Summitlink Guards Phantom Connect Standard (7E-HLNT-D3RR) 377

Review for summitlink guards phantom connect standard

Price was $14.99. Prop guards are a must have for any skill level because they greatly mitigate the damage to the props caused by the nuisance bumps and nicks that will happen even to the most skilled drone pilot. . I give overall quality a 4. The guards feel thick and sturdy and not at all "flimsy" as some others have stated. They are heavier than the branded dji prop guards for the p3. I take off one point because they feel a little rough and unfinished. However, the fact that the red guards give a larger visual reference to the front of the vehicle is extremely useful. . Installation is quick and intuitive. I take no points off because there are no instructions - none are needed.  its like saying that you take off points when reviewing a pair of shoes because they didn't come with instructions. If you're intelligent enough to figure out how to fly and control a drone, you don't need instructions to install these. It took less than 10 minutes for all 4.  and yes, the installation screws are a different size but they included all tools required for installation. . The ease of removing the guards is invaluable to ensuring portability. You can have the props and guards on or off in under one minute.     and finally, i did not perceive any performance degradation or flight characteristic changes.

-Y. Perez

Summitlink snap on/off prop guards 2x red 2x white dji phantom 1 2 3 quick connect tool free also fit on phantom 3 standard (summitlink) since the introduction of the phantom, pilots have had to take their props guards off in order to put it in a carry case. or you had the choice in spending a couple of hundreds of hobbies

  • Details: Include Screws For Phantom 3 Professional Advanced And Standard.
  • Details: Mounting And Unmounting Takes Only Seconds. Fits Up To 10 Inch Props. Tool-free Installation.

Inexpensive Summitlink Guards Phantom Connect Standard (Hobbies)

Buy Now

Prologue

This is a well made product. It comes with everything you need including the allen wrench and longer motor mount screws to compensate for the thickness of the mounts. The guards snap on and off very quickly and easily. Just be sure, if you ever remove the mounts for whatever reason, you must be sure to replace the original screws. Otherwise, you will permanently damage your motors by threading the longer screws into the inner motor workings. Many people have made this mistake and ruined their motors. The only other thing is, if you ever want to remove the top of the phantom shell with this installed, you will have to remove these mounts to get to the screw located on the bottom tip of the wing. A better design would have allowed access to that lone screw on the wing tip allowing you to remove the shell without having to remove these prop guard mounts. Finally, many believe there is a slight increased risk of vrs (vector ring state) with these attached. The Best SummitLink Snap On/off Prop Guards 2x Red 2x White for DJI Phantom 1 2 3 Quick Connect Tool Free Also Fit on Phantom 3 Standard as-of ( Sep 2020 ) | Summitlink-Hobbies Review Details SummitLink Snap On/off Prop Guards 2x Red 2x White for DJI Phantom 1 2 3 Quick Connect Tool Free Also Fit on Phantom 3 Standard Snap on/off removable prop guards for phantom 1 2 and phantom 3 all version. Include screws for phantom 3 professional advanced and standard. Mounting and unmounting takes only seconds. fits up to 10 inch props. tool-free installation.. With these prop guard, you will never break your props and crash your phantom by accidently bump into trees, walls, or any other obstacles.. Dji phantom prop guard tool-free quick snap on/off prop guards .

These guards are solid and have saved a total of five crashes and my propellers only suffered grass stains and other scuffs. I am new to flying drones but i love to fly it fast and up and down around trees. Its so much fun! well i am still "practicing". This item is worth every penny! -A. Widmer

Summitlink Snap On/off Prop Guards 2x Red 2x White Dji Phantom 1 2 3 Quick Connect Tool Free Also Fit On Phantom 3 Standard

Brand
SummitLink
EAN
0758149830384
Product Dimensions
Height:2.00 inches
Length:10.00 inches
Weight:0.45 pounds
Width:6.00 inches
Manufacturer
SummitLink
Suggested Min-Age
12
MPN
7E-HLNT-D3RR
Quantity
1
Part/Serial Number
7E-HLNT-D3RR
Group-Order
Toy
Category
HOBBIES
Product-Name
SummitLink Snap On/off Prop Guards 2x Red 2x White For DJI Phantom 1 2 3 Quick Connect Tool Free Also Fit On Phantom 3 Standard
UPC
758149830384

Toy(758149830384:Hobbies), Summitlink Guards Phantom Connect Standard (0758149830384:Summitlink), Since the introduction of the phantom, pilots have had to take their props guards off in order to put it in a carry case. or you had the choice in spending a couple of hundreds of $ more to buy a case to keep them on. that is no longer the case, now we introduce the worlds 1st snap on/off complete prop guards kit! fits up to 10 inch props. fits all phantom versions, including phantom 1, phantom 2, phantom vision, phantom 2 vision+, phantom 3 professional and advanced and standard, phantom fc40..

Summitlink Guards Phantom Connect Standard Toy

Summitlink Guards Phantom Connect StandardSummitLink Snap On/off Prop Guards 2x Red 2x White for DJI Phantom 1 2 3 Quick Connect Tool Free Also Fit on Phantom 3 Standard (Switch to Mobile/Desktop Version)

I have to tell you, i did a little tree trimming with this set of guards on my djip3a. I did end up breaking one of the guards. This caused me to order another set of guards. The great thing about this set of guards is that i simply unsnapped the broken guard and snapped on the new guard. Unlike the stock set of guards that have to be bolted on and off, these just snap off for transportation then snap on for flight. I also like that they are red and white. Makes it great to see at altitude. I would never go back to the stock guards. These are so much better. Just sain.

Summitlink Guards Phantom Connect Standard (Hobbies)
Click to see NoticeSummitlink Guards Phantom Connect Standard (7E-HLNT-D3RR)"This is a well made product. It comes with everything you need including the allen wrench and longer motor mount screws to compensate for the thickness of the mounts. The guards snap on and off very quickly and easily. Just be sure, if you ever remove the mounts for whatever reason, you must be sure to replace the original screws. Otherwise, you will permanently damage your motors by threading the longer screws into the inner motor workings. Many people have made this mistake and ruined their motors. The only other thing is, if you ever want to remove the top of the phantom shell with this installed, you will have to remove these mounts to get to the screw located on the bottom tip of the wing. A better design would have allowed access to that lone screw on the wing tip allowing you to remove the shell without having to remove these prop guard mounts. Finally, many believe there is a slight increased risk of vrs (vector ring state) with these attached."


