductrix, glimpse, mcp x, nano qx 3d, nano cp x, nano qx etc specifications: input charge connector: male 4mm banana plug output connector: 6x ultra micro; 6x jst-ph wire type: 18 awg silicone charge lead max charge rating: 1. 5a per battery fuse rating: 1. 5a dimension: 100x62. 5x25mm weight: 17g built-in fuses for safe charging package including 1 * 1s lipo battery charging board

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPXCrazepony-Battery-Charging-Inductrix-Parallel

See Crazepony Battery Charging Inductrix Parallel (I173540MK5WV281) FAQ.

Great add on for my charger. I'm happy with the product, wish it would have came in the 2 days. Oh well there's always next weekend to fly. -Notice from P. Bertie, Wokingham

Click to Show crazepony battery charging inductrix parallel (i173540mk5wv281) Details

Well made, works great, no problems. Make sure you receive version 2, it's connectors are stronger.

Crazepony-battery-charging-inductrix-parallel-(i173540mk5wv281) set picture

- Q. AprilSeems to work as described. I wish there were some instructions that came with it or even on the website for crazepony. I found videos and pages describing how to use. I found mixed answers to if i could charge my 150 and 220 at the same time so charging separately.

This is exactly what i was looking for to charge multiple tiny whoop batteries (molex 1. 25 connectors). You can parallel charge 6 at a time. Always pay close attention when parallel charging, it is not the safest way to charge and can cause the batteries to get damaged or blow up. This is true with all parallel charging though. I haven't had issues with this yet though and many, many people parallel charge and never have problems. I would definitely recommend this to a person looking to charge multiple tiny whoop batteries at once.

L. Debra, Illinois

CRAZEPONY 1S LIPO BATTERY CHARGING BOARD BLADE INDUCTRIX ULTRA MICRO JST-PH PARALLEL CONNECT PLATE MCX MCPX Review
Brand :    crazepony
Size :    Small
Weight :    0.4 pounds
Model :    I173540MK5WV281
Order click here :    normally ships in 1-2 business days
Toy :    Best Toys And Games (crazepony product review) for Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX available as-of ( Jul 2020 )
  • Dimension: 100x62. 5x25mm, weight: 17g(0. 6ounces)
  • Suitable for blade inductrix, glimpse, mcp x, nano qx 3d, nano cp x, nano qx etc
  • Charge 6 batteries at the same time, keep your tiny whoop staying in the air
  • Output connector: 6x ultra micro; 6x jst-ph
  • Input charge connector: male 4mm banana plug

Vicdozia 2.5mm Replacement 170 Degree Wide Angle Camera DV Lens Gopro HD Hero 1 2 SJCAM SJ4000 HS1177 FPV Runcam Swift Camera

Vicdozia 2. 5mm replacement wide angle camera lens 170 m12 lens for gopro hero1 hero2 hero3 sj4000 hs1177 fpv runcam swift rc racing quadcopter drones, suptig cameras. Great replacement for your damaged, cracked, marked or dirty lens! specifications: viewing angle: 170 ; focal length: f2. 65 mm; aperture range: 2. 8. Sensor size: 1/2. 5" thread size: 12mm*0. 5 material: hard glass + tough metal compatible with: gopro hero, hero 2, hero 3, sjcam sj4000 sj5000 series, hs1177 runcam swift flight fpv quadcopter racing drones etc. Please note, this lens not fit for gopro hero 3+(plus)/ hero 4/ hero 5. Package include: 1 x wide angle lens replacement 1 x lens cover 1 x base holder warranty: 1. The product was fulfilled by online store, you will receive it faster. 2. If you have any questions or requests, please feel free to contact us, we will answer you within 24 hours. 3. 1 year quality assurance by vicdozia.

Vicdozia 2.5mm Replacement 170 Degree Wide Angle Camera DV Lens Gopro HD Hero 1 2 SJCAM SJ4000 HS1177 FPV Runcam Swift CameraVicdozia-Replacement-Degree-Camera-SJ4000

