Powerextra 4480mah Intelligent Replacement Battery (LIPO-003WE1) 720

Powerextra 15.2V 4480mAh Intelligent Replacement Flight Battery for DJI Phantom 3 Drones - Upgraded Review (LIPO-003WE1)

You have to have spares if you want to be able to fly more than two or three seesions a day. So far they are performing as well as the more expensive factory battery. -O. Kelly

Powerextra 4480mah Intelligent Replacement Battery Toy

RCstyle Radar Antenna Range Booster DJI Phantom 3 Standard Controller Transmitter Signal Extend gold

Our products are affordable not because of product quality problems, but because the majority of our company to make low-cost uav enthusiasts are able to experience our quality products, we are a manufacturer with its own brand rcstyle, we have the best quality products and service experience for the uav enthusiasts. Rcg tiancheng copper antenna signal range booster for dji phantom 3 this product is designed for extending the range of transmitter signal, which makes you enjoy much more flying fun. More flying remote control distance means less chance of aircraft lost contact and low risk of the plane crash. Before use, please tear up surface touch, so as not to affect the range booster package included: 1 * copper antenna signal range booster (remote controller and dji phantom are not included)

RCstyle-Antenna-Standard-Controller-Transmitter

Neewer DJI Phantom 3 Standard Professional Advanced, Protective Camera Lens Cap Protector Cover + Flower-type Rose Petal Lens Hood Made of Premium ABS Plastic Black

Note: dji phantom 3 camera not included. Description: lens cap: custom made for dji phantom 4, dji phantom 3 standard, professional, and advanced camera lens. A must-have accessory to prevents the lens from dust and scratches. Lens hood: specially designed for dji phantom 4, dji phantom 3 standard, professional, and advanced. Engineered to match phantom 3 camera properties 16:9, 4:3, 94 degree fov. A must-have accessory to prevent your dji phantom 3 or 4 camera lens from propeller wash effects and lens flare and protect the lens while storing and transporting. Specifications: material: abs plastic compatibility: dji phantom 4, dji phantom 3 standard, professional, and advanced color: black lens cap weight: 0. 28oz / 7. 9g lens hood weight: 0. 14oz / 3. 9g package contents: 1*lens cap 1*lens hood

Neewer-Professional-Protective-Protector-Flower-type

BlueProton DJI Phantom 3 Standard WiFi Signal Range Extender Six 6 Antenna Kit w 10dBi 5.8GHz Omni ARGtek

Apparently a few models of this were defective in the last batch and caused quite a stir and an unreliable reputation on the forums and here in the online store reviews but it seems that's been fixed. My old record only being a 2000 feet stock this is a huge improvement. . When i installed this i didn't disconnect the battery or the other two wires they show in all of the videos. (it's safer for you but i was afraid of breaking the connections and or the board so i was only disconnecting the bare minimum of 3 cables). . Now the stated range was not my max range. I had severe cold and wind conditions and was afraid to push farther but i had my downlink (live video feed) stay perfectly clear and smooth the entire flight (something the 15 dollar boosters parabolic reflectors or "windsurfers" you put on your antenna won't do) i use the omni (tall antenna) in the middle for main controls and paddles on the sides (those are for your downlink). . Paddles are good for your downlink but the omni should be used for your main antenna (albeit you can you any setup you want i find this the best balance). . So was this worth my 68 bucks? very much so. . This mod is easy to install (you don't have to touch much) the hardest part of the install is getting the old silicone sealant off the original antenna connectors. After that it's easy street. . Only buy from blueproton there are lots of fakes out there this is the real deal

Blueproton dji phantom 3 standard wifi signal range extender antenna kit. (6)-antenna kit: (2)+(2) customized high-gain 2. 4ghz-2. 591ghz 7dbi panels & omnis, (1) 10dbi 5. 8ghz omni antenna, (1) 6dbi 5. 8ghz panel antenna with stand and installation hardware. Full lightweight, durable, pratical and convenient to use in compact design. Full range coverage, strong and stable signal improves both remote control and wifi video connection performance. Our antenna kits will extend the range up to 4 times the dji rating and help with the signal penetration around objects. Increases range from approx. 300m to up to 1200m. Actual range extension will depend on your exact deployment environment, and is not guaranteed. Installation is relatively simple with guided youtube video. This item is for the dji phantom 3 standard only.