Action Figures & Statues » Arts & Crafts » Baby & Toddler Toys » Building Toys » Dolls & Accessories » Dress Up & Pretend Play » Kids' Electronics » Games » Grown-Up Toys » Hobbies » Kids' Furniture, Décor & Storage » Learning & Education » Novelty & Gag Toys » Party Supplies » Puppets » Puzzles » Sports & Outdoor Play » Stuffed Animals & Plush Toys » Toy Remote Control & Play Vehicles » Tricycles, Scooters & Wagons » Video Games » Summitlink Guards Phantom Connect Standard (Hobbies)


SummitLink Sticker Set ID Marking Decal for DJI Phantom 3 Standard Multifunction Red

For dji phantom 3 standard high contrast making it more visible to ensure safer operation red color for easier identification high quality waterproof for longer life simple application easy to install and remove without damaging your aircraft dji phantom 3 standard transmitter sticker set. It has clear markings for easier identification of buttons and functions on your phantom remote control. It offers a great way of quick reference of different modes and light signals to eliminate human error in operating your phantom. You can fly safer!

SummitLink Sticker Set ID Marking Decal for DJI Phantom 3 Standard Multifunction RedSummitLink-Sticker-Set-ID-Marking-Decal-for-DJI-Phantom-3-Standard-Multifunction-Red

SUMMITLINK STICKER SET ID MARKING DECAL FOR DJI PHANTOM 3 STANDARD MULTIFUNCTION RED Advantage
Brand :    summitlink
Model :    P3StandardSR
Quantity :    1
Order click here :    normally ships in 24 hours
  • High quality waterproof for longer life
  • Red color for easier identification
  • For dji phantom 3 standard
  • High contrast making it more visible to ensure safer operation
  • Simple application easy to install and remove without damaging your aircraft
Automotive Parts And Accessories :    Best Auto Accessory (summitlink product review) for SummitLink Sticker Set ID Marking Decal for DJI Phantom 3 Standard Multifunction Red available as-of ( Sep 2020 )

TELESIN Extended Landing Gear Protector Kit Lengthened Heightened Landing Skid For DJI Phantom 3 Quadcopter Accessories-Black

Shipping weight: 15g made of plastic color:black package includes: 1 pair of landing gear for dji phantom 3

TELESIN Extended Landing Gear Protector Kit Lengthened Heightened Landing Skid For DJI Phantom 3 Quadcopter Accessories-BlackTELESIN-Lengthened-Heightened-Quadcopter-Accessories-Black

TELESIN EXTENDED LANDING GEAR PROTECTOR KIT LENGTHENED HEIGHTENED LANDING SKID FOR DJI PHANTOM 3 QUADCOPTER ACCESSORIES-BLACK Overview
  • Widens stance to prevent tipping over during takeoff/landings
  • Fits dji phantom 3 professional, advanced, standard drones
  • Product dimensions(w x l x h): 2. 4 x 22. 5 x 5 cm/0. 9 x 8. 8 x 2. 0inch
  • Raises aircraft up 1 inch-keeping camera away from dirt/sand/rock scratches
  • Secure snap-on design for quick installation and removal
Brand :    telesin
Color :    P3 Landing Gear
Model :    0533832
Quantity :    1
Order click here :    normally ships in 1-2 business days
Toy :    Best Hobbies (telesin product review) for TELESIN Extended Landing Gear Protector Kit Lengthened Heightened Landing Skid For DJI Phantom 3 Quadcopter Accessories-Black available as-of ( Sep 2020 )

Landing Gear Stabilizers DJI Phantom3 Standard, Advanced, Professional 4K Quacopters Drones

Telesin phantom 3 landing gear for the phantom 3 series increases stability of the phantom 3 by widening the stance. Telesin phantom 3 landing gears provide the phantom 3 with a wider stance for landing and taking off on uneven terrain. The landing gear easily snaps on/ off for quick and easy storage. The landing gear securely clips onto the legs for easy installation and removal. By widening the legs the phantom 3 is less prone to tipping over during rough takeoff's and landings. The landing gear also enables the phantom 3 to take off from uneven surfaces. In addition to the wider stance, the legs also raise the phantom 3 up by 1 inch to keep the camera further away from the dirt. The landing gear is a great addition to help you protect your dji phantom 3. Package content: 1 pair landing gear legs for phantom 3

Landing Gear Stabilizers DJI Phantom3 Standard, Advanced, Professional 4K Quacopters DronesStabilizers-Phantom3-Standard-Professional-Quacopters

LANDING GEAR STABILIZERS DJI PHANTOM3 STANDARD, ADVANCED, PROFESSIONAL 4K QUACOPTERS DRONES Advantage
  • 4. raises aircraft up 1 inch-keeping camera away from dirt/sand
  • 1. fits dji phantom 3 professional, advanced, 4k, standard drones
  • 2. secure snap-on design for quick installation and removal
  • 5. covered under 1-year warranty
  • 3. widens stance to prevent tipping over during takeoff/landings
Brand :    cob
Model :    COB-LG-P3
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Camcorder (cob product review) for Landing Gear Stabilizers DJI Phantom3 Standard, Advanced, Professional 4K Quacopters Drones available as-of ( Sep 2020 )

Powerextra 15.2V 4480mAh LiPo Intelligent Battery Replacement battery DJI Phantom 3 Professional, Phantom 3 Advanced Phantom 3 Standard, 4K Drones - Upgraded

As good as the original, maybe a bit better. The led's are dimmer, that's the only difference. Love it.

Note: why is the discharge time of the battery not zero, even though i have never used it? re: every battery is tested prior to being packaged and shipped. This affects the discharge time of a new battery and is the reason that the discharge time is not zero. The battery is safe to use. Powerextra 15. 2v 4480mah lipo intelligent battery replacement battery for dji phantom 3 professional, phantom 3 advanced, 4k and phantom 3 standard drones about powerextra powerextra is specialized in manufacturing various power tool batteries. Being one of the top selling brands of power tool replacement batteries in online store, powerextra batteries feature good quality by first-rate manufacturing materials and designs. Products are ce certified for the standards and specifications of oem products to be completely compatible with power tools. With reliable quality and customer services, powerextra replacement batteries will be the best choice for your power tools. Powerextra focus on providing high quality power products and excellent customer service, looking forward to your support and your positive affirmation. Specifications: battery type: lithium-polymer battery output power: 15. 2v capacity: 4480mah power: 68wh operating temperature: 0-40 celsius degree compatible with: dji phantom 3 advanced dji phantom 3 professional dji phantom 3 standard dji phantom 3 4k package included: 1 x powerextra 15. 2v 4480mah high performance flight battery

Powerextra 15.2V 4480mAh LiPo Intelligent Battery Replacement battery DJI Phantom 3 Professional, Phantom 3 Advanced Phantom 3 Standard, 4K Drones - UpgradedPowerextra-Intelligent-Replacement-Professional-Advanced

See Powerextra Intelligent Replacement Professional Advanced (UAV phantom) FAQ.