VICDOZIA 2.5MM REPLACEMENT 170 DEGREE WIDE ANGLE CAMERA DV LENS GOPRO HD HERO 1 2 SJCAM SJ4000 HS1177 FPV RUNCAM SWIFT CAMERA Review
  • This lens is with high quality hard glass and tough metal. it allows more of the scene to be included in the photograph and performs well during the day.
  • Size: 1/2. 5"; viewing angle: 170 ; focal length: f2. 65 mm; aperture range: 2. 8.
  • 2. 5mm replaceable ultra-wide angle/m12 thread interface camera lens.
  • Package include: wide angle lens x1; lens cover x1; base holder x1.
  • Compatible with gopro hero, hero2, hero3, sjcam sj4000 sj5000 series, hs1177 runcam swift flight fpv quadcopter racing drones cameras etc. please note, this lens not fit for gopro hero 3+(plus)/ hero 4/ hero 5.
Brand :    vicdozia
Weight :    0.3 pounds
Model :    0012
Quantity :    1
Order click here :    normally ships in 24 hours
Photography :    Best Camera Other Accessories (vicdozia product review) for Vicdozia 2.5mm Replacement 170 Degree Wide Angle Camera DV Lens Gopro HD Hero 1 2 SJCAM SJ4000 HS1177 FPV Runcam Swift Camera available as-of ( Jul 2020 )

Frsky 3/16CH X Series Dual-way Receiver X4RSB w/Smart Port SBUS

Great receiver for a great value. I have a taranis x9d plus, and all my quads and airplanes run this. Works perfectly any time, and hasn't failsafed on me yet. Antennas are a little long, but take a straw and you can secure them almost anywhere you want. Built in telemetry also tells you battery voltage, which is what use to tell me when to land.

Brand name: frsky item name: frsky x4rsb 3/16ch telemetry receiver dimension: 40*22. 5*6mm (l x w x h) weight: 5. 8g operating range: full range ( 1. 5km) operating voltage range: 4. 0 10v operating current: 100ma 5v number of channels: 3/16ch (1 3ch from conventional channeloutputs, 1 16ch from sbus channel compatibility: frsky x-series module (xjt etc. ) taranis x9d in d16 mode(x4rsb is not work with d-series module)

Frsky 3/16CH X Series Dual-way Receiver X4RSB w/Smart Port SBUSFrsky-Dual-way-Receiver-X4RSB-Smart

See Frsky 3/16ch X Series Dual-way Receiver X4rsb W/smart Port Sbus (LYSB00VM1XWB0-TOYS) FAQ.

This is a great receiver for my 230 quadcopter. I have it bound to my taranis plus using sbus. Very easy to set up 3 wires, that's it . I also love the smart port, i have it set using telemetry. Also very easy. The size is pretty small so it is easy to arrange on a quad, even a mini. Quality is good and the item came fast and we'll packaged. I recommend this receiver to anyone looking for a nice receiver that's easy to set up and that wants to run sbus. Thanks -Notice from O. Paige, Warwickshire

Click to Show frsky 3/16ch x series dual-way receiver x4rsb w/smart port sbus (lysb00vm1xwb0-toys) Details

Another wonderful purchase from this seller. Received the receiver on time and in new condition. These for me are the best for my 155 and 250 class fpv quads. They are small, light weight, and reliable. I use the smart port for telemetry info and run them in sbus. I love the built in failsafe in case the other decides to fail. Which ive had happen running a naze32 rev 6 and an orangerx 710. Fly aways are no fun. I recommend this for anyone running a frsky tx and need a small diversity receiver on their craft.

Frsky-3/16ch-x-series-dual-way-receiver-x4rsb-w/smart-port-sbus-(lysb00vm1xwb0-toys) set picture

- H. JulianaS-bus is the only way to go (at least until the next leap it technology :). 16 channels, faster loop time, great range. Have this installed on my fist fpv quad build, a 210mm. Working great, have telemetry, etc working with my taranis x9e. Only suggestion is to shrink wrap the antennas with zip tie or straw (to stiffen) before installing though holes in carbon fiber. Also suggest rounding off sharp edges of holes in carbon fiber (be safe with this though, carbon dust. ). If you don't protect your antennas from the sharp edges of carbon fiber it will cut through the outer jacket, it will short on the carbon fiber and you will lose all connection to your 'copter. Just a quick tip.

I read a few reviews and this rx seemed like the way to go with my setup. However, since they are made in china the quality of this 1 i received out of a thousand others, the antenna broke right off the board after a semi-rough landing. Thought they were a little more durable. This may only be me and a handful others but, i bought another and will try it again. Overall good product.

D. Anonymous, Newham

FRSKY 3/16CH X SERIES DUAL-WAY RECEIVER X4RSB W/SMART PORT SBUS Review
Brand :    frsky
Weight :    0.2 pounds
  • Sb port is compatible with futaba s. bus servos and frsky sbus&cppm compatible servo
  • Rssi (pwm) output
  • Lighter weight and physically smaller than d8r-ii & d6fr
  • External analog telemetry port (ad2)
  • Two selectable failsafe setting options - native failsafe or user programmable failsafe
Model :    LYSB00VM1XWB0-TOYS
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Toys And Games (frsky product review) for Frsky 3/16CH X Series Dual-way Receiver X4RSB w/Smart Port SBUS available as-of ( Jul 2020 )

Tattu LiPo Battery Pack 1300mAh 75C 4S 14.8V XT60 Plug RC Boat Heli Airplane UAV Drone FPV

These are very powerful batteries for their size. They deliver plenty of juice to the motors, although the high amp delivery may slightly decrease flight time by a few seconds but not by many. I believe these batteries were made for racing although i am not totally sure. I dont race quadcopters so far but i like to fly fast and they certainly allow me to do that!