BlueProton-Phantom-Standard-Extender-Antenna

See Blueproton Phantom Standard Extender Antenna (ARGtek-EXT1) FAQ.

Did increage range a little but not much more than the $12 parabolic i kept it since and purchased a 14dbi 5, 8ghz for the middle and boosted that signal and was then able to get over a mile . Unfortunately , i crashed my drone so i sold this . ( the drone crash had nothing to do with this antennae) also i broke the 10dbi antennae and call blueproton . I didnt hear anything back from them but received a new one in the mail. Excellent customer service -Notice from E. Lewis, Kentucky

Click to Show blueproton phantom standard extender antenna (argtek-ext1) Details

For starters, anyone saying this made their signal worse. Didn't install it correctly. There are only 3 wires that need to be popped off their connectors, they are held on by small dots of glue. I used a small screwdriver and pulled the glue away from the connectors as i pulled up on the wire and they popped off (don't be afraid to use a little force, if they are on there properly it'll take a tug). 2 of those wires connect to little square antennas which are held on with glue again (you remove these). I just pulled up on the antenna while chipping away at the glue with my screwdriver and they came off. The other wire is connected to the original antenna which you remove. Now here comes the part where you need to focus. Snapping these 3 new wires onto their respective bases. You really have to snap them on or they wont work. (people having range issues after installing this mod probably didn't push down hard enough so these new connectors snapped tightly into place). Once you have them tightly in place. Pull up on them. If they come right off they are not on properly! they should stay on there solidly when you pull up on them. Once you are sure they are on there tightly put a dot of hot glue on the connection to make sure they stay put. After that reassemble the controller and enjoy the range boost this setup will give you. It works, as long as you do it right. Very pleased. When i shop on online store i rely heavily on other peoples reviews to help me make the right choice on what to buy and what not to buy. I depend on other peoples honesty to help me make wise choices when purchasing items here on online store. Com. I try to give as much detail as i can when i can without being long winded. If you have any questions for me on something i failed to mention please ask and i will respond quickly. I love milo!

- I. AnonymousI was a bit skeptical whether this product would work or not but based on the advertised product description and function i figured i'd give it a try. Removing the old antennas and installing the new took about 20 minutes, i took my time because i didn't want to damage old hardware encase things didn't work as advertised. . Flight test with the omni antennas and flew out over 2700 feet, i did need to adjust antennas position and height of the drone a few times to get better signal but i was very pleased with the signal strength and video. I could have traveled further but i get concerned about fling out so far and losing my drone. I'll be testing the panel antennas on a warmer clear day. Things to consider when flying, how far a signal can actually travel is dependent solely on the medium it has to travel through. As the wifi (2. 4ghz) signal is at, or around, one of the harmonics of the resonant frequency of the hydrogen atom, anything with a high water content reduces the signal considerably. This is why your satellite signal goes screwy when there's to much cloud and rain. Trees contain a lot of water so they attenuate the signal a considerable amount. You may not think it, but buildings contain a considerable amount of water; not in its liquid form, but present in the concrete and cement and bound there as part of the chemical reaction that hardens it.

Just got it today, so we shall see how it holds up. I was getting roughly 500ft distance 300ft altitude in indianapolis. Very high interference where i'm at because of the houses and call towers (3 within 2 blocks of me). After i did this mod i got 2, 238 feet in one direction, 1, 947 in another, and 2, 176 in another. I didn't go east because of a school letting out for the day, better safe than sorry. . Installed this bad boy today. Installation is very easy. Watch the video, do what it says. I recommend getting yourself some good tweezers so you can 'grab' the glue and connectors. This way you pull them straight up and avoid messing up anything inside of your handset. . So in the end, i'm very pleased with the performance boost i've got so far. I can't wait to get it a bit out of the city and see what it can do. Everything you need is in the box (minus the glue gun if you want to add that extra bit on the ends). If you have a phantom 3 standard, stop waiting, get this. You will not be disappointed.