Pretty good battery and for this price, it's pretty good deal. Didn't feel any difference from original dji battery, except for led lights. It's hard to see lights during daylight, so that's an inconvenience. I wish they used brighter leds and it would just be an awesome deal! -Notice from R. Ruff, North Dakota

Click to Show powerextra intelligent replacement professional advanced (uav phantom) Details

So far so good, i have used it for about 3-7 flights now and it hasn't given me any problems. Honestly i think it last longer than the battery my dji phantom 3 professional came with lol. I will update the review as i get more fly time with it! otherwise i wouldn't hesitate to purchase again which i will soon!

Powerextra-intelligent-replacement-professional-advanced-(uav-phantom) set picture

- C. BroylesBattery works as advertised, great customer service. Perfect match and material quality was the same as oem on inspection. Led indicator was slightly dimmer but i like the brightness better.

I have now had the battery through several charges and flights and can say that i have had no issues. It performs just like the original. It is very similar with very subtle differences. It doesnt click in quite as good and has different writing and light indicators but very similar. Price is fair enough for such a pricey unit.

Y. Candy, Hamburg

POWEREXTRA 15.2V 4480MAH LIPO INTELLIGENT BATTERY REPLACEMENT BATTERY DJI PHANTOM 3 PROFESSIONAL, PHANTOM 3 ADVANCED PHANTOM 3 STANDARD, 4K DRONES - UPGRADED Benefits
Brand :    powerextra
Size :    DJI phantom 3 replacement battery
  • Notes: before using battery for more flights, please charge the battery fully and try one flight for checking, which will make the battery better fit for dji phantom 3 drones.
  • With 4480mah of power you can expect flights of 15-23 minutes on a single charge. the flight time depends on a number of external factors.
  • Battery type: lipo cells, voltage: 15. 2v, capacity: 4480 mah, power: 68 wh, with built-in 4 led indicator lights to show how much power, that is remaining at the touch of a button.
  • Multiprotect safety system, over-charging protection, over- discharging protection and short circuit protection. all powerextra battery packs comply with rohs and ce security testing standards.
  • Perfectly compatible with dji phantom 3 advanced, phantom 3 professional, phantom 3 standard, phantom 4k and phantom 3 charger.
Model :    UAV phantom
Quantity :    1
Order click here :    normally ships in 24 hours
Toy :    Best Hobbies (powerextra product review) for Powerextra 15.2V 4480mAh LiPo Intelligent Battery Replacement battery DJI Phantom 3 Professional, Phantom 3 Advanced Phantom 3 Standard, 4K Drones - Upgraded available as-of ( Sep 2020 )

Neewer DJI Phantom 3 Standard Professional Advanced, Protective Camera Lens Cap Protector Cover + Flower-type Rose Petal Lens Hood Made of Premium ABS Plastic Black

Note: dji phantom 3 camera not included. Description: lens cap: custom made for dji phantom 4, dji phantom 3 standard, professional, and advanced camera lens. A must-have accessory to prevents the lens from dust and scratches. Lens hood: specially designed for dji phantom 4, dji phantom 3 standard, professional, and advanced. Engineered to match phantom 3 camera properties 16:9, 4:3, 94 degree fov. A must-have accessory to prevent your dji phantom 3 or 4 camera lens from propeller wash effects and lens flare and protect the lens while storing and transporting. Specifications: material: abs plastic compatibility: dji phantom 4, dji phantom 3 standard, professional, and advanced color: black lens cap weight: 0. 28oz / 7. 9g lens hood weight: 0. 14oz / 3. 9g package contents: 1*lens cap 1*lens hood

Neewer DJI Phantom 3 Standard Professional Advanced, Protective Camera Lens Cap Protector Cover + Flower-type Rose Petal Lens Hood Made of Premium ABS Plastic BlackNeewer-Professional-Protective-Protector-Flower-type

NEEWER DJI PHANTOM 3 STANDARD PROFESSIONAL ADVANCED, PROTECTIVE CAMERA LENS CAP PROTECTOR COVER + FLOWER-TYPE ROSE PETAL LENS HOOD MADE OF PREMIUM ABS PLASTIC BLACK Advantage
Brand :    neewer
  • Specially designed lens cap and lens hood for the dji phantom 3 standard, professional, and advanced
  • Note: dji phantom 3 camera not included
  • The lens hood is cut out in a rose petal design to effectively prevent sun flare and prop shadowing
  • The lens cap helps lock camera to gimbal and prevent the lens from dust and scratches while storing and transporting
  • Made of high impact abs plastic for extra durability. lightweight design with fine workmanship for excellent well-built products
Model :    Neewer
Quantity :    1
Order click here :    normally ships in 24 hours
Photography :    Best Camera Other Accessories (neewer product review) for Neewer DJI Phantom 3 Standard Professional Advanced, Protective Camera Lens Cap Protector Cover + Flower-type Rose Petal Lens Hood Made of Premium ABS Plastic Black available as-of ( Sep 2020 )

Neewer Carbon Fiber Black Gimbal Guard DJI Phantom 3 Standard, Professional Advanced, Protects Camera & Gimbal

Compatible with dji phantom 3 standard, professional and advanced. *note: phantom 3 camera in the picture not included! *note: not compatible with dji phantom 4* description: neewer black gimbal guard is a wonderful accessory to protect your dji phantom camera and gimbal from taking the damage in flight and recording. Compatible with dji phantom 3 standard, professional and advanced. Made of premium carbon fiber material, offers enough strength. Compact design, will not block the view of the camera when pointing down. Very convenient to install and remove. Specifications: size: 6. 4"x2. 8"/16. 2cmx7. 2cm weight: 0. 6oz/17g color: black material: carbon fiber package contents: 1*neewer gimbal guard.