Details: brand: tattu capacity(mah): 1300mah voltage(v): 14. 8v discharge rate (c): 75c max burst discharge rate (c): 150c configuration: 4s1p net weight(dev. 20g): 155g length(dev. 5mm): 72mm width(dev. 2mm): 36mm height(dev. 2mm): 29. 4mm connector type: xt60 plug wire gauge: awg12 wire length(mm): 100mm balancer connector type: jst-xhr overview tattu is the world first battery brand who only focus on supplying power for drones, uav, uas and fpv products. Dedicating to providing better flight experience, tattu has been continuously putting great efforts in technology research & development and now has become the most famous and professional uav battery brand over the world. Features: 1. Superior japan and korea lithium polymer raw materials. 2. Automatic stacking technology, better performance 3. Strict matching progress, excellent consistency 4. Up to 200wh/kg energy density 5. Long cycle life (150 times minimum) 6. Local after-sales service(located in dublin, ca) notes: 1. Shipments fulfilled by seller are shipped from dublin, ca(can only shipped within usa and canada). 2. For any questions, pls feel free to contact us through "your orders" tab of your online store account, we will respond within one business day. 3. All rights reserved by gensace&tattu.

Tattu LiPo Battery Pack 1300mAh 75C 4S 14.8V XT60 Plug RC Boat Heli Airplane UAV Drone FPVTattu-Battery-1300mAh-14-8V-Airplane

See Tattu Battery 1300mah 14 8v Airplane (TA-75C-1300-4S1P) FAQ.

Beautiful battery in every way . Its a great battery for acro flying! this battery provides the punch you need when you need it! . I fly every day (15 packs) that means these batteries get some use! i've had no swelling, and little to no wearing of power over a 3 month period, that's 90 plus re-charges! how can you beat that! i'm pushing them pretty hard as far as i'm concerned, with 2205/2400 kv motors and 30a esc's with 5045-3 dal t-props to boot! -Notice from S. Wade, Doncaster

Click to Show tattu battery 1300mah 14 8v airplane (ta-75c-1300-4s1p) Details

You can tell as soon as you punch out that this battery can deliver a lot of power very quickly. It doesn't seem to sag, very consistent power. I would recommend this battery to anyone flying a racing quad.

Tattu-battery-1300mah-14-8v-airplane-(ta-75c-1300-4s1p) set picture

- K. AmandaInitially i was sent a battery that had some issues. Tattu saw my complaint and acted on it offering to replace the battery that i was having issues with. . So here's how things have played out with both batteries:. Battery 1: initially, i received the battery with two cells having different voltages. When charged it had cell 1 and 2 discharging at an incredibly fast rate even just overnight (waking up to less than 4v in cells 1 and 2). After using a good quality balancer to charge and discharge the battery on multiple cycles, the cells have begun acting normally. I charged each cell to 4. 20v last night and when i woke up they were at 4. 18v. This was a significant improvement over previous nights. During charging, the battery initially took 30 minutes longer at . 20a to balance charge cells 1 and 2; however, after working on fixing it the cells now charge at the same rate across the board. I've had to fix puffed packs and batteries before with other brands and they're normally never quite the same afterwards but in the case of the tattu, instead of a constant degradation and puffing, i've noted an increase in storage and discharge time while the charging time becoming noticeably better and there's zero signs of puffing whatsoever. . Battery 2: this battery was perfect out of the box. The cells were exactly the same voltage (3. 76v) when i received them, they charged at exactly the same rate, the discharge was as i expected. After running it through 8 charge and discharge cycles it has only gotten better. There's minimal discharge over night, the pack doesn't noticeably drop-off during use, and it seems to be capable of higher than the c rating. I hit it with 4 2205 2750kv motors pulling an average of 36a each today and monitored the stats with a blackbox. After draining it down to 3. 71v per cell, the battery was warm but could still be handled. The battery is rated at 95a continuous current (1300mah*75c/1000) so pulling 144a out of the battery without it being incredibly hot was pretty impressive. . Overall, i now see why tattu's are a highly desirable battery. What *really* impresses me though was their customer service. They didn't have to send me a new battery, i hadn't complained to them about it, all i did was put up a 3 star fairly neutral review and they went out of their way to make sure i had a good experience. I love good customer service so it looks like i've found my go-to battery now.