O. Bethany, Nebraska

SummitLink Snap On/off Prop Guards 2x Red 2x White DJI Phantom 1 2 3 Quick Connect Tool Free Also Fit on Phantom 3 Standard

Very well packaged and great attention to detail. I was slightly skeptical after reading other reviews, but as of october 2015, mine came with two sets of screws, each labelled, one for phantom 1 and 2, and the other for the phantom 3. Next pleasant surprise was that there were two allen wrenches included, one to remove the original phantom motor mount screws, and the other larger size for installing the new mounting screws for the phantom 3 (the one i bought). I also skeptically checked the length of the news screws and they were exactly the correct length when adding the depth of the new prop guard mounts, so no trouble at all installing. There were also 18 screws, not just the required 16 in my phantom 3 bag, nice touch. Upon removing the original phantom screws, i noticed a very small amount of blue loctite at the distal tip of the threads, so put a similar small dab of blue (medium) loctite on the new screws. When installed, the fit was perfect for the original blades for the phantom 3 professional. (i did not use the cord to connect the outsides of the individual prop guards. ) i kept the original screws if i decide i don't need the prop guards in the future. Great option for me as a new phantom user.

Since the introduction of the phantom, pilots have had to take their props guards off in order to put it in a carry case. Or you had the choice in spending a couple of hundreds of $ more to buy a case to keep them on. That is no longer the case, now we introduce the worlds 1st snap on/off complete prop guards kit! fits up to 10 inch props. Fits all phantom versions, including phantom 1, phantom 2, phantom vision, phantom 2 vision+, phantom 3 professional and advanced and standard, phantom fc40.

SummitLink-Guards-Phantom-Connect-Standard

See Summitlink Guards Phantom Connect Standard (7E-HLNT-D3RR) FAQ.

Being a relatively new uav pilot, i had an encounter with a lamp post on about my 5th flight (prior to these prop guards. ) understandably, props stopped, phantom 3 fell like a rock about 15' to the grass. Luckily no harm done other than one broken propeller. Recognizing an immediate need for this item, i purchased them that same day. . They install easily, they snap on and off easily, and the red helps identify the orientation in the air. Today for the first time i tested their functionality - by accidentally backing my uav into some spruce trees about 50' off the ground. Other than a slight wobble and a spray of spruce needles everything worked fine - the aircraft stayed in the air and i was able to continue. Upon landing i had to wash off the green patina that the props, guards, and top of the uav got from the shower of foliage - and i'm good to fly again without damage! i'm almost positive that without these guards, i would be deciding how/where to get my phantom 3 repaired. -Notice from S. Whiteman, Nevada

Click to Show summitlink guards phantom connect standard (7e-hlnt-d3rr) Details

Just got a set in the mail. They are quite sturdy and i liked the two colors and the removable feature. What is strange is there is no instructions included but you just remove motor screws and replace them with the included screws. Once snapped on they will not come off.

- U. LynetteLove it! easy to install and it fits perfectly on both my phantom and cheerson cx-20 drones.

Four stars because these guards are tough, light weight, slip on and off easily and do a good job of protecting the propellers, but cost aircraft performance. I installed these on my phantom 3 and noted the following:. 26% reduction in top speed. Reduced climb rate. Reduced maneuverability (roll and pitch rate a little slower). Guards are visible in the camera view when cruising at higher speeds with the camera set level. . They will work great for most of my slow speed flying close to obstacles and will save a lot of broken propellers. But i'll probably remove them for flying in the wide open. The easy-on, easy-off feature is great for taking it down to pack it in the soft case. And i can still get it into my cut-out soft case with the guard receptors in place. There are no stability problems when descending with these guards in place as some have reported on youtube. I have descended with full down stick and the drone was as stable as it is without the guards.

C. Wayt, Hamburg