Neewer Carbon Fiber Black Gimbal Guard DJI Phantom 3 Standard, Professional Advanced, Protects Camera & GimbalNeewer-Standard-Professional-Advanced-Protects

NEEWER CARBON FIBER BLACK GIMBAL GUARD DJI PHANTOM 3 STANDARD, PROFESSIONAL ADVANCED, PROTECTS CAMERA & GIMBAL Highlight
Brand :    neewer
Color :    NA
Model :    40086668
Quantity :    1
Order click here :    normally ships in 24 hours
  • Provide a clear camera view - you will not see the gimbal guard in frame
  • Extremely light-weight, do not interfere a little with flight
  • Real 100% carbon fiber construction, strong enough and built to last
  • Compatible with dji phantom 3 standard, professional and advanced. *note: phantom 3 camera in the picture not included
  • Prevent the camera and gimbal from damage during takeoff and landing(sand, snow, grass, trees, fence. ).
Photography :    Best Camera Other Accessories (neewer product review) for Neewer Carbon Fiber Black Gimbal Guard DJI Phantom 3 Standard, Professional Advanced, Protects Camera & Gimbal available as-of ( Sep 2020 )

SKYREAT Gimbal Guard DJI Phantom 3 -Protects Gimbal & Camera .

1 x gimbal-guard for dji phantom 3 4 pcs tether

SKYREAT Gimbal Guard DJI Phantom 3 -Protects Gimbal & Camera .SKYREAT-Gimbal-Phantom-Protects-Camera

SKYREAT GIMBAL GUARD DJI PHANTOM 3 -PROTECTS GIMBAL & CAMERA . Benefit
Brand :    skyreat
Size :    P3 Professional & advanced
Weight :    0.5 pounds
Model :    SK-0004
Quantity :    1
Order click here :    normally ships in 24 hours
  • Adjustable and will not interfere with the vps
  • 100% carbon -fiber.
  • Clear camera view - you will not see the gimbal guard in frame
  • Protects your gimbal, ribbon cable & camera - (will reduce tremendously or even prevent damage to your gear)
  • Easier & safer takeoff and landing (sand, snow, grass, trees, fence)
Home Theater :    Best Camcorder (skyreat product review) for SKYREAT Gimbal Guard DJI Phantom 3 -Protects Gimbal & Camera . available as-of ( Sep 2020 )

DJI Genuine DJI Phantom 3 9450 Props Part 09 Self-Tightening Propeller 9 All Composite For Professional Advanced, 2 Pairs

Hightlights self-tightening design keeps the propellers securely to each motor compatible with phantom 3 professional and phantom 3 advanced durable plastic construction provides both lightness and rigidity overview self-tightening design, simply rotate the propellers by hand to attach or detach. One pair of propellers: 1 clockwise and 1 counter-clockwise propeller. Basics: each propeller weights 13g, diameter and screw pitch is 24 12. 7cm. Compatibility compatible with phantom 3 professional and phantom 3 advanced

DJI Genuine DJI Phantom 3 9450 Props Part 09 Self-Tightening Propeller 9 All Composite For Professional Advanced, 2 PairsDJI-Phantom-9450-Self-Tightening-Professional

DJI GENUINE DJI PHANTOM 3 9450 PROPS PART 09 SELF-TIGHTENING PROPELLER 9 ALL COMPOSITE FOR PROFESSIONAL ADVANCED, 2 PAIRS Benefit
Brand :    dji
Color :    White
Size :    9450
  • Basics: each propeller weights 13g, diameter and screw pitch is 24 12. 7 cm
  • Self-tightening design keeps the propellers securely to each motor
  • Includes two pair of propellers: 2 clockwise and 2 counter-clockwise propeller
  • Compatible with phantom 3 professional and phantom 3 advanced
  • Durable plastic construction provides both lightness and rigidity
Model :    DJI Phantom 3 9450
Quantity :    1
Order click here :    normally ships in 24 hours
Photography :    Best Camera Other Accessories (dji product review) for DJI Genuine DJI Phantom 3 9450 Props Part 09 Self-Tightening Propeller 9 All Composite For Professional Advanced, 2 Pairs available as-of ( Sep 2020 )