Currently own 7 tattu batteries, have flown many times with the original couple that i purchased and and have had no problems - even got the 1550 stuck in a tree overnight - battery was at 2. 3 volts and was able to revive with no puffing and all cells are balanced perfectly. Figured i'd get some more as you go through these in around 2 - 3 minutes (depending on how hard you push them, like to return back around 3. 8 volts per cell). . However, my last order of 3 had one dud, flown less than 5 times and the battery has a bad cell. However, i think it may have been damaging in shipping or a crash of my own fault - bottom of battery has a minor dent in it (always fly in grassy areas though). Might be good idea to inspect each battery right away in case it was shipping related.

Y. Finch, Lewisham

TATTU LIPO BATTERY PACK 1300MAH 75C 4S 14.8V XT60 PLUG RC BOAT HELI AIRPLANE UAV DRONE FPV Featured
  • Parameter: weight, 155g; dimension(l*w*h), 72*36*29. 4mm; connector, xt60 plug.
  • Tattu professional lipo battery; superior japan and korea lithium polymer raw materials.
  • What you get: tattu lipo battery pack with xt60 plug & local after-sales service (located in dublin, ca).
  • Quickly recharged, long cycle life (150 times minimum), up to 200wh/kg energy density.
  • Applications: nemesis 240 mini, skylark m4-fpv250, mini shredder 200, indy250 plus, hovership mhq2 (270), zmr 250, emax nighthawk 250, mini h, qav250, qav180/210, danaus, vortex 285, mini h, flip fpv frame, emax nighthawk 250, zmr 250, hovership mhq2, mojo 280, etc.
Brand :    tattu
Color :    black
Weight :    0.35 pounds
Model :    TA-75C-1300-4S1P
Quantity :    1
Order click here :    normally ships in 24 hours
Hobby :    Best Toys And Games (tattu product review) for Tattu LiPo Battery Pack 1300mAh 75C 4S 14.8V XT60 Plug RC Boat Heli Airplane UAV Drone FPV available as-of ( Jul 2020 )

Paraboard - Parallel Charging Board Lipos Xt60 Connectors (Common Sense Rc) Price : 19.99, was : 23.99 as 2017-02-15
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Paraboard - Parallel Charging Board Lipos Xt60 Connectors (Common Sense Rc) Reviewed by on wujus.com

Top paraboard - parallel charging board lipos xt60 connectors (common sense rc) Content

The F.A.Q. for Paraboard - Parallel Charging Board Lipos Xt60 Connectors (Common Sense Rc)

Love it

A number of questions have been asked here.

Q&A

(0) Question: Would this work with an orion charger


(1) Question: Do the instructions with this charging board clarify which balance plugs and charging plug pair together?


(2) Question: Can this adapter be used with the tenergy tb6-b 50w balancing charger?


(3) Question: Will this work with hitec multi-charger x1 ac plus?


(4) Question: Would this charge a duraxx 2s lipo


(5) Question: This is listed as being capable of 80 amps. how high have people run it? how hot does it get?


(6) Question: How is this one better than the ones that cost about half as much?


(7) Question: Prophet sport plus adapter compatibility? (does this work)


(8) Question: I have the imax b6 dual balance charger. will this work with it for charging multiple dji phantom1 batteries?



(note) Question: where/how to get Common Sense Rc (manufacturer's brand) accessories & similiar Common Sense Rc's products

Answer:

https://wujus.com/paraboard-parallel-charging-board-connectors-25430fzx6z6u/

Click the marked text to copy link to Clipboard

I've been flying quadcopters for about a year now and there is nothing more annoying than running out of batteries. Before getting this product, i would need to charge each of my individual batteries one by one using my balance charger and each battery would take upwards of an hour to get a decent charge on it. Using this allows me to charge up to six batteries at a time which is, frankly, amazing. . I have a balance charger with a configurable amperage setting so when i attached this and six batteries i can simply multiply the amperage i would use for one battery by six. This allows all of the batteries to be charged in the same amount of time that it would take to charge one battery. I generally use 3-cell batteries for my quadcopters and this does just fine for them. It also has leads for 2-cell, 4-cell, 5-cell, and 6-cell batteries so you can charge any of those assuming your balance charger supports them and can deliver the amperage you need. . The product itself is made of cheapo plastic, and the leads feel a bit flimsy. But i never really take this outside with me so i'm not worried about damage. It generally sits on the shelf next to my charger while i go out. I could imagine a person being able to damage the balance charger ports on the unit if they tugged the cable out with too much force but after almost a year of use i haven't had anything like this happen to me.