DJI Phantom P3-STANDARD Quadcopter Drone 2.7K HD Video Camera

The good: to anyone thinking the standard is substandard - lol - i own one and love it. It is the perfect drone for a first time pilot, and i know several experienced pilots who buy the standard as back up drones. The main limitation of the standard is that the range it can fly is about half of the higher up models, and it uses fewer gps signals and has no downward looking visual "eye" like the advanced and pro, so it will drift more up down and sideways (but not a whole lot) and not land quite as accurately at the take off point automatically. I give mine a 15 foot radius for safety in landings and sometimes it will land 10-12 feet from take-off point on auto-land. Advanced and pro stay within 2-6 feet usually. The controller is more limited with older technology. But the standard flies just as fast, and as high, takes just as good video and pics and is just as much fun as the $1000 models for 1/3 the price. In the beginning you always want to fly within line of sight (standard's limitations keeps you there) and legally you are always supposed to fly line of sight. The bad: dji leads a new user to believe all the built in guidance system will do everything for you from takeoff to landing. And it will, until it doesn't. That will happen, not an if - it is a when. You have 3 sensitive components talking to each other (controller / drone / smartphone) using both wi-fi and radio, plus very sensitive onboard compass and gps. This overly complicated plumbing will fail at some point and it can happen even a few feet away. At that point, you need to switch to manual control immediately - and hope you have time. I have had compass errors happen 3 feet off the ground in auto land and the dreaded "crazy flying meat slicer with 4 exposed blades" needed to be grabbed by the landing gear to stop it from hitting things as it got confused and would not respond to the controller. Btw: a pair of chef's slice proof gloves is a great idea at take offs and landings, don't ask how i know. Rule number one: always be prepared for the unexpected! like flying a private plane the phrase "hours of calm punctuated with seconds of panic" applies here. Best advice for new pilots - learn to do everything manually first - especially landing - because at some point you will need that skill and need it fast! also never ignore the long boring preflight compass calibration. I do it every time i set up for flight. Not only does it re calibrate your compass - more importantly - it warns you if there are magnetic disturbances. If there are - my advice is pack it up and move elsewhere, or fly totally on manual control. Ignore any of those warning at your own risk. Compass or gps warnings for a new pilot mean wait or relocate. Safety: never forget how dangerous these machines are. 3 pounds with spinning blades plummeting from 400 feet is a deadly weapon. Don't fly over people or roads. Warn folks near by to be aware of the drone. A drone, under the right set of circumstances with a simple malfunction could kill a pet or a human. It's like owning a gun, be responsible or don't own it. Never do like these youtube folks and fly it miles away to see how far it can go or push the limits to see how fast you can swoop over a crowd of people. That is inviting disaster. The middling - should the worst happen with the standard, and you make a fatal flying error - more likely when a new pilot then you are out only $400 or so max, instead of a grand, and actually less if you sell the remaining controller and battery etc. On ebay. Every piece of a dji is worth money and easy to sell, so pick up the pieces if you can. If you can find your crashed drone dji may fix it under warranty if it was the drone's fault, but don't count on it. Dji at this point in time has horrible support, if that changes, it would be wonderful. I would buy a 3rd party crash warranty over dji's coverage any day of the week, if that is important to you. They are sold here on online store btw. Nice part: battery lasts longest of all the dji p3 models in the standard version by 2 - 3 minutes because of fewer sensors. If you step up to a p3 pro - batteries and case can come along (but not p4) and at $100 plus per battery, that is good news. Eventually you will want 3 or 4 batteries so you can fly an about hour with juice to spare for landings, trust me. Bottom line: most of the "bad" i listed applies to any drone, from $49 to $5000. You can watch at least 3 videos on youtube of folks crashing $3000 dji vision drones on their very first flight, despite the vision having much more tech and more sensors and collision avoidance. Sensors or not, if you tell it to go into a wall because you are disoriented and unfamiliar with the controls, it's going to do what you say. This sad story happens every day. This is why i don't encourage a new drone pilot to drop a grand or more on a first drone. Fly a while first and you will never get that disorientation that can cost you a fortune, as you will understand the principles and react instinctively to the inevitable unexpected situation. On the other hand, most any drone any cheaper or similarly priced as this is not a "real" drone, so you can't take as many of the skills with you when you step up. Many drones in this price range have nothing better to step into. Once you learn to fly a dji and get familiar with their software and controllers - you can fly their whole line pretty much. I haven't yet mentioned the excellent camera that makes me often joke "for the price of a gopro, i got a comparable camera with a stabilizing gimbal that flies. " put all this together and that is why, in my opinion, this is the best deal in drones right now - by far. . If this review was helpful, please click the button that says "helpful"

The phantom 3 standard is the best way to start enjoying aerial photography, even with no prior experience. With the all-in-one ready to fly design and simple gps- assisted flight, the phantom 3 standard lets you focus on taking great pictures and videos from the sky. With a range of over half a mile and crystal clear live video streaming over wi-fi to your mobile device on the free dji go app, the phantom 3 standard delivers sophisticated functionality with a simple learning curve and an accessible price point.

DJI Phantom P3-STANDARD Quadcopter Drone 2.7K HD Video CameraDJI-Phantom-P3-STANDARD-Quadcopter-Camera

See Dji Phantom P3-standard Quadcopter Drone 2.7k Hd Video Camera (Camcorder) FAQ.

Bought this at sams club for $479. 00. Better price, better and quicker return policy just in case. This is not a beginners drone. You have to crawl before you can walk. I started out on a syma x5c -1. Then decided i needed to upgrade. You can discard the bad reviews about the flyaways because that most likely happens for rookies thinking they can start off on this drone, uhnt uhh. This quadcopter takes amazing videos and photos. The battery life is superior to other quadcopters in its class, which is the main reason why i bought it. It lasts about 25 minutes and takes only a hour to charge. The sams club one seems to be better packaged than the ones bought online. I seen youtube videos of unboxings where all the stuff was a mess inside the box. Buy this if you want a great quality quadcopter, you won't regret it. -Notice from B. Delgado, Coventry

Click to Show dji phantom p3-standard quadcopter drone 2.7k hd video camera (camcorder) Details

I've bought used articles before, but never refurbished one, so i was a bit skeptical. It came in a brown box, with good protection and well packaged, despite the seller said it sometimes comes with little scuffs or scratchs, the only signs of use that i could find were the colour stripes on the front arms and seems more like a defect or a edge folded in the sticker, so for me it has an aesthetic of 9. 5/10. I'm coming from a syma xc8; the wich i never could keep hover over a fixed place or height, so, now i'm in a different league; it is very sattisfactory to see the p3 standard "hover" in front me without touching the controls. Why i went for a refurbished instead a brand new one ? just because i was hesitate about my skills flying a drone, now maybe in a future i could buy a model with better features, for now i'm happy with the one i have.

Dji-phantom-p3-standard-quadcopter-drone-2.7k-hd-video-camera-(camcorder) set picture

- S. ValdezI have had my phantom 3 standard for about a week now and have flown about 15 flights. I am relatively new to flying quadracopters having previously flown an "ominous" ($79, lightweight, durable, no camera) for a few weeks. The "ominous" took about 10 flights before i stopped crashing it. There was a learning curve because it's so light and the controls so much more sensitive than the phantom. The phantom is steady and easy to fly. Taking still pics is great and the shots look very nice. . New edit : when i first reviewed this i noted that the video was "choppy" at times and seemed to have quick 1-2 second dropouts. Obviously, i saw that as a flaw. I had been viewing the videos on my iphone through the go app's "library". Well, this morning i plugged the memory card directly into my mac and was pleased to see that the videos were flawless. In hindsight i now realize that the app was recording the wifi feed not the actual footage recorded on the card. So now i am happy that everything works fine. I am left with impression and criticism that this product needs way better documentation/online support if it really is to be breakthrough " drone" reaching more mainstream audiences than the rc hobbyist crowd. It's well built, functions fine, easy to fly and fun, but you have to work like a dog online hunting through various websites and forums to really learn why some things do not work as you might expect. Another example. I found it almost impossible to remove the battery from the phantom and was pretty sure i would break the arms at some point. Google/youtube to the rescue with a homemade clip on a very effective technique. . Overall build quality is very high. Included instructions are minimal, so you reall have to hunt around to find tutorial videos and owners manuals. One other issue i had that was frustrating was having to do. Mandatory firmware update via wifi. After completing, i swapped to a fresh battery and headed to the elementary school around the corner for my first real flight other than in my driveway. "mandatory firmware update required" popped up again. To make a long story short, apparently the firmware upgrade was for each battery. After updating the second battery, everything was fine. . This is a fun "drone" to fly. Pretty easy to learn the flight controls and basic camera controls. I have an iphone 6 and find the screen a little small for using the app which is packed with options, but it's a minor inconvenience, nothing serious. I also really have to find a sunshade for my phone/drone screen as it is almost impossible to see it bright sunlight, even with brightness maxed out.

So i did a lot of research when deciding on what drone to buy. I ended up going with the phantom 3 standard due to us government regulations: you can't fly more than 400 feet in the air or make your drone beyond your line of sight, which made it unnecessary for me to buy a super high-end drone if i couldn't use it to its full extent. So i just needed something with a decent camera and a good control. . My phantom 3 arrived on time. You can detach the quadcopter's battery from the quadcopter and charge it separately. Meanwhile, the controller also needs to be charged. You stick your smartphone in a clamp at the top of the controller the way you may put it in a holder on the top of your car dashboard for map directions. . The quadcopter comes with stickers so you can replace the red bands. At first i didn't know how to use it so i wasted my bands by putting them on top of the red ones, not realizing i could remove the red bands first. I ruined my pink bands that way :(. . Some random facts for people who have never owned a drone:. -you can't use these to spy on people because they're loud. Not leaf-blower loud (thank goodness), but hair dryer loud. A lot of people who don't own drones talk about using them to spy on people so that's why i brought it up. -you do have to register your drone, but it was 5 bucks and the registration lasts 3 years so i wasn't bothered. -it is fairy light. The weight of a filled coke bottle or so. When i carry it around i can stick my arm through the leg handles as if it were a weird plastic handbag. . As for flight, the quadcopter has its own ssid when you turn it on. You go into your phone, connect to the ssid, and that connects your phone to the quadcopter. You go into the dji go app and you will see a livestream through the app. . Now, nothing can be poking your camera. That means a completely flat surface, not grass, because the grass will keep the camera from turning which then means the drone automatically will not fly. It took me a while to figure that out. That can be annoying when you're testing it out in a park so i wish there were a way to override that and say go ahead and fly anyway (or maybe there already is? i have my drone on beginner mode). . Flying is automatic. You drag your finger across a bar on the screen and the phantom 3 rises on its own. Landing is the same way-your drone can be a few hundred feet in the air and you just have to slide your finger across the screen and it descends slowly and carefully. In that sense it's idiot-proof, although once i flew the drone into a wall on a windy day so it's not completely idiot-proof, heh. Nothing broke but the propellers got a little scratched up, there's a black smudge that i can't get rid of no matter how hard i rub with soapy wet cloth. . The battery lasted me maybe up to 30 minutes but it starts shutting down at around 30%. I get a good 20 minutes of flight out of it though. I find myself staring at the phone's live feed. The live feed lets you either take pictures or start recording a video, so i like to fly up and then slowly turn the drone with the video recording on. I don't know whether i can include sound, as all my videos have been silent, but there are a lot of features so maybe i haven't discovered it yet. Best of all the live feed measures the height and distance from the controller you are holding: that way you can see whether your drone is 100, 200, 300 feet in the air and you don't break government regulations. I don't dare fly above 200 because i'm paranoid it will stop receiving signals from my controller. . You can also put a radius limit so that if you try to take your phantom 3 beyond that distance it will not go any further. If you keep trying to make it go beyond that point it will simply hover in place. Great protection for a newbie like me. . Now, the wind can screw things up for you because the phantom 3 is fairly light. The wind once blew my phantom 3 into a wall, another time into a bush. Thankfully both accidents happened pretty low so then phantom 3 fell only a few feet. The actual quadcopter is fine, only the propellers are a bit scratched up. . Overall it's an excellent product, i just wish i lived somewhere where i have more excuses to use it.

P. Ruff, Michigan

DJI PHANTOM P3-STANDARD QUADCOPTER DRONE 2.7K HD VIDEO CAMERA Review
Brand :    dji
Color :    White
Size :    22 inches
Weight :    8.20 pounds
Model :    P3-STANDARD
Quantity :    1
Order click here :    normally ships in 1-2 business days
Photography :    Best Camcorder (dji product review) for DJI Phantom P3-STANDARD Quadcopter Drone 2.7K HD Video Camera available as-of ( Sep 2020 )
  • View a live image streamed from the drone up to a half mile away on the free dji go app using your mobile phone or tablet
  • Refer the user manual and videos on this page for troubleshooting
  • Take stunning 2. 7k hd videos and 12 megapixel photos with the integrated aerial camera and update the remote control first before use.
  • Gps assisted flight features let you concentrate on getting great images while the drone helps you fly safely. you can achieve advanced camera perspectives with the point of interest, follow me and waypoints modes (pending app feature availability)
  • Fly up to 25 minutes with the included intelligent battery. a range of accessories is included:1 battery and charger, 2 full sets of propellers, radio controller, 8gb micro sd card

SKYREAT Gimbal Guard DJI Phantom 3 Standard -Protects Gimbal & Camera

1 x gimbal-guard for dji phantom 3 standard; 4 pcs zip cable

SKYREAT Gimbal Guard DJI Phantom 3 Standard -Protects Gimbal & CameraSKYREAT-Gimbal-Phantom-Standard-Protects

SKYREAT GIMBAL GUARD DJI PHANTOM 3 STANDARD -PROTECTS GIMBAL & CAMERA Highlight
Brand :    skyreat
Size :    P3 Standard
Model :    SK-0056
Quantity :    1
Order click here :    -
Photography :    Best Camcorder (skyreat product review) for SKYREAT Gimbal Guard DJI Phantom 3 Standard -Protects Gimbal & Camera available as-of ( Sep 2020 )
  • Pefect fit for phantom 3 standard, light weight and firmly
  • Easier & safer takeoff and landing (sand, snow, grass, trees, fence) clear camera view - you will not see the gimbal guard in frame
  • Protects your gimbal, ribbon cable & camera - (will reduce tremendously or even prevent damage to your gear)
  • Adjustable and will not interfere with the vps
  • 100% carbon fiber, design for dji phantom 3 standard

Summitlink Guards Phantom Connect Standard (7E-HLNT-D3RR) Price : 14.99, was : 0 as 2017-02-14
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Summitlink Guards Phantom Connect Standard (7E-HLNT-D3RR) Reviewed by on wujus.com

Top summitlink guards phantom connect standard (7e-hlnt-d3rr) Content

The F.A.Q. for Summitlink Guards Phantom Connect Standard (7E-HLNT-D3RR)

These worked very well. Put them on an fc40. They are a bit larger than the stock dji version, but they are made to also fit a phantom 3, which have larger props. They are sturdy plastic and snap in tight. I put the red on the front of the drone and it is great for identifying front from rear. . These made it so that i can have prop guards and use my new case https://www. Online store. Com/gp/product/b00jszi5ak/ref cm cr ryp prd ttl sol 18

A number of questions have been asked here.