Battery Chargers 1105314322, Hobbies 110927672, Remote & App Controlled Vehicle Parts 1106214322, Remote & App Controlled Vehicles & Parts 1100385296, Toys & Games 110397561Top Paraboard - Parallel Charging Board Lipos Xt60 Connectors (Common Sense Rc) FAQ Content

Best paraboard - parallel charging board lipos xt60 connectors (common sense rc) in review

It does it's job

G. Walsh, York

You might like to see Combo special: tenergy tb6-b balance charger nimh/nicd/li-po/li-fe battery packs + power supply (tenergy) * nimh/nicd 1 15 cells ( 1. 2v to 18v) * li-po/lithium ion 1 6 series ( 3. 7v to 22. 2v) * li-fe 1 6 series * sealed lead acid (sla) * charge your nimh/nicd receiver packs: 3. 6v, toys and games
  • Feature: Various Connectors Supported:hitech, Jst, Deans, Tamiya, Mini Tamiya.
  • Feature: Balance Individual Cells On Discharge.
Competitive Combo Special Tenergy Balance Charger (Toys And Games) 90263 Combo Special Tenergy Balance Charger
Or you might like to consider Traxxas 3070 high-current connector, male pair (traxxas) revolutionary concepts come in all shapes and sizes, and the patented traxxas high-current connector defines the new standard for efficiency, ease of use, and high-current handling. hobbies
  • Supplementary: Offers Secure Low-resistance Connections Between Batteries And Escs.
  • Supplementary: Shrouded Wire Connections Eliminate The Extra Steps To Install Heat Shrink Tubing.
Top Rated Traxxas 3070 High-current Connector, Male Pair (Hobbies) Tra3070 Traxxas 3070 High-current Connector, Male Pair

S. Monique, Pays de la Loire says

If your batteries are the same age this okay. If not, it will set them all up as the weakest one. With this, your chances of a fire are multiplied by the number of batteries you have plugged into it at the same time. Make absolutely sure your charger can handle multiple batteries at the same time. And, whatever you do, do not charge batteries with this without an adult present throughout the entire process. In other words, don't plug it in and then walk away. Lipo batteries are a great invention but they all have the possibility of getting very hot when being used and can burst into flames. No matter which charger or adapter you use, do it with an extreme degree of caution when using lipo batteries.

K. Sheila, West Virginia

Works great, if you have never done parallel charging. Stop and read everything from the commonsenserc site. They have a pdf of its use. Reading and following that will make sure you maximize safety and optimal charging of your batteries

Q. Rose, Isle of Wight says

Does what it says, have had 0 issues charging multiple 4s batteries at once.

C. Patricia, Durham

Awesome to be able to charge so many batteries at once!

S. Zelda, Oregon says

I love this board. What a great way to charge batteries. This gets me out flying more often. I have not had any problems with this board. It is a quality build and is safe. I do still reccommend always keeping an eye or two on any batteries when charging them.

U. Garner, Hartlepool

Build quality seems pretty good including the soldering. Would be nice if the wires were a tad longer, or at least if the balance wires were as long as the main leads. Minor nitpicks though.

L. McCarthy, Massachusetts says

Does the job. Wished the balance cord was tad longer

B. Bertie, Wisconsin

Good product, fast processing of my order by the vendor, it works great! the board should come with plug covers to shield any open connectors when charging. This is a hazard you must be cautious with when handling the board.

X. Glenda, Thueringen says

Make sure you get the right balance cord for your particular charger. Read the instructions and be careful how you connect your batteries! always connect/disconnect the balance leads with the main lead plugged to prevent balance discharging through the leads when plugged into other batteries on the parallel circuit. In fact, do your homework and learn how parallel charging actually works so you don't start a fire. Lipo fires are serious business.

R. Veronica, Calderdale

Solid work boys! this has been a champ allowing me to charge 6 batteries at once. No complaints whatsoever. The xt60 connectors are solidly attached and don't wiggle or move. Fits perfectly into my icharger 3010b.

T. Juliana, Minnesota says

Works great, i've charged 6 lipos at 20amps through this.

I. Carrie, Hillingdon

Works great, if you have never done parallel charging. Stop and read everything from the commonsenserc site. They have a pdf of its use. Reading and following that will make sure you maximize safety and optimal charging of your batteries



Leave a Reply

You must be logged in to post a comment.


Top paraboard parallel charging board connectors Review Content

Related Products

Product Image Gallery

Top-paraboard-parallel-charging-board-connectors-25430fzx6z6u-Content