Q&A

(0) Question: Do you have to replace all four screws on each arm? or can you change out just two like with the factory original dji ones?


(1) Question: Will these work with the cheerson cx20? i got a set from ebay the seller claimed was compatable but it came with 2 bags of unlabled screws(too short)


(2) Question: I'm wondering, since these pull off so easily to remove them, is there any chance they could come off in flight?


(3) Question: The vertical gap between propeller and guards is not the same as you rotate the prop. is this intentional or i have crooked/warped guards?


(4) Question: Any thoughts on whether or not these will work with the new phantom 3 models?


(5) Question: Will these fit in hardshell backpack from dji?


(6) Question: What kind of plastic are they made from? i cracked one, during a test flight. i want to make sure i use the right type of glue.


(7) Question: Is compatible with p. 2 vision + v3? do not affect motors by change the screws? do not lose stability video with this? stand firm without the cord?


(8) Question: My blades measured 9. 5", will summitlink snap on/off prop guards be large enough?



(note) Question: where/how to get Summitlink (manufacturer's brand) accessories & similiar Summitlink's products

Answer:

https://wujus.com/summitlink-guards-phantom-connect-standard-3770rfx2l6g/

Click the marked text to copy link to Clipboard

These prop guards are great. The plastic they are made of is not flimsy. Love the different colors it helps with orientation. And after reading some of the reviews about the screws being too long or no tools for installation i am shaking my head. I received two plastic bags with screws one labeled phantom 1 & 2 the other labeled phantom 3. . They also included 2 hex wrenches and instructions. Installation was fast and easy. I can only think some people reviewed the wrong product or didn't look at what was included. Really satisfied with this purchase.


Bestsellers, HobbiesTop Summitlink Guards Phantom Connect Standard (7E-HLNT-D3RR) FAQ Content

Best summitlink guards phantom connect standard (7e-hlnt-d3rr) in review

I bought a set of original prop guards as well as these snap on's due to having two different size cases for each of my drones. These feel just as durable as the real dji prop guards and also they are multicolored which is good for knowing which way the drone is facing. Also they give you double the amount of screws you need plus 2 extra per bag. Both the allen wrenches you need are in the packaging. I went out to find one for the new screws and later realized i had overlooked the one provided. All in all i just want to say these feel just as durable as the real dji prop guards.

W. Anonymous, Hammersmith and Fulham

You might like to see Twin Doll House Stair Step (Donco Kids) Bottom Bed Is Not Included. Opening Fits Twin Or Full Mattress Set. Includes 4 Drawer Chest And Magazine Rack. Accommodates 8 In. Mattress Height. Mattress Ready, Complete Slat Kit Home Furniture And Decor
  1. Feature: Opening Fits Twin Or Full Mattress Set.
  2. Feature: Includes 4 Drawer Chest And Magazine Rack.
Competitive Twin Doll House Stair Step Loft (Home Furniture And Decor) 0300 Twin Doll House Stair Step Loft (Donco
Or you might like to consider Case Club Waterproof Phantom Propellers (Case Club) The Case Club Phantom 3 Drone Case Is The Best Of The Best. It Fits The Phantom 3 Professional, Advanced And Standard. The Case Was Designed By Avid Fliers Engineering Backgrounds. Camcorder
  1. Advantages: Wheeled Case Has A Lifetime Warrenty & Is 100% Waterproof, & Dustproof. (made In Usa).
  2. Advantages: Holds Drone, Tablet (up To 12"x7"x1/2"), 6 Extra Batteries, Controller, Memory Cards, Extra Propellers, Included Silica Gel & More.
Price Fall Case Club Waterproof Dji Phantom 3 Drone Wheeled Case Silica Gel Propellers On (Camcorder) Case Club Waterproof Dji Phantom 3 Drone Wheeled Case Silica Gel Propellers On

V. Carrie, Basse-Normandie says

Video link: . . . Link above will take you to my comprehensive installation guide and review. Installation was very simple and package was labeled well. I didn't notice any drop in flight time after installation. Handling was also comparable to pre-prop guards, if not better with added mass. It is typical when having prop guards installed to have them accidentally end up in the footage. This can be prevented by the user with different techniques, you just have to be conscientious. I do include some footage of with them installed in the video. I hope the video guide and review helps! thanks for watching!

P. Lara, Corse

I've been flying dji phantom since dji phantom 1. To date, i've owned three dji phantoms and this is the first dji phantom that i have installed props guards on. I intentionally didn't install prop guards previously because they made the dji phantom 2 or dji phantom 2 vision plus too large to fit inside of a carrying case. These prop guards are excellent because they quickly snap off without tools! it's easy to land the dji phantom 2 and have the prop guards disconnected a few seconds later. These prop guards pay for themselves by saving propellers! even the most skilled dji phantom pilots damage props unexpectedly upon landing. These also help to reduced prop damage while bumping into an object unexpectedly during flight. The quick-disconnect piece remains attached below the four motors. Installing that piece was a simple process. It's just a matter of replacing the factory dji screws with the longer screw that stick through the quick-disconnect piece. These prop guards have not degraded the flight dynamics of my dji phantom 2 in any way and the red color pieces are great! i mounted them on the front of the dji phantom 2 to function as a visual way to see which end is the front of the phantom. I'll never fly a dji phantom without these prop guards! i'm so glad that these prop guards were brought to market!

T. Wilson, Tennessee says

Very well packaged and great attention to detail. I was slightly skeptical after reading other reviews, but as of october 2015, mine came with two sets of screws, each labelled, one for phantom 1 and 2, and the other for the phantom 3. Next pleasant surprise was that there were two allen wrenches included, one to remove the original phantom motor mount screws, and the other larger size for installing the new mounting screws for the phantom 3 (the one i bought). I also skeptically checked the length of the news screws and they were exactly the correct length when adding the depth of the new prop guard mounts, so no trouble at all installing. There were also 18 screws, not just the required 16 in my phantom 3 bag, nice touch. Upon removing the original phantom screws, i noticed a very small amount of blue loctite at the distal tip of the threads, so put a similar small dab of blue (medium) loctite on the new screws. When installed, the fit was perfect for the original blades for the phantom 3 professional. (i did not use the cord to connect the outsides of the individual prop guards. ) i kept the original screws if i decide i don't need the prop guards in the future. Great option for me as a new phantom user.

U. Lynette, Thurrock

Love it! easy to install and it fits perfectly on both my phantom and cheerson cx-20 drones.

S. Whiteman, Nevada says

Being a relatively new uav pilot, i had an encounter with a lamp post on about my 5th flight (prior to these prop guards. ) understandably, props stopped, phantom 3 fell like a rock about 15' to the grass. Luckily no harm done other than one broken propeller. Recognizing an immediate need for this item, i purchased them that same day. . They install easily, they snap on and off easily, and the red helps identify the orientation in the air. Today for the first time i tested their functionality - by accidentally backing my uav into some spruce trees about 50' off the ground. Other than a slight wobble and a spray of spruce needles everything worked fine - the aircraft stayed in the air and i was able to continue. Upon landing i had to wash off the green patina that the props, guards, and top of the uav got from the shower of foliage - and i'm good to fly again without damage! i'm almost positive that without these guards, i would be deciding how/where to get my phantom 3 repaired.

A. Pearce, Cambridgeshire

I purchased these prop guards for my brand new dji phantom 3 professional quadcopter. I was a bit hesitant to install them because a few reviewers on online store complained that the long screws included in the summitlink package were too long and damaged the p3p motors. . However, the prop guards fit perfectly on my quadcopter, and the screws are not too long (even when fully tightened). The guards are a bit annoying to install because you have to remove 16 screws from the chassis, but once they're on, they fit very snugly and are rock solid. The build quality is good: i tipped my drone yesterday because i tried to land on a slanted surface, and the prop guards saved the copter from a potentially very expensive impact. . A side note: after installation is complete, it may appear as though the angle of the motors has been altered (normally, the four motors point outwards slightly to increase stability). However, as long as all 16 screws are tightened firmly, the motor mounting system will prevent the motor angle from changing. Just something to keep in mind. . Get this for your p3p or p3a. You won't regret the purchase, and the quick disconnect system is awesome. Would recommend! it's worth spending $30 on these prop guards - it could save you hundreds of dollars in the case of a simple tip-over or tree encounter.

C. Wayt, Hamburg says

Four stars because these guards are tough, light weight, slip on and off easily and do a good job of protecting the propellers, but cost aircraft performance. I installed these on my phantom 3 and noted the following:. 26% reduction in top speed. Reduced climb rate. Reduced maneuverability (roll and pitch rate a little slower). Guards are visible in the camera view when cruising at higher speeds with the camera set level. . They will work great for most of my slow speed flying close to obstacles and will save a lot of broken propellers. But i'll probably remove them for flying in the wide open. The easy-on, easy-off feature is great for taking it down to pack it in the soft case. And i can still get it into my cut-out soft case with the guard receptors in place. There are no stability problems when descending with these guards in place as some have reported on youtube. I have descended with full down stick and the drone was as stable as it is without the guards.

J. Betty, Cheshire

Just got a set in the mail. They are quite sturdy and i liked the two colors and the removable feature. What is strange is there is no instructions included but you just remove motor screws and replace them with the included screws. Once snapped on they will not come off.

T. Joanna, Prince Edward Island says

I give them 5 stars simply because they are removable (huge positive) and because they are sturdy. Some reviewers wrote that they are flimsy but i tested them by whacking them on a table like a hammer and they had no damage; it's possible that the vendor might have used cheaper plastic in the past but the ones i purchased are solid as a rock. It's true about the screws and the poor instructions, but i'm handy so there were no issues. A butter-fingered person might get into trouble. . All in all i love them because i can remove them when i pack up. Here's a tip to save a few hundred bucks on a case: i bought a small fiberglass travel case (wheels, retractable handle, zipper closure) for $60 that just fits the original phantom 3 cardboard box that it came in, with about 4" to spare on the long side that holds the prop guard and some extras. Perfect fit

I. Cassella, Rheinland-Pfalz

This is by far the best idea in guards that i have seen and purchased. Placing the red guards on the front makes it incredibly easy to identify by line of sight the direction it faces. The guards go on quick with the provided tool. However, the install screws do not match the original screws. You will need a separate driver to remove the original shorter screws. Once on, the guards snap in snuggly and release quickly. . The jury is still out on the effects they have on flight. I "feel" like the phantom doesn't fly/hover as steadily with them on as it does with them off. Why is the string wrapping around each guard is important? the string does make the instant removal and attachment more difficult if you aren't careful - knots up into bird nest.

M. Alberta, Reading says

Great product. I bought mine not so much for crash protection, since the dji phantom 3 is so easy to fly, but instead for help in maintaining orientation. With the two red guards out front and the two white ones out back it's much easier to keep track of which way the drone is pointing. The best feature of all is the ability to slide the guards on and off without having to unscrew anything ( once the attachment points have been installed. ) slide off the guards and the rest of the drone can be easily stored back in it's travel case. Where there's ample room to store the guards also. A great addition that i highly recomend.

M. Sandra, Havering

1) unlike other quick-release prop-guards, these include the actual guard as well! others cost the same but only include the quick release mount. 2) they are an upsize (for 9" props) so i can run larger phantom 2 9450 props on my phantom 1. 3) they are much stronger than some other reviews here had me believe. Worst case, they are 90% as strong as the stock dji guards. 4) overall finish isn't stellar by any means, but who cares - they fit well, are solid and are easy to take on and off. 5) a negative is that they weigh 149 gms vs 77 of the (smaller) stock dji guards! that's a big increase! . . All in all, i'm quite happy with the purchase. It'll make traveling with my phantom a lot easier.



Leave a Reply

You must be logged in to post a comment.


Top summitlink guards phantom connect standard Review Content

Related Products

Product Image Gallery

Top-summitlink-guards-phantom-connect-standard-3770rfx2l6g-